ARM: stm32mp: add Linux Automation MC-1 support ...

This adds support for the Linux Automation GmbH MC-1 board built around
the Octavo Systems OSD32MP157C-512M SiP.

The device tree is based on the one in linux-stm32/stm32-next, which
will probably be merged for Linux v5.8-rc1. Instead of waiting that
long, we import it here with some stuff removed/changed, so it's usable
for both barebox and Linux, without the prerequisite patches.

The non-barebox specific parts have been moved into separate DTSIs
(arch/arm/dts/stm32mp{157c-lxa-mc1,15xx-osd32}.dtsi), so both can be
dropped after the v5.8-rc1 sync with only include path change necessary
in arch/arm/dts/stm32mp157c-lxa-mc1.dts.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp: generate STM32 images ...

Both STM32MP BootROM and TF-A first stage expect subsequent bootloader
stages to feature a specific STM32 file header. Generate this image
type by default.

If for some reason, the image without stm32 header is required, the
start_stm32mp157c_dk2.pblb can be used.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

images: add support for generating STM32MP images ...

Both STM32MP BootROM and TF-A first stage expect subsequent bootloader
stages to feature a specific STM32 file header. Add a stm32image
utility to address this.

Signed-off-by: Marco Felsch <marco.felsch@gmail.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp: fix some misnomers/typos ...

The arch was renamed to stm32mp, so it doesn't look out of place when
the stm32mp2 is released. Fix spotted comments/labels with the old
name. While at it, fix a typo about the SoC name on the DK2 board.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp: add entry point, not point.pblb to pblb-y ...

Other images/Makefile.${arch}s, e.g. images/Makefile.imx, populate
pblp-* with the entry points to build, not the pbl file that's
generated. Adjust the images/Makefile.stm32mp  to do the same.

Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: stm32mp1: rename to stm32mp ...

Serial and clk driver both depend on CONFIG_ARCH_STM32MP1,
so either the Kconfig symbol or their depend needs to change.

Patches posted by the vendor to Linux, U-Boot and their BSP
Yocto-Layer speak of a STM32MP-Family of which the STM32MP1
is the first series, thus rename the arch by dropping the 1.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>