LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2013-03-25	5a1d6da Browse files » gpio_keys: detect keys pressed before booting ... If a key is pressed but not released before booting and the key is connected to an active low gpio it's not detected. This patch solves that. Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 16 Mar 2013 Sascha Hauer committed on 25 Mar 2013
2013-03-25	4b6cd0e Browse files » twl6030: add power button as an input key ... Signed-off-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Vicente Bergas authored on 11 Mar 2013 Sascha Hauer committed on 25 Mar 2013
2013-03-15	58926bd Browse files » macb: fix gem_recv circular buffer handling ... as we use a full buffer no need to check the SOF and reset the rx_tail fix at the same time the gem detection so we can have the rx_buffer allocated correctly according to the IP Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 13 Mar 2013 Sascha Hauer committed on 15 Mar 2013
	87eebfe Browse files » clk: Add is_enabled callback ... This allows us to better detect whether a clk is enabled or not. - If we can ask a clk, ask it. If it's enabled, go on and ask parents - If we can't ask it, but it can be enabled, depend on the enable_count. if it's positive, go on and ask parents - If we can't ask it and it cannot be enabled, assume it is enabled and ask parents. This makes the CLK_ALWAYS_ENABLED unnecessary, since the fixed clk now always returns 1 in its is_enabled callback. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Mar 2013
	a613c68 Browse files » driver/serial: stm-serial: fix flush ... Wait until fifo is empty, not until fifo is not full. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 14 Mar 2013 Sascha Hauer committed on 15 Mar 2013
	b304bb0 Browse files » driver/serial: auart: fix flush ... Actually wait until fifo is empty. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 14 Mar 2013 Sascha Hauer committed on 15 Mar 2013
2013-03-14	6c370ee Browse files » gpio: allocate gpio_desc table dynamically ... Some systems are runnignfrom a very limited SRAM, but have a huge malloc space in SDRAM. The bss normally is in SRAM, so we should avoid having big structures there. The gpio_desc table is 3072 bytes big, so allocate it dynamically instead. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Mar 2013
	1a66a77 Browse files » bus: Make struct device a pointer ... struct bus_type contains an embedded struct device_d which is quite a big structure. Dynamically allocate this instead to save the space in the binary. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Mar 2013
	e4588cf Browse files » Introduce device_spi_driver() macro and use it for SPI drivers ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 Mar 2013 Sascha Hauer committed on 14 Mar 2013
	4f255f7 Browse files » I2C: Rename i2c_register_driver() for using with register_driver_macro() ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 Mar 2013 Sascha Hauer committed on 14 Mar 2013
	2f65379 Browse files » SPI: Rename spi_register_driver() for using with register_driver_macro() ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 Mar 2013 Sascha Hauer committed on 14 Mar 2013
	54cbf39 Browse files » Introduce console_platform_driver() macro and use it for serial drivers ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 Mar 2013 Sascha Hauer committed on 14 Mar 2013
	aeaeb40 Browse files » Add more drivers to using device_platform_driver() ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 Mar 2013 Sascha Hauer committed on 14 Mar 2013
2013-03-13	2e7d66f Browse files » usb: chipidea-imx: Fix usb initialization ... This patch fix chipidea-imx usb initialization. "imx_chipidea_port_init" was moved before PORTSC setup in the commit "USB i.MX chipidea: implement post init support". This change breaks usb function with ULPI. Patch moves port initialization back after PORTSC setup, so it works again. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 12 Mar 2013 Sascha Hauer committed on 13 Mar 2013
2013-03-12	e748e6c Browse files » scripts: Add dtc ... This adds the devicetree compiler to barebox. This is taken without changes from Linux v3.8 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 12 Mar 2013
2013-03-12	b5c1671 Browse files » usb/gadget/Kconfig: fix menu ... by reordering the entry, USB gadget support is now a menu and the USB gadget choices are under this menu and not directly in the driver menu. Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 11 Mar 2013 Sascha Hauer committed on 12 Mar 2013
2013-03-11	4fa7483 Browse files » serial: clps711x: Migrate to using SYSCON driver ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Mar 2013 Sascha Hauer committed on 11 Mar 2013
	b38ac5c Browse files » ARM: clps711x: Export system-wide registers through SYSCON driver ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Mar 2013 Sascha Hauer committed on 11 Mar 2013
	e857ff5 Browse files » Add system controller register driver (SYSCON) ... This patch adds support for system controller register driver (SYSCON). Code taken from Linux Kernel and adapted for using in barebox. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Mar 2013 Sascha Hauer committed on 11 Mar 2013
	5fdba0f Browse files » ARM: clps711x: Add GPIO driver ... This patch adds support for CLPS711X GPIOs. Driver based on generic GPIO driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Mar 2013 Sascha Hauer committed on 11 Mar 2013
	100c016 Browse files » Add Generic GPIO driver ... This patch adds generic memory-mapped GPIO controller support. Code taken from Linux Kernel and adopted for barebox. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Mar 2013 Sascha Hauer committed on 11 Mar 2013
	9d9375e Browse files » ARM: clps711x: Add clocksource driver ... This patch adds clocksource driver for CLPS711X targets and adds support to platform to use this new driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Mar 2013 Sascha Hauer committed on 11 Mar 2013
2013-03-10	e42522f Browse files » MMC i.MX: remove unnecessary mach include ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Mar 2013
2013-03-10	9eefa74 Browse files » include asm/sections.h instead of asm-generic/sections.h ... To let the architectures override asm-generic/sections.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Mar 2013
2013-03-09	545453d Browse files » mtd: nand: Add command to generate a flash BBT ... With 2k NAND flashes the data layout in memory is not what is written on the flash device. This leads to the result that the factory provided bad block markers are not recognized correctly. To preserve the factory bad block information the i.MX NAND driver will not scan for the bad blocks itself when there is no flash based bbt available, because the mtd layer would do so based on wrong information. Instead, a new command is introduced which allows to manually create a flash bbt based on the correct information. As this command is tightly coupled to mtd and the i.MX NAND driver the command is placed under drivers/mtd/nand/ instead of commands/ where a command normally belongs to. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2013
	c3ccb2c Browse files » mtd: nand: Add bbt parameter ... The information which kind of bbt (if any) is used is hidden somewhere in the NAND layer. Expose it to a device parameter to make it detectable and visible during runtime. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2013
	e9e5919 Browse files » net: fec: use standard phy type defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2013
	31865e8 Browse files » net: fec: drop sevenwire support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Mar 2013
	1e0787a Browse files » net/phy: convert to pr_info ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 8 Mar 2013 Sascha Hauer committed on 9 Mar 2013
2013-03-08	e193326 Browse files » ata: ahci: refactor init functions ... Fold ahci_host_init and __ahci_host_init into ahci_add_host Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Mar 2013