LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2014-11-07	7675ec5 Browse files » arm: imx53-qsrb: fix initcalls on START-R board ... The compatible changed when we switched to the upstream DTs, so the initcalls would not be executed on the START-R board. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 5 Nov 2014 Sascha Hauer committed on 7 Nov 2014
2014-07-22	b8fa109 Browse files » arch/arm/lib/bootm: fix length check of kernel image ... Signed-off-by: Sebastian Block <basti@linux-source.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> basti@linux-source.de authored on 21 Jul 2014 Sascha Hauer committed on 22 Jul 2014
2014-07-09	950c75d Browse files » ARM: bootm: fix default uImage placement ... For small systems we would put the zImage at 32KiB after the start of memory, and put the DT a bit after the uImage. The kernel will always try to relocate itself and overwrite the DT. Try to be more clever at uImage placement to avoid triggering the kernel relocation. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 9 Jul 2014
2014-07-09	6a1606c Browse files » ARM: bootm: be more clever while deciding where to put zImage ... For small systems we would put the zImage at 8MiB after the start of memory, and put the DT a bit after the zImage. When we encounter an image which is bigger than 8MiB uncompressed, the kernel would try to relocate itself and overwrite the DT. Try to be more clever at zImage placement to avoid triggering the kernel relocation. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 May 2014 Sascha Hauer committed on 9 Jul 2014
2014-04-30	159f1ea Browse files » ARM: boards: Makefile: fix whitespace ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 29 Apr 2014 Sascha Hauer committed on 30 Apr 2014
2014-04-23	9c63e92 Browse files » treewide: fix signedness mixups in printf format specifiers ... This most likely doesn't fix any real bugs, but it's the right thing to do and reduces the noise level with static checkers. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 21 Apr 2014 Sascha Hauer committed on 23 Apr 2014
2014-04-23	86afb22 Browse files » ARM: at91: add missing break ... Otherwise SAM A5d35 would be detected as A5d36. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 21 Apr 2014 Sascha Hauer committed on 23 Apr 2014
2014-04-08	feffac4 Browse files » ARM: dts: edmqmx6: add SPI SCLK pinmux ... Otherwise reading or writing to the SPI flash doesn't work. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 7 Apr 2014 Sascha Hauer committed on 8 Apr 2014
2014-04-04	0a5529d Browse files » Merge branch 'for-next/ppc' Sascha Hauer committed on 4 Apr 2014
	245bc10 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 4 Apr 2014
	3753efa Browse files » Merge branch 'for-next/imx-phyflex' ... Conflicts: arch/arm/boards/phytec-phyflex-imx6/board.c Sascha Hauer committed on 4 Apr 2014
	4997646 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 4 Apr 2014
	712b555 Browse files » Merge branch 'for-next/davinci' Sascha Hauer committed on 4 Apr 2014
	b587c87 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 4 Apr 2014
	74b5a3d Browse files » Merge branch 'for-next/imx-ipu-v3' Sascha Hauer committed on 4 Apr 2014
	279fb43 Browse files » ARM: Phytec phyCORE i.MX35: Update defconfig ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
	effb814 Browse files » ARM: i.MX53 QSB: Remove wrong return ... For a version 1.0 board the rest of loco_late_init should be executed to completely configure the board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 4 Apr 2014
2014-04-03	d70c5a3 Browse files » ARM: i.MX6 Sabrelite: Fix ethernet ... The board code does a phy reset. This implicitly requests the phy reset gpio. This gpio is also registered in the devicetree as phy reset gpio, so the fec driver probe can't request the gpio and bails out with -EBUSY. Fix this by freeing the phy reset gpio in the board code. While at it use gpio_request_array for the gpios. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
	10385d7 Browse files » ARM: i.MX6 Phytec phyFLEX: Add Nand update support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
	964966b Browse files » ARM: i.MX6: Add Nand boot bbu handler ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
	93f1811 Browse files » MIPS: qemu-malta: add CBUS UART support ... This patch adds CBUS UART dts support; also it adds the necessary macros for DEBUG_LL. qemu-malta supports three serial interfaces: * two ports are provided by the FDC37M817 Super I/O; this chip is connected via LPC bus to Intel 82371EB (PIIX4E) South Bridge; * the third serial port is provided by the discrete TI 16C550C (CBUS UART); this chip is connected via CBUS directly to the board's GT64120 North Bridge. See Malta User's Manual (MD00048) for details. CBUS UART Instructions for use: 1. Enable CONFIG_CONSOLE_ACTIVATE_ALL in .config (or disable uart0 in dts) and compile barebox; 2. run qemu: qemu-system-mips -nographic -nodefaults \ -monitor null -M malta -m 256 \ -serial null -serial null -serial stdio \ -bios barebox-flash-image Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 2 Apr 2014 Sascha Hauer committed on 3 Apr 2014
	3e445eb Browse files » ppc: P2020RDB: add environment partition support ... Add an environment partition and support commands so that the system configuration can be permanent. Signed-off-by: Renaud Barbier <renaud.barbier@ge.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Renaud Barbier authored on 2 Apr 2014 Sascha Hauer committed on 3 Apr 2014
2014-03-31	709a2e7 Browse files » ARM: Panda: Fix board selection in panda defconfig files ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Mar 2014
	0d82393 Browse files » ARM: at91: add sama5d36 SoC support ... SAMA5D36 SoC is a sub type of SAMA5D3 which has two Ethernets Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Bo Shen authored on 28 Mar 2014 Sascha Hauer committed on 31 Mar 2014
	b51cba9 Browse files » MIPS: rzx50: use short form for serial1 reference ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 28 Mar 2014 Sascha Hauer committed on 31 Mar 2014
2014-03-29	d9173ef Browse files » ARM: update imx_v7_defconfig ... - Enable loadenv command - Enable mtd/NAND/UBI/UBIFS support - Enable IPUv3 support - Enable splash support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	09821fb Browse files » ARM i.MX6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority ... This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity. Some boards like the SabreLite and SabreSD seem to set this in the DCD already, but the documented register reset values do not contain the necessary settings. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
	3868765 Browse files » video: Add display timing from devicetree helper ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Mar 2014
2014-03-28	ce6755c Browse files » ARM: i.MX6: Add video clocks ... This adds the IPU, LVDS and HDMI clocks. As these are many, depend on the IPU driver being compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Mar 2014
2014-03-28	6d610de Browse files » ARM: i.MX: introduce clk parent rate changes ... Let dividers and gates change the parent rates. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Mar 2014