drop CONFIG_PARTITION_NEED_MTD ...

With CONFIG_PARTITION_NEED_MTD enabled we use mtd rather than devfs
directly to create partitions on mtd devices. Since:

| commit b32cd8d
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Wed Apr 9 15:49:32 2014 +0200
|
|     mtd: nand: bb: use mtd api directly
|
|     The devfs layer just adds an addition indirection between mtd
|     and the bb devices with no purpose. Drop it.
|
|     Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The bad block aware device creation doesn't work if this option
is disabled. With this we remove CONFIG_PARTITION_NEED_MTD and always
use mtd partitions on mtd devices.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: iterate over directories in alphabetical order ...

When iterating over directories in order to find boot scripts do
this alphabetically to get a predictable order. This can be done
with glob() rather than readdir().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot: fix multiple boot sources ...

When there are multiple bootsources barebox should try booting them
until one succeeds. This is broken because we bail out of the iteration
loop with a goto. Remove the goto to fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Fix the options and protocols used by the loadx command. ...

From 3cd9702 Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Thu, 8 May 2014 13:27:11 -0700
Subject: [PATCH] Fix the options and protocols used by the loadx command.

It seems like the loadx command was improperly copy/pasted from the loady
implementation, and was trying to load files using the ymodem protocol. This
patch should fix the command so that it uses xmodem, implements the -t option
and outputs the correct baudrate being used.

Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/regulator' ...

Conflicts:
	commands/Makefile

Merge branch 'for-next/misc'

Merge branch 'for-next/memtest'

Merge branch 'for-next/ioresource'

commands/umount: Return real error code if "umount" fail ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/mount: Return real error code if "mount" fail ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add initial regulator support ...

Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

env: erase/protect in envfs_save ...

So that the envfs_save is more useful outside of the saveenv command

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/usbserial: Remove unused variable ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2048: port to barebox ...

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: cleanup requests of regions ...

This patch removes the first and last entry check inside the loop.
There should be no functional changes there.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memtest: cleanup error handling ...

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: loady: fix Y-Modem/G option name in help message ...

Actually loady command uses '-g' option for Y-Modem/G mode
selection; see loady() function:

    while ((opt = getopt(argc, argv, "b:t:g")) > 0) {
        switch (opt) {
    ...
        case 'g':
            is_ymodemg = 1;
            break;

By mistake help message show '-y' option for Y-Modem/G mode
selection.

This patch fixes the problem.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: uimage: remove redundant error message ...

uimage_verify already prints an error message if the CRC
is wrong. Romove the never reached redundant message in
the caller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

treewide: fix signedness mixups in printf format specifiers ...

This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

loadenv: ignore -ENOENT when removing /env ...

With the -s option loadenv first removes /env. Ignore it when this
directory does not exist.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: Allow for I/O mapped I/O ...

Rework the current framework so that I/O mapped I/O resources are
also possible.

Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mtd'

Merge branch 'for-next/menutree'

Merge branch 'for-next/boot'

add menutree command ...

Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:

title -  A file containing the title of the entry as shown in the menu
box -    If present, the entry is a 'bool' entry. The file contains a variable
         name from which the current state of the bool is taken from and saved
         to.
action - if present this file contains a shell script which is executed when
         when the entry is selected.

If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

blspec: honor default/once entries again ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

led: trigger: Add missing LED_TRIGGER_DEFAULT_ON string ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot command: only create boot entries from scripts ...

When given a directory ignore all files that are not shell scripts.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

boot command: honour global.boot.default also for -l and -m ...

The boot command is expected to work on bootsources from the commandline
if given, on global.boot.default otherwise. Fix this behaviour for the
-m and -l options also.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: Fix for creating ubi volumes with 64bit size ...

Since MTD is already supports >= 4GB device sizes it is better to
allow ubi valumes also be created of larger sizes.

Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Grigory Milev <g.milev@sam-solutions.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>