Merge branch 'for-next/oftree' ...

Conflicts:
	drivers/of/base.c

Merge branch 'for-next/commands'

commands: Add of_node command ...

This command allows to create/delete device nodes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: Add of_property command ...

The of_property command allows to modify/add/delete properties.
Parsing user input is based on U-Boot code with some fixes added
for catching invalid input.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add let command which supports proper arithmetic ...

This command works like the corresponding Unix shell command and
is used for adding, multiplying and much more.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add ubiformat ...

Imported from mtd-utils and stripped down to needed functionality.
Based on an older version (1.4.5.) since the newer do use MEMWRITE
interfaces which we don't have in barebox (yet).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ymodem'

Merge branch 'for-next/spi'

Merge branch 'for-next/misc' ...

Conflicts:
	commands/Makefile

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx' ...

Conflicts:
	arch/arm/boards/guf-neso/lowlevel.c
	arch/arm/boards/pcm038/lowlevel.c
	commands/Makefile

commands: remove old Y-Modem implementation ...

As a new implementation of Y-Modem protocol is available,
switch from old implementation to the new one :
 - remove old xyzModem* files
 - remove old command loady2
 - rename command loady2 to loady

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: change Y-Modem implementation ...

The current Y-Modem implementation has some limitations:
 - Y-Modem/G protocol is not supported
 - Multiple files (aka. batch) transfers are not supported
 - Transfer speed over fast lines (USB console) is slow
 - Code is not trivial to maintain (personnal opinion)

This implementation tries to address all these points by
introducing loady2 command.

The effects are :
 - transfer speed for Y-Modem over USB jumps from 2kBytes/s
   to 180kBytes/s
 - transfer speed for Y-Modem/G jumps to 200kBytes/s
 - multiple file transfers are possible

This command was tested on a USB console and UART 9600bps
serial line :
 - NAKs (and retransmissions) were tested for faulty
   serial lines
 - multiple file transfers were tested
 - Y-Modem, Y-Modem/G and X-Modem transfers were tested

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce spi command ...

usefull to debug spi

The command allow to read/write on a spi device

Usage: spi [OPTION] [data to write 0xXX]
write/read spi device.
  -b <bus_num>  spi bus number (default = 0)
  -r <count>    to read
  -c <cs>       chip select (default = 0)
  -m <mode>     spi mode (default = 0)
  -f <hz>       max_speed_hz (default = 1MHz)
  -w <bit>      bits_per_word (default = 8)
  -v            verbose

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add filetype command support ...

This adds support for a filetype detection command. It can be
used to print a filename on the console or to set a variable
with the detection result for use in shell scripts.
The command also has an option to print the known filetypes
so that a user knows what to match for.

Based on an earlier version from Jean-Christophe.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add 'miitool' command to view media-independent interface status ...

This command is based on the 'mii-diag' and 'mii-tool'
Unix utilities, but it lacks routines to manipulate
MII state (e.g. reset MII, restart autonegotiation
or force MII mode).

This version of the 'miitool' command has no GbE support,
but we can upgrade it in the future. The GbE support
patch for generic 'mii-tool' is here
http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz

EXAMPLE:

barebox:/ miitool -vv /dev/phy0
negotiated 100baseTx-FD, link ok
  registers for MII PHY:
    3100 782d 0013 78e2 01e1 45e1 0007 2001
    0000 ffff ffff ffff ffff ffff ffff ffff
    0084 4780 0000 0000 0422 0000 0000 0000
    0000 0000 0080 0000 ffff 0000 0000 3660
  product info: Level One LXT971A rev 2
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add in-system barebox update infrastructure ...

Currently in-system update means to write an arbitrary file to
an arbitrary device. There is no sanity check if the flashed image
is of the right type or will fit onto the device. Furthermore some
SoCs need a special preparation step for their images before
flashing them.

This adds a barebox in-system update infrastructure. Boards can
register update handlers which know how to make the board bootable.
The available handlers can be listed to be able to select one,
different force levels give the user the chance to know it better.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: Add clk commands ...

This adds some basic commands to manupulate clocks on the command
line. Right now we have:

- clk_set_parent
- clk_set_rate
- clk_enable
- clk_disable
- clk_dump

The commands work based on the clock name, otherwise they behave like
the Linux Kernel C functions. clk_dump will dump the clocktree to the
console.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tftp'

net: Add tftp command which uses the new tftp code ...

Traditionally tftp is a command of its own. Since we can
mount tftp as a filesystem we have duplicated the tftp code, the old
code is used by the tftp command, the new by the filesystem support.
This adds a tftp command based on the filesystem support to preserve
backward compatibility. This allows us to remove the old tftp support
in the next step.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bmp: rename it to splash ...

so be can add more format support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

command: add ln support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

command: add readlink support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

stddev: make it selectable via Kconfig ...

enable is by default for simple and hush
we do not need to NO_SHELL

this allow to save 1KiB

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/poweroff'

Merge branch 'for-next/devnull' ...

Conflicts:
	commands/mem.c

Merge branch 'for-next/watchdog'

Merge branch 'for-next/misc'

Add dirname command ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add basename command ...

The basename command allows to set an environment variable with
the basename of a path.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add 'poweroff' command ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>