treewide: remove references to CREDITS ...

The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add ifdown support and command ...

ifdown is the counterpart to ifup and disables one or all ethernet
interfaces.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ifup command: add ethernet device completion ...

ifup usually takes an ethernet device, so use ethernet device completion
for the command.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Open ethernet devices explicitly ...

Open ethernet devices explicitly rather than implicitly when sending
packets. This allows us to not only enable, but in the next step to
also disable ethernet devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: on ifup -a only detect devices when necessary ...

For network boot we once used to hardcode eth0, but in latest changes
this was changed to work with different network devices and the 'ifup
eth0' was replaced with 'ifup -a' which lead to the result that we now
detect all devices in order to eventually also bring up USB network
adapters. In most of the cases this is not desired. When a board has
internal network support this is likely to be used. With this patch
we only detect all devices when we do not have a network device already.
For the unusual case in which a USB network adapter shall be used
even when an internal network interface is present we introduce the
global variable "global.net.ifup_force_detect" which can be used to
force detection of devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add linuxdevname property ...

When you have a static network environment but more than one network
device on your machine it is necessary to provide the <device> parameter
to the ip parameter at kernel cmd line.

The device name assigned by Linux cannot in general be predicted as it
depends on driver bind order.

This patch introduces a new property linux.devname to eth devices.
The value is added to bootargs per interface and can be changed in
env/network/INTF

Based on patch by Gavin Schenk <g.schenk@eckelmann.de>.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Provide new way to configure network devices ...

This provides a new way to configure network interfaces based
on nvvars. A network interface can now be configured with variables
in the nv.dev.<ethname>.* namespace. There is a new network device
parameter "mode" which specifies the mode used to obtain IP settings.
The mode can be "dhcp", "static" or "disabled":

nv.dev.eth0.mode=dhcp
(ipaddr, netmask are ignored in this setting)

nv.dev.eth0.mode=static
nv.dev.eth0.ipaddr=192.168.0.17
nv.dev.eth0.netmask=255.255.0.0

nv.dev.eth0.mode=disabled

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ifup: Use dhcp C API rather than running command ...

DHCP has a C API, so use it instead of running as command.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ifup: Factor out a eth_discover function ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: remove "current" network device ...

Now that we can do routing we no longer need a "current"
network device. Remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: dhcp: Allow to specify network device ...

Instead of allowing to DHCP only on the "current" network
device, allow to specify the desired network device. This
is a first step to get rid of the concept of a "current"
network device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Use a single gateway ...

There is not much point in having a network device specific
gateway. If barebox really is part of such a complicated network
in which it needs multiple gateways, then we probably need a
real routing table. Until this happens, a single gateway should
be enough.

This introduces global.net.gateway which holds the gateway ip. The
previously used device specific <ethx>.gateway variables still exist,
but are only aliases for the single gateway.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: dhcp: Do not overwrite serverip if it is valid ...

Some DHCP servers provide the wrong serverip in which case
it is desired to specify it manually and won't let the dhcp
command overwrite it.
This has previously been done by setting the serverip again
to the desired value after dhcp has been executed. With this
patch we do not overwrite it in the first place if it is valid
already. This is necessary when the serverip is not set via
/env/network/eth* but via nv.net.server.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: introduce global.net.server ...

The server to use is independent of the network device, there is
not much point to make the server specific to a network device.

This introduces global.net.server as the serverip which is
used as standard NFS/tftp server. The previously used eth
device specific parameters still exist, but are only aliases
for the global single variable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: add linux.bootarg parameter from ifup call ...

This sets a `ip=dhcp` or
`ip=<clientip>:<serverip>:<gatewayip>:<netmaskip>::<iface>:` bootarg for
the network device upon execution of 'ifup'. This is the only point
where we can distinguish between a static ip and a dhcp-based network
setup and thus set a valid bootarg options as it will be required for
nfs boot, for example.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ifup: fix handling when ip env is not given ...

This patch handles the ip env to "" if no ip env is given. Otherwise
we get a NULL pointer derefence.

Signed-off-by: Alexander Aring <aar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

string: Fix (v)asprintf prototypes ...

Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ifup: Add comment why xxx-discover files have to be skipped ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ifup: skip *-discover files for ifup -a ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/net' ...

Conflicts:
	drivers/net/dm9k.c

net: ifup: Set current ethernet device when doing ifup ...

When doing an ifup set the current interface to the one just
brought up so that it is actually used.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: harmonize in-barebox documentation ...

This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:

* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
  options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
  is listed by character in this (short) option string (the long
  description is in the long help text, as before)
* help texts have been reworked, to make them
  - sometimes smaller
  - sometimes describe the options better
  - more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
  macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
  all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
  is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
  errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
  compiled long help texts
* 'help -v' gives a list of commands with their short description, this
  is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: group 'help' output ...

The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.

The old output format (plus grouping) is now available with 'help -v'.

Example:

   Information commands:
     ?, devinfo, help, iomem, meminfo, version
   Boot commands:
     boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
   ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/ifup.c: avoid setting the MAC twice ...

The command always sets the MAC address of the interface in the code path.
For the static network configuration case it sets it again, due to the
environment variable keyword ("ethaddr") is listed again in the table.
Remove this keyword from the table, because the MAC is already set.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/ifup.c: don't fail silently ...

Since commit a162dfe the ifup command is
implemented in C and runs up to two external scripts.
If one of these scripts return with an error code, the command terminates
silently. This can confuse a user because there is no hint about the reason
why it fails. Add error messages to avoid this case.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ifup: set serverip to provided value when doing dhcp ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add ifup support ...

The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>