This adapts all files that were identifed by licensecheck
(https://salsa.debian.org/build-common-team/licensecheck.git) as
licensed under the GPL.

The advantage is that these specifiers are machine-parseable which helps
license conformance, e.g. for packaging barebox in Debian.

While touching these files also do some minor comment reformatting to
get some uniform layout.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The CREDITS file was removed from barebox in 2015 by commit 6570288f2d97
("Remove the CREDITS file"). Remove references to it from several files.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The board's set_muxconf_regs is declared in the C file using it and
defined in another file without a header file providing the prototype.
Add a header file to avoid compiler warnings.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox_arm_reset_vector() is a global function but we never provided a
prototype anywhere. The prototypes differ for the different boards, so
to provide a common prototype we must harmonize them.

void barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)

Should be suitable for all boards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This file originates in Linux.  Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.

This commit was generated by the following commands:

  find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
  git mv include/sizes.h include/linux/

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Mostly to make it clear that boarddata needs to be
something we can dereference.

As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap_save_bootinfo derefences the argument passed to barebox without
checking it for validity. This breaks 2nd stage booting where r0
is undefined. The best we can do is to check whether the pointer is
somewhere in SRAM and is word aligned. This at least makes sure that
we do not oops. This introduces SoC specific xxx_save_bootinfo variants
since the SRAM addresses/sizes differ between SoCs.

Additionally fix the prototype for omap_save_bootinfo. It uses r0, so
it must be passed this variable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The ROM loader passes the address of a buffer to the MLO in
register 0. Store this data so we can find the boot source later.
On the same way the bootinformation are passed to the barebox,
then. It has to be enshured that r0 contains always the
buffer or the boot source detection will not work.

Applied this on all OMAPs. This patch is based on work of
Jan Luebbe <jlu@pengutronix.de>.

Compile tested on all OMAP boards.
Tested on pcm049, phyCARD-A-L1 and pcm051.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

For OMAP4460 omap4_scale_vcores must set the voltage according to mpu freq.

OPP100  700MHz 1210mV
OPPTB   920MHz 1320mV
OPPNT  1200MHz 1380mV

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reset is confusing with the cpu reset and impossible to grep

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

We have enough places which setup0 a stack to justify
a static inline function for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: vj <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	arch/arm/cpu/start-reset.c
	arch/arm/include/asm/barebox-arm.h
	arch/arm/mach-omap/Kconfig
	arch/arm/mach-omap/omap3_core.S

On some SoCs (for example AM35xx), the ROM bootloader passes useful
information in r0 when jumping to barebox.

To avoid overwriting this in the generic reset code, we introduce
common_reset as a C function and as an assembler macro. This is then
called form the reset entry point (either in common or in board code).

This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

based on: [U-Boot] [PATCH v 4/5] omap4: support TPS programming
TPS62361 is the new power supply used in OMAP4460 that
supplies vdd_mpu.

VCORE1 from Phoenix supplies vdd_core and VCORE2 supplies
vdd_iva. VCORE3 is not used in OMAP4460.

Signed-off-by: F. Gasnier fabrice.gasnier@cenosys.com
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scale_vcores is used by two boards.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This patch adds support for the TI omap4 panda board.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>