LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers / video / Makefile

2018-06-21	782dd52 Browse files » video: Port RAVE SP backlight driver from Linux kernel ... This is a minimal port of a kernel commit 6552d3141064 ("backlight: Add RAVE SP backlight driver"). All of the changes were kept to a minimum and limited to impedance matching between Barebox/Linux driver API. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 19 Jun 2018 Sascha Hauer committed on 21 Jun 2018
2017-03-13	97d2da3 Browse files » Merge branch 'for-next/video' Sascha Hauer committed on 13 Mar 2017
2017-03-09	6518b21 Browse files » video: add EFI Graphics Output Protocol support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 6 Mar 2017 Sascha Hauer committed on 9 Mar 2017
2017-03-06	52e9a84 Browse files » video: add support for Solomon SSD1307 OLED controller family ... It was ported from linux v4.10. Like the kernel driver only communication via I2C is supported. It has only been tested with a SSD1306 and a 96x16 OLED display: &i2c0 { status = "okay"; ssd1306: oled@3c { compatible = "solomon,ssd1306fb-i2c"; reg = <0x3c>; reset-gpios = <&gpio1 1 0>; solomon,height = <16>; solomon,width = <96>; solomon,page-offset = <0>; solomon,com-invdir; solomon,com-seq; }; Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bastian Stender authored on 28 Feb 2017 Sascha Hauer committed on 6 Mar 2017
2016-08-25	46e30c9 Browse files » video: tc358767: add eDP video encoder driver ... This patch adds support for the Toshiba TC358767 eDP bridge, connected via DPI. Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Gusakov authored on 24 Aug 2016 Sascha Hauer committed on 25 Aug 2016
2016-01-04	295d676 Browse files » bcm2835: introduce mach-bcm283x ... This patch changes the most part of mach-bcm2835 to mach-bcm283x. This prepares to add RPi2 support which is a bcm2836. This patch changes the Kconfig entry namens to BCM283X for drivers only. These drivers should working the same in bcm2836. While updating defconfig I added LED support/trigger option. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Aring authored on 19 Dec 2015 Sascha Hauer committed on 4 Jan 2016
2015-08-07	98b5672 Browse files » Merge branch 'for-next/vpl' Sascha Hauer committed on 7 Aug 2015
2015-07-20	27f79c0 Browse files » video: implement framebuffer console ... This patch realizes framebuffer console support for barebox. It supports colors and enough escape sequences to show the barebox console and editor properly. fbconsole mini-HOWTO ==================== 1. compile sandbox barebox with CONFIG_VIDEO=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_DRIVER_VIDEO_SDL=y 2. run barebox 3. test fbconsole fbconsole0.active=oe Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 8 Jul 2015 Sascha Hauer committed on 20 Jul 2015
2015-07-13	427d637 Browse files » video: Add simple-panel support ... This adds support for simple panels. These are panels which don't need special handling but can have enable gpios and such. Unlike the Linux kernel implementation this one is able to understand display-timings nodes so that it's not necessary to keep a list of all known displays with their corresponding timings in barebox. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Jul 2015
	2d8b66a Browse files » video: Add MTL017 LVDS encoder support ... The MTL017 is found on the Efika Smartbook. Not much is known about this chip, so this driver only programs a register dump which is suitable for some panels. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Jul 2015
	7000703 Browse files » video: Add Video Pipeline (VPL) support ... Complex video pipelines are modelled with the of_graph bindings in the devicetree. This patch adds a ioctl infrastructure to issue commands to the remote endpoint of a of_graph. Currently defined ioctls are prepare/unprepare, enable/disable and get_modes. This is enough to control LVDS or HDMI encoder or simple panels. A device node which contains of_graph endpoints can be registered as a VPL entity. An entity can receive ioctls via the .ioctl callback and also issue ioctls by calling vpl_ioctl. The core itself will never iterate over the entire pipeline. Instead, the different VPL entities should forward an ioctl to the next instance in the pipeline whenever necessary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 13 Jul 2015
