menutree: let it select GLOB and GLOB_SORT ...

The menutree doesn't select CONFIG_GLOB, but it depends on it. Without
it will just hang. So let it select it automatically. Also remove the
dependency of CONFIG_GLOB on CONFIG_HUSH, because glob() will run with
the simple shell as well.

Also let CONFIG_MENUTREE select on CONFIG_GLOB_SORT. While is not
strictly needed, many people use menu/00-foo menu/10-bar menu/20-barf
to sort their menu entries. So select it out of convenience.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: move CONFIG_LONGHELP to commands/Kconfig ...

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: HUSH_GETOPT -> CMD_GETOPT ...

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: CMD_MEMORY -> COMPILE_MEMORY ...

* CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig
* that symbol turned not a command on, but just the compilation of
  commands/mem.c, so rename it accordingly

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defenv-2: replace menu with menutree ...

This makes the menu easier to extend and to maintain.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add menutree command ...

Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:

title -  A file containing the title of the entry as shown in the menu
box -    If present, the entry is a 'bool' entry. The file contains a variable
         name from which the current state of the bool is taken from and saved
         to.
action - if present this file contains a shell script which is executed when
         when the entry is selected.

If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv-2: Fix menu files selection ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/nfs' ...

Conflicts:
	defaultenv/defaultenv-2-base/bin/ifup

Merge branch 'for-next/misc' ...

Conflicts:
	common/environment.c

net: Add ifup support ...

The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: Add boot option for DFU ...

DFU is for device firmware upgrade, but for development purposes it's
sometmes useful to just start a kernel vie DFU. This adds a boot option
for doing this and also the corresponding counterpart on the host. With
this it's possible to boot a system with:

scripts/dfuboot.sh -k linuximage -d dtb -c "root=ubi0:root ubi.mtd=ubi rootfstype=ubifs ignore_loglevel"

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: Allow multiple defaultenvironment overlays ...

We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Kconfig: Select default compression type ...

Instead of asking explicitly for the default environment compression
type ask for the in-barebox default compression type. This also adds
a DEFAULT_COMPRESSION_SUFFIX make variable which can be used together
with the wildcard rules for compressed files to generate compressed
files without explicitly support each compression type.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Load PBL into SRAM ...

This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.

Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment: Fix wrong Kconfig dependency ...

DEFAULT_ENVIRONMENT needs ENV_HANDLING, not CMD_LOADENV.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/omap-devicetree-prepare'

Merge branch 'for-next/misc' ...

Conflicts:
	scripts/Makefile

scripts: bareboxcrc32 as host and target userspacetool ...

This patch adds the crc32 command to be build
as host and optionally as target tool.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common Kconfig: disable unused options for SHELL_NONE ...

Let commandline editing and long help depend on !SHELL_NONE.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common Kconfig: Add missing depends on ...

CONFIG_MAXARGS is only used with the simple console support, so add
a 'depends on'. While at it, move it below the shell selection.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: OMAP: Make debug_ll UART Kconfig selectable ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

common: add dependency !SANDBOX on target tools ...

The build of target tools fails on sandbox architecture.
We don't need any target tools in this case, so add a dependency.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add kernel-install tool for bootloader Spec ...

This adds a tool for installing kernels according to the bootloader
spec. systemd already has a similar tool, but it is limited to installing
kernels on the currently running system. The barebox kernel-install
tool instead can also be used to install kernels on removable media on a
development host for cross development. It is compiled in two variants,
as 'kernel-install' for the host and as 'kernel-install-target' using
$CROSS_COMPILE.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Implement bootloader spec support for barebox ...

The Bootloader Specification describes a way how kernels can
be installed on devices and how they can be started by the bootloader.

The bootloader spec is currently supported by (x86) gummiboot and
by systemd which provides a kernel-install script. With the bootloader
spec it's possible for the Operating system to install a new kernel
without knowing about the bootloader and for the bootloader it's possible
to discover and start Operating Systems on a media without being
configured.

For more details about the spec see:

http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec/

This patch adds barebox support for the spec. It enhances the 'boot'
command so that not only boot script names can be given, but also
devices containing bootloader spec entries. With this it's possible
to call the 'boot' command like: 'boot sd emmc net'. It would then
first look for bootloader spec entries on the (removable) sd card,
then, is nothing is found, on the internal emmc and if still
unsuccessful would call the 'net' bootscript.

The bootloader Spec currently doesn't specify which entry should be
default if multiple entries are found on a single device. Therefore
barebox currently has two extensions of the spec. The $BOOT diretory
can contain a file named 'default'. If present, the content of the
file is treated as a filename under $BOOT/loader/entries/ which is
used as default. Similarly if a file named 'once' is present, the
entry is started once and the file is removed afterwards. This is
useful for testing if a newly installed kernel works before making
it the default.

As on ARM and other Architectures a devicetree has to be specified
for the kernel, the 'devicetree' property is used to specify a
devicetree. Like 'kernel' and 'initrd' this also contains a pth
relative to $BOOT.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/login' ...

Conflicts:
	include/console.h

defenv-2: replace boot script with command ...

This replaces the 'boot' script in the defaultenv-2 with a command
with the same behaviour. A command gives more flexibility for future
externsions

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm needs uImage support. Select it ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce runtime loglevel ...

With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

login/passwd: add default password support ...

even if the env is broken you will have a password

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove remaining references of CONFIG_BOARDINFO ...

With this all code uses barebox_get_model() and no longer
a compile time generated string.

Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>