mci: dw_mmc: remove unused local variable ...

data_start is assigned once and never used. Drop it.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: remove now-duplicate dev->detect implementations in host drivers ...

Previous commit introduced a fall-back MCI hw_dev->detect
implementation. All drivers touched in this commit populate hw_dev, so
lets drop their now-superfluous detect implementations.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: Drop explicit devname setup code ...

Drop explicit devname setup code. Same setup will be done by
mci_of_parse().

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw: move defines to headerfile ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: convert to BIT() macro ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: remove device_d pointer ...

The pointer to the struct device_d *dev is also saved to the struct mci_host.
Get rid of it.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: Add RK3288 compatible string ...

The SDHC used in the RK2928 and RK3288 are compatible with each other.
Add a compatible string for RK3288's SDHC.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: Add support for high speed modes ...

The Synopsys DesignWare core supports 52 MHz MMC mode and 50 MHz SD
mode, so add the cap flags so they are used.

This works on socfpga.  The other user of this driver is Rockchip and
the datasheet I found for the RK30xx indicated it supported highspeed
modes as well.

The Linux kernel has DT properties, e.g. "cap-mmc-highspeed", but none
of the drivers in barebox support this at all.  They all specify flags
in their code.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: Delete devname in platform_data ...

Nothing used it.

Also delete the local mci alias pointer to host->mci in
dw_mmc_probe().  It only saved a few characters and all the references
but one are using host->mci.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: dw_mmc: socfpga: Supply bus-width in platform_data ...

Since there is no OF support in the xloader on socfpga it uses the
platform_data system.  There needs to be a way to supply the
equivalent of the DT property bus-width this way to support devices
that need to use a smaller bus.

So that we don't need to put every flag that might get added to the
MMC_CAP list into platform_data, just put the bus width ones into
platform_data.

The socfpga dts sources specify a bus-width of 4 so use that in the
platform_data for socfpga.

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MMC: dw_mmc: PIO mode fixes ...

Simplify PIO mode routines.
Fix a bug when IO is possibly performed twice because of using old
interrupt status.
Support for slow-speed card writes.

Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/streaming-dma' ...

Conflicts:
	drivers/mci/dw_mmc.c

MCI: dw-mmc: convert to streaming DMA ops ...

Move to the common streaming DMA ops in order to get rid of
the direct usage of the ARM MMU functions for the cache
maintenance.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: move DMA alloc functions to dma.h ...

This better separates the DMA from the MMU functionality.

Also move all drivers that only depends on asm/mmu.h for the alloc
functions over to the common header.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: change dma_alloc/free_coherent to match other architectures ...

As a lot drivers currently rely on the 1:1 virt->phys mapping on ARM
we define DMA_ADDRESS_BROKEN to mark them. In order to use them on
other architectures with a different mapping they need proper fixing.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MMC: dw_mmc: Add support for PIO mode and Rockchip variant of this hardware ...

Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: remove address of the Free Software Foundation ...

The FSF address has changed; The FSF site says that
address is

  Free Software Foundation
  51 Franklin Street, Fifth Floor
  Boston, MA 02110-1301
  USA

(see http://www.fsf.org/about/contact/)

Instead of updating it each time the address changes,
just drop it completely treewide.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: add designware mmc controller support ...

Based on the U-Boot driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>