scripts: add kwboot tool ...

This tool is used with Marvell EBU SoC to trigger the UART boot mode
provided by the SoC BootROM, and push the bootloader image to the
target using the Xmodem protocol.

It has been taken from the U-Boot source code, with minor
modifications to make it work with Armada 370/XP platforms.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: new kwbimage manipulation tool for Marvell SoC boot images ...

The Marvell EBU SoCs (Kirkwood, Armada 370, Armada XP) have a BootROM
that understand a specific image format, composed of a main header,
several extension headers and a paylod. This image can be booted from
NAND, SPI, SATA, UART, NOR, etc.

This patch adds a tool that allows to extract the components and
configuration of existing images, and to create new images.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: zynq: add zynq fsbl checksum script ...

The bootrom only reads an image if the correct checksum is present in the
header. The calculation is pretty simple:
sum over all words from 0x20 to 0x44
Two of this words are the image length. That is why the checksum can not be
calculated until barebox_image_size is known.
The easiest solution is a program that has to be run after make.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap4: add support for booting cpu from usb ...

Signed-off-by: Vicente <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts: add tool to create image for SPI boot on AM35xx ...

Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:

- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian

The mk-am35xx-spi-image tool converts barebox.bin to
this format.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

scripts/mkublheader: add program to produce an UBL image header ...

This image header is used for booting from SPI using the TI User
Boot Loader (UBL).

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

script: update git ignore file ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rename U-Boot-v2 project to barebox ...

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

update .gitignore files

add mkimage to .gitignore

add .gitignore files