spi: Add fsl-dspi driver ...

The fsl-dspi is found on Freescale Vybrid, Coldfire and Layerscape SoCs.
This adds the driver based on the Linux driver as of v5.5. Coldfire
support has been dropped as it's rather obsolete. Vybrid support has
been dropped because it needs the DMA engine support we do not have in
barebox. What's left is support for Layerscape where this driver has
been tested on.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add Zynq QSPI controller driver ...

This adds the driver for the QSPI controller found on
the Xilinx Zynq SoCs.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add atmel-quadspi support ...

This adds support for the Atmel quadspi device. Ported from Linux-5.2.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add driver for Freescale QSPI controller ...

This is based on the Linux v5.1-rc1 driver introduced with the commit:

  commit 84d0431
  Refs: v5.0-rc1-1-g84d043185dbe
  Author:     Frieder Schrempf <frieder.schrempf@kontron.de>
  AuthorDate: Mon Jan 7 09:29:47 2019 +0000
  Commit:     Mark Brown <broonie@kernel.org>
  CommitDate: Mon Jan 7 16:56:24 2019 +0000

      spi: Add a driver for the Freescale/NXP QuadSPI controller

      This driver is derived from the SPI NOR driver at
      mtd/spi-nor/fsl-quadspi.c. It uses the new SPI memory interface
      of the SPI framework to issue flash memory operations to up to
      four connected flash chips (2 buses with 2 CS each).

      The controller does not support generic SPI messages.

      This patch also disables the build of the "old" driver and reuses
      its Kconfig option CONFIG_SPI_FSL_QUADSPI to replace it.

      Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
      Acked-by: Han Xu <han.xu@nxp.com>
      Reviewed-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
      Tested-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
      Tested-by: Han Xu <han.xu@nxp.com>
      Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
      Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: Extend the core to ease integration of SPI memory controllers ...

Sync with Linux v5.1-rc1.

This is the barebox adoption of the commit

  commit c36ff26
  Author: Boris Brezillon <boris.brezillon@bootlin.com>
  Date:   Thu Apr 26 18:18:14 2018 +0200

      spi: Extend the core to ease integration of SPI memory controllers

      Some controllers are exposing high-level interfaces to access various
      kind of SPI memories. Unfortunately they do not fit in the current
      spi_controller model and usually have drivers placed in
      drivers/mtd/spi-nor which are only supporting SPI NORs and not SPI
      memories in general.

      This is an attempt at defining a SPI memory interface which works for
      all kinds of SPI memories (NORs, NANDs, SRAMs).

      Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
      Reviewed-by: Frieder Schrempf <frieder.schrempf@exceet.de>
      Tested-by: Frieder Schrempf <frieder.schrempf@exceet.de>
      Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: i.MX: Add driver for DSPI ...

Add driver for DSPI - SPI IP core found on various Freescale/NXP
products (including Vybrid/VF610).

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: Add SPI GPIO bitbang driver ...

This adds a driver for SPI master by GPIO pins.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add controller driver for Atheros AR7XXX/AR9XXX SoCs ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add Marvell MVEBU SoC SPI driver ...

This adds support for the SPI controller found on Marvell MVEBU SoCs
(Dove, Kirkwood, Discovery Innovation, and Armada 370/XP). Current driver
is DT only. Compatible strings are provided for Orion (common denominator),
Armada 370/XP and Dove SoCs.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

SPI: Add i.MX 23/28 SPI driver support ...

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/spi: add driver for the Multichannel SPI controller found in TI SoCs ...

Also create devices for OMAP3.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add atmel-spi driver ...

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nios2: Add Altera SPI master driver ...

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Move mfd drivers to drivers/mfd ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This is Kconfig cleanup patch (not all configurations will use CFI, SPI, RAMFS and DEVFS). ...

* Enable CFI and SPI drivers menuconfig option to be able to disable them in menuconfig.
* Introduce capability to disable ramfs and devfs.

beginning of SPI support