LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / mach-imx / Kconfig

2014-05-10	4540f5e Browse files » ARM: i.MX: Phytec-phyCARD-i.MX27: Switch to multi-image support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 May 2014
2014-05-05	825fca3 Browse files » imx6: ocotp: Add On-Chip OTP registers write support ... FUSEs (OTP registers) can be written via /dev/imx-ocotp character device. For example, writing MAC 12:34:56:78:9A:BC can be performed as > mw -l -d /dev/imx-ocotp 0x8c 0x00001234 > mw -l -d /dev/imx-ocotp 0x88 0x56789ABC and reading as > md -l -s /dev/imx-ocotp 0x88+8 00000088: 56789ABC 00001234 , where 0x88 (0x224) and 0x8C (0x234) are offsets of MAC OTP registers. Notice: FUSEs are PROM, so "0" (unprogrammed) bits can be replaced with "1" (but not vice versa) only once. Also, for MAC there are convinient parameters: > ocotp0.permanent_write_enable=1 > ocotp0.mac_addr=12:34:56:78:9A:BC imx_ocotp 21bc000.ocotp: reloading shadow registers... imx_ocotp 21bc000.ocotp: reloading shadow registers... > echo $ocotp0.mac_addr 12:34:56:78:9A:BC Signed-off-by: Uladzimir Bely <u.bely@sam-solutions.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uladzimir Bely authored on 11 Apr 2014 Sascha Hauer committed on 5 May 2014
2014-04-30	3e571c1 Browse files » imx6: Add support for phyCARD-i.MX6 ... Add support for Phytec phyCARD-i.MX6. - 1GB RAM on two banks - 1GB RAM on one bank - 2GB RAM on two banks Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 30 Apr 2014 Sascha Hauer committed on 30 Apr 2014
2014-04-29	ccc4eac Browse files » RiOTboard: add new board ... this board is produced by Embest/Element 14 and is based on i.MX6 Solo The following features are tested : - UART2 (console) - eMMC - SDCard - uSDCard - Ethernet - USB Host (through 4 ports hub) - I2C 1/2/3 - 2 LEDs Boot on eMMC and through USB loader are tested. For more informations on this board : http://www.riotboard.org/ Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 24 Apr 2014 Sascha Hauer committed on 29 Apr 2014
2014-04-04	3753efa Browse files » Merge branch 'for-next/imx-phyflex' ... Conflicts: arch/arm/boards/phytec-phyflex-imx6/board.c Sascha Hauer committed on 4 Apr 2014
2014-04-04	4997646 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 4 Apr 2014
2014-04-03	964966b Browse files » ARM: i.MX6: Add Nand boot bbu handler ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Apr 2014
2014-03-28	b34eed0 Browse files » ARM: i.MX6: Add initial variscite VAR-SOM-MX6 CPU support ... The VAR-SOM-MX6 is a System on module from Variscite, see: http://www.variscite.com/products/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6 This adds support for this module on the VAR-MX6CustomBoard baseboard. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Mar 2014
2014-03-26	2863149 Browse files » ARM: pfla02: Add support for DualLite and Solo core ... Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Christian Hemp authored on 12 Mar 2014 Sascha Hauer committed on 26 Mar 2014
2014-03-07	9c2aa61 Browse files » Merge branch 'for-next/imx-image' ... Conflicts: arch/arm/dts/Makefile Sascha Hauer committed on 7 Mar 2014
2014-03-03	325d844 Browse files » ARM: i.MX31: Add support for mx31moboard board ... The mx31moboard is used on the marXbot, Eyebot and Footbot robot. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philippe Rétornaz authored on 28 Feb 2014 Sascha Hauer committed on 3 Mar 2014
2014-02-24	1ce7999 Browse files » ARM: i.MX6: Add Garz+Fricke Santaro board support ... Most devices relevant for barebox like sd/emmc/network/uarts work. Devicetree contains several undefined drive strength settings, these can be fixed once the kernel has sorted this out. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 24 Feb 2014
2014-02-24	1d8a49a Browse files » ARM: add minimal support for the Freescale Quad UDOO Board ... Adding minimal support for the UDOO board. For more information about the board: http://www.udoo.org/ Signed-off-by: Raphael Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Raphaël POGGI authored on 17 Feb 2014 Sascha Hauer committed on 24 Feb 2014
2014-02-19	d7db7df Browse files » ARM: i.MX6: sabresd: switch to multi-image ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 17 Feb 2014 Sascha Hauer committed on 19 Feb 2014
2014-02-03	c224cd3 Browse files » Merge branch 'for-next/imx' ... Conflicts: arch/arm/boards/dmo-mx6-realq7/lowlevel.c Sascha Hauer committed on 3 Feb 2014
