spi: mvebu: improve error reporting ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: add LSB support ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: use wait_on_timeout instead of a loop with udelay. ...

This looks nicer and reduces the time to transfer 40 MB at 50 MHz from
203 seconds to 87 seconds.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: only read from bus when data is needed ...

This optimization reduced the time to transfer 40 MB at 50 MHz from
214 seconds to 203 seconds.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: various non-critical improvements to armada_370_xp_spi_set_baudrate ...

- Initialize pdiv in declaration
 - fix format specifiers
 - simplify range check, pdiv can never be > 7

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: make sure the value calculated for PSCL is also used ...

The function used a separate variable to hold the value calculated and
only used it for range checking but then didn't use it.

This fixes calculation for slow baud rate that require a divider > 15.

Additionally fix the rounding.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: fix register macros for Armada 370/XP clock divider ...

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: fix error handling for transfer problems ...

When a message transfer fails no further messages are transferred, but
the error value was not propagated to the caller.

Fixes: 5db1a578d6ed ("spi: add Marvell MVEBU SoC SPI driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: fix baudrate selection for Armada 370/XP ...

There are two problems that made the driver choose the wrong baudrate
calculation algorithm:

a) The compatible used on 370/XP isn't marvell,armada-370-xp-spi but
   marvell,armada-370-spi or marvell,armada-xp-spi respectively.
b) The probe function uses
   	match = of_match_node(mvebu_spi_dt_ids, dev->device_node);
   to determine the right algorithm. As the devices are also compatible
   to marvell,orion-spi and this comes first in mvebu_spi_dt_ids[]
   it's always the older Orion algorithm that is used.

This patch fixes both problems.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: mvebu: make more than one device on a bus work ...

The mvebu socs support up to 8 chip selects. Make use of them.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: use 'const void *' for struct of_device_id.data ...

Since 2011 barebox' of_device_id struct uses unsigned long type for data field:

    struct of_device_id {
            char *compatible;
            unsigned long data;
    };

Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.

E.g. see 'git grep -A 4 of_device_id drivers/' output:

    drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
    drivers/ata/sata-imx.c- {
    drivers/ata/sata-imx.c-         .compatible = "fsl,imx6q-ahci",
    drivers/ata/sata-imx.c-         .data = (unsigned long)&data_imx6,
    drivers/ata/sata-imx.c- }, {

Here is of_device_id struct in linux kernel v4.0:

    struct of_device_id {
            char name[32];
            char type[32];
            char compatible[128];
            const void *data;
    };

Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.

Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:

    @rule1@
    identifier dev;
    identifier type;
    identifier func;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type)
    + dev_get_drvdata(dev, (const void **)&type)
    ...>
    }
    @rule2@
    identifier dev;
    identifier type;
    identifier func;
    identifier data;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type->data)
    + dev_get_drvdata(dev, (const void **)&type->data)
    ...>
    }

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: Call spi_of_register_slaves from core ...

Makes individual handling of OF spi slaves unnecessary in the bus drivers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

spi: add Marvell MVEBU SoC SPI driver ...

This adds support for the SPI controller found on Marvell MVEBU SoCs
(Dove, Kirkwood, Discovery Innovation, and Armada 370/XP). Current driver
is DT only. Compatible strings are provided for Orion (common denominator),
Armada 370/XP and Dove SoCs.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>