Merge branch 'for-next/sandbox-compile-test'

clocksource: arm_global_timer.c: remove unused asm/ header ...

We don't use the header and dropping it allows us to compile-test the
driver under non-ARM architectures. Do so.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: kvx: remove unused variable np ...

Remove unused variable np from probe function.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

drivers: add COMPILE_TEST prompts for some off-by-default options ...

Some Kconfig options we have are promptless and off-by-default and
instead can only be enabled by being selected from platform options.

For some of those that aren't compile testable, add a new
COMPILE_TEST-only prompt.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: add COMPILE_TEST prompts to some on-by-default drivers ...

Many clock source and GPIO controller drivers don't have a prompt, but
are instead default y if their respective platform is enabled. Maintain
this behavior, but add a prompt for when COMPILE_TEST is enabled, so
they can be included in test builds.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: remove references to CREDITS ...

The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: kvx: Add kvx clocksource support ...

Add a clocksource for kvx architecture based on core performance
counter. This performance counter is configured to count cycles and as
such can be used to be a clocksource.

Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: rename driver for ARMv8 Timer to ARM architected timer ...

The driver matches against both "arm,armv7-timer" and "arm,armv8-timer"
compatibles, thus rename it to better reflect that it's not only ARMv8
specific.

Only functional change intended is name changes. The symbol is default
y, so the rename shouldn't cause it to get lost with olddefconfig.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "clocksource: ARMv8 timer can only be built on ARMv8" ...

This reverts commit 33ec8cb,
so that barebox can once again match against "arm,armv7-timer"
compatibles. The reverted commit restricted the timer to CPU_V8,
because in i.MX multi-image configuration with MACH_SCB9328 set,
we can have both CPU_32v7 and CPU_32v4T in the same build.

To avoid this issue properly, force use of -march=armv7-a for
non-CONFIG_CPU_V8 targets. This is acceptable as we don't expect
non-ARMv7 device trees to have the architected arm,armv7-timer.

Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: ARMv8 timer can only be built on ARMv8 ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: at91: replace __raw_{readl, writel} of peripherals with readl, writel ...

Use the potentially endianness-changing readl, writel and siblings
directly. They looks prettier and are the correct thing to do, as
even if the CPU is in big-endian mode, the peripherals are little-endian.

Unlike Linux, barebox readl,writel are the same Linux'
{readl,writel}_relaxed (they don't imply memory barriers)
and thus there shouldn't be any functional change.

Patch was generated by a mass search and replace. I looked it over,
adjust some whitespace and further verified by reviewing the output of

	git diff HEAD~1 --word-diff | \
		perl -pe 's/\[-(.*?)__raw_/{+$1/; s/-\]\{\+/+}{+/;' \
		-e 's/(\{\+.*?\+\})\1/__ALL_IS_WELL__/' | grep '+}{+'

which filters out the common case of lines where a single
__raw_{readT,writeT} had its __raw_ prefix stripped without any
further changes.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/warnings'

treewide: Make locally used functions static ...

Many functions are only used locally but still are globally visible.
Make these function static. Avoids warnings generated with -Wmissing-prototypes

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: Enable architected timer support for CPU_V7 ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/efi'

clocksource: Do not mix depends and select for ATMEL_PIT ...

CLOCKSOURCE_ATMEL_PIT was both set to yes using depends on
and using select.
Use only select to set this non-visible symbol to 'y'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

efi: cleanups ...

make local functions static and remove unused code

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/missing-prototypes'

Merge branch 'for-next/clps711x'

clocksource: clps711x: Use coredevice_platform_driver() macro ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: clps711x: Switch to SPDX identifier ...

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: clps711x: Add devicetree support ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: 32ktimer: Turn into a driver ...

Turn OMAP 32KHz timer into a driver and move to drivers/clocksource.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: omap: dmtimer: Turn into a driver ...

Turn OMAP dmtimer into a driver and move to drivers/clocksource.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: AT91: pit: Make locally used function static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

clocksource: Add dw_apb_timer driver ...

Adapt linux kernel dw_apb_timer driver to barebox.

Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: Add clocksource menu ...

Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/net-switch-mv88e6xxx'

ARM: at91: remove mach/io.h ...

Remove at91_sys_read() and at91_sys_write() since these are no longer
used. This makes mach/io.h empty so remove that aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>