2014-02-01	021890a Browse files » ARM: i.MX: Karo TX25: Switch to multiboard support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2014
2014-01-31	0e80f5b Browse files » ARM: i.MX: cleanup bootmode selection ... Which bootmode is selected has no longer to be chosen by Kconfig. The boards can decide themselves which bootmode they want to support. This makes it unnecesary to ask the user which bootmode shall be supported, so the "Select boot mode" becomes invisible and both support will be compiled in as needed by the boards. NAND_IMX_BOOT goes away and the already existing ARCH_IMX_EXTERNAL_BOOT_NAND can now be used for the boards to depend on external nand boot. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Jan 2014
2014-01-29	2af8bdd Browse files » ARM: i.MX53: tqma53: Switch to devicetree and multiboard support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 29 Jan 2014
2014-01-23	00bd286 Browse files » ARM: phyCARD-i.MX27: switch to new environment ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Jan 2014
	6722198 Browse files » ARM: imx6: rename Carrier-1 to Hummingboard ... Solidrun has renamed the Carrier-1 to Hummingboard. This is also the name that is used in upstream Linux, change barebox to be in line with that. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Jan 2014 Sascha Hauer committed on 23 Jan 2014
	3c3e99d Browse files » ARM: imx6: add initial support for Nitrogen6X boards ... Only the 1GB variant is supported for now, as I don't have anything other to test with. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Jan 2014 Sascha Hauer committed on 23 Jan 2014
2013-12-06	e9ea6ee Browse files » Merge branch 'for-next/misc' ... Conflicts: scripts/Makefile Sascha Hauer committed on 6 Dec 2013
2013-12-03	f87af10 Browse files » ARM: i.MX6: add initial support for SolidRun Cubox-i Carrier-1 ... Tested to work: - MMC - USB - Ethernet Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 2 Dec 2013 Sascha Hauer committed on 3 Dec 2013
2013-11-25	f961069 Browse files » ARM: i.mx53: Support for Voipac board with X53-DMM-668 module. ... Device definitions is read from the devicetree description. The board support is using 'multiboard' approach. Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> create mode 100644 arch/arm/boards/freescale-mx53-vmx53/Makefile create mode 100644 arch/arm/boards/freescale-mx53-vmx53/board.c create mode 100644 arch/arm/boards/freescale-mx53-vmx53/env/config-board create mode 100644 arch/arm/boards/freescale-mx53-vmx53/flash-header-imx53-vmx53.imxcfg create mode 100644 arch/arm/boards/freescale-mx53-vmx53/lowlevel.c create mode 100644 arch/arm/dts/imx53-voipac-bsb.dts create mode 100644 arch/arm/dts/imx53-voipac-dmm-668.dtsi Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Rostislav Lisovy authored on 20 Nov 2013 Sascha Hauer committed on 25 Nov 2013
2013-11-20	9f88876 Browse files » ARM i.MX6: sabrelite: switch to multi image support ... The image will be named after the official name of this board: barebox-freescale-mx6-sabreline.img Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philipp Zabel authored on 18 Nov 2013 Sascha Hauer committed on 20 Nov 2013
2013-11-20	1c8608c Browse files » ARM i.MX6: sabrelite: switch to multiboard support ... Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Philipp Zabel authored on 18 Nov 2013 Sascha Hauer committed on 20 Nov 2013
2013-11-13	c8daebd Browse files » ARM: i.MX boards: Remove duplicate dependency of ARCH_IMX21 for IMX_IIM ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Nov 2013 Sascha Hauer committed on 13 Nov 2013
2013-11-13	564f15d Browse files » ARM: i.MX boards: Remove useless select ... Symbols HAVE_DEFAULT_ENVIRONMENT_NEW & HAVE_PBL_MULTI_IMAGES are already selected by IMX_MULTI_BOARDS. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 11 Nov 2013 Sascha Hauer committed on 13 Nov 2013
2013-11-11	7a1e15b Browse files » Cleanup Kconfig files ... This patch provides a global cleanup barebox Kconfig files. This includes replacing spaces to tabs, formatting in accordance format. No functional changes. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 8 Nov 2013 Sascha Hauer committed on 11 Nov 2013
2013-09-05	1729b17 Browse files » Merge branch 'for-next/boardinfo' ... Conflicts: arch/mips/boards/qemu-malta/init.c commands/bootm.c drivers/of/base.c Sascha Hauer committed on 5 Sep 2013