2015-06-12	3149ad2 Browse files » video: Add PWM backlight support ... This adds a backlight driver for backlights controlled by a PWM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Jun 2015
2015-06-12	e3ea908 Browse files » video: Add backlight support ... This adds a small backlight layer. It provides a backlight device on which the brightness parameter can be used to adjust the brightness. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Jun 2015
2014-03-29	e5af227 Browse files » video: Add i.MX IPUv3 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	939c653 Browse files » video: Add edid support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	3868765 Browse files » video: Add display timing from devicetree helper ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
2013-11-06	97607e8 Browse files » video: set up the kernel's simple framebuffer driver ... Add support to configure the active framebuffer for the kernel through device tree. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 4 Nov 2013 Sascha Hauer committed on 6 Nov 2013
2013-11-06	91b3761 Browse files » video: add a BCM2835 framebuffer driver ... Use the mailbox driver to set up a framebuffer based on the firmware configuration. Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andre Heider authored on 4 Nov 2013 Sascha Hauer committed on 6 Nov 2013
2013-06-24	6cb031a Browse files » omap-fb: add driver ... This patch adds omap display controller support. Currently only OMAP4 DSS is supported. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 19 Jun 2013 Sascha Hauer committed on 24 Jun 2013
2013-01-31	f15fb7b Browse files » video: add Atmel HLCD support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 31 Jan 2013 Sascha Hauer committed on 31 Jan 2013
2013-01-31	0f9770a Browse files » atmel_lcdfb: factorise common code between lcdc and new hlcdc IP ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 31 Jan 2013 Sascha Hauer committed on 31 Jan 2013
2013-01-28	39ca268 Browse files » video: add atmel lcdc frambuffer support ... This IP is present on the at91sam9 until the sam9g45, on the sam9x5 we use a new IP. This driver is based on the linux one. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 27 Jan 2013 Sascha Hauer committed on 28 Jan 2013
2012-09-25	9d73b51 Browse files » sandbox: add sdl video support ... This will allow speed up the dev on framebuffer. By default the resolution is VGA but this can be changed via cmdline. We use a pthread to Flip the screen every 100ms as we can not detect when barebox update it as barebox simpliy write in a buffer. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 12 Sep 2012 Sascha Hauer committed on 25 Sep 2012
2012-01-02	b5a92c0 Browse files » MACH SAMSUNG/S3C: Reflect the CPU name the LCD driver is for ... This LCD driver is for the LCD controller in the S3C2410/S3C2440 CPUs only. Change its name to reflect its usage and free the way to add LCD controller drivers for more recent Samsung CPUs. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 2 Jan 2012 Sascha Hauer committed on 2 Jan 2012
2011-12-12	905f3cc Browse files » drivers/video: add PXA framebuffer support ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Jarzmik authored on 11 Dec 2011 Sascha Hauer committed on 12 Dec 2011
2011-05-19	2d88cc4 Browse files » Add support for Samsung S3C24x0 framebuffer. ... Heavily based on original Juergen Beisert's code. Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 18 May 2011 Sascha Hauer committed on 19 May 2011
2010-12-21	85f47a9 Browse files » ARM STM/i.MX: Add video driver for i.MX23/i.MX28 ... Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 20 Dec 2010 Sascha Hauer committed on 21 Dec 2010
2010-02-16	1568957 Browse files » drivers/video/Makefile: cleanup proper indention ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 16 Feb 2010
2009-12-09	4f24fe1 Browse files » fb: Add a i.MX IPU framebuffer driver ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen nogit Beisert authored on 7 Dec 2009 Sascha Hauer committed on 9 Dec 2009
2009-07-31	79baaa5 Browse files » Add framebuffer support ... This patch adds framebuffer support and a driver for i.MX[12] framebuffer devices. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Jul 2009