arm: imx: add initial imx8mp support ...

This adds base support for the i.MX8MP SoC. Not much to do here as this
SoC is quite similar to the i.MX8M. This adds:

- Kconfig symbols
- bootsource detection
- register base address defines
- iomux defines

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

ddr: fsl: depend on ARM ...

We have inline assembly in the driver, so we can't compile-test it
unmodified on non-ARM. Indicate so in the Kconfig.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

drivers: add COMPILE_TEST prompts for some off-by-default options ...

Some Kconfig options we have are promptless and off-by-default and
instead can only be enabled by being selected from platform options.

For some of those that aren't compile testable, add a new
COMPILE_TEST-only prompt.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr: fsl: fix null pointer dereference handling DDR4 memories ...

cppcheck reports:

  drivers/ddr/fsl/util.c:42:27: error: Null pointer dereference:
	  c [ctunullpointer]
   unsigned int data_rate = c->ddr_freq;
                            ^
  drivers/ddr/fsl/ctrl_regs.c:1114:55: note: Calling function
      get_memory_clk_period_ps, 1st argument is null
   const unsigned int mclk_ps = get_memory_clk_period_ps(0);

Because get_memory_clk_period_ps expects a valid pointer, but is instead
passed NULL. Fix this by passing along the DDR controller handle like all
other calls to the function do. This is untested.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX8M: Add DDR controller support ...

This adds the DDR driver for the i.MX8MQ/i.MX8MM. It's taken from
U-Boot v2020.04-rc1 with slight modifications for barebox

The i.MX8MQ boards in the tree currently use the output of an earlier
version of the NXP i.MX8M DDR Tool which doesn't use a controller driver
but instead does most stuff in board code. It seems this can coexist
with the new driver, only a few helper functions that previously lived
in arch/arm/mach-imx/imx8-ddrc.c are now provided by the new driver.

Tested on an i.MX8MM EVK

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr: fsl: move fsl_ddr_set_memctl_regs prototype to include/ ...

fsl_ddr_set_memctl_regs() is not only used internally in the DDR
controller driver, but can also be called by the boards to configure
a static setting. Move the prototype to include/ where it can be
used by board code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ddr: fsl: Add Freescale ddr driver ...

This adds the Freescale ddr driver used on various PowerPC and
Layerscape SoCs. This is based on U-Boot-2019.01 but with many
adjustments:

- PowerPC support has been removed
- CPP #ifdeffery replaced with C
- No more global variables/functions expected from the driver,
  configuration is passed by the board code which calls the driver

We already have the driver in the tree in an older version forked from
U-Boot-2013.04. This version lacks Layerscape support and many quirks
in the driver are PowerPC specific. Since the existing driver should
work on all known PowerPC and PowerPC is a dead end I decided not to
improve the existing driver and instead add a new Layerscape specific
driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>