LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2015-02-25	13bc8b7 Browse files » ARM Samsung: fix booting from NAND without pbl ... This was broken in 558d72dc5116 (ARM Samsung: fix booting from NAND with pbl). '_text' is TEXT_BASE when building without pbl and (TEXT_BASE - SZ_2M) when building with pbl, so this works in both cases. Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Conflicts: arch/arm/mach-samsung/lowlevel-s3c24x0.S Michael Olbrich authored on 24 Feb 2015 Sascha Hauer committed on 25 Feb 2015
2015-01-06	79593a8 Browse files » arm: at91: fix ecc_mode on non atmel boards ... since commit `54bccad` Author: Raphaël Poggi <poggi.raph@gmail.com> mtd: atmel_nand: retrieve ecc_mode from pdata break most of the non atmel AT91 boards that did not provide a ecc_mode params in the nand pdata Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Raphaël Poggi <poggi.raph@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 6 Jan 2015 Sascha Hauer committed on 6 Jan 2015
2015-01-06	bfbe59a Browse files » ARM: am335x bone: Fix Booting from eMMC ... Booting a beaglebone black from eMMC is broken since: commit `0d6392d` Author: Sascha Hauer <s.hauer@pengutronix.de> Date: Thu Jun 5 12:09:07 2014 +0200 ARM: AM335x: Beaglebone: Use stripped down devicetree for MLO The stripped down device tree does not have the eMMC device node which the beaglebone black needs for booting. Add this node to the common dts file, but keep it disabled. It gets enabled later with a call to am33xx_of_register_bootdevice() when the system is booted from eMMC. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Jan 2015
2014-11-07	1e8d21a Browse files » arm: imx53-qsrb: fix initcalls on START-R board ... The compatible changed when we switched to the upstream DTs, so the initcalls would not be executed on the START-R board. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 5 Nov 2014 Sascha Hauer committed on 7 Nov 2014
2014-10-27	31511e0 Browse files » mxs: iomux-imx28: Fix keeper/pullup/drive strength/voltage flags ... Double check all pin's BK, PE, SE and VE flags and correct wrong definitions using i.MX28 Applications Processor Reference Manual, Rev 2, 08/2013. Fixes: b1df39c28c7f (mxs: Add remaining i.MX28 iomux configurations) Fixes: e2cee7cb6790 (mxs: add support for mx28-evk) Fixes: 03e61e1bd967 (STM378x: Add i.MX28 architecture) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 23 Oct 2014 Sascha Hauer committed on 27 Oct 2014
2014-10-23	b07e7f3 Browse files » EFI: report correct block device size ... last_block is a zero-based block number, so the total number of blocks is last_block + 1 Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Olbrich authored on 22 Oct 2014 Sascha Hauer committed on 23 Oct 2014
2014-10-21	e0fd4cb Browse files » arm: at91: remove unused variable ... Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 20 Oct 2014 Sascha Hauer committed on 21 Oct 2014
2014-10-09	b6eea86 Browse files » arch/MPC5xxx: fix linker script for MPC5200 ... Without this change the barebox.bin ends up with: 00000000 79 ba 8f 79 00 00 00 00 75 39 6e d1 74 27 00 00 \|y..y....u9n.t'..\| 00000010 01 00 00 00 00 00 00 00 28 80 ad db 8d c7 a8 67 \|........(......g\| 00000020 4e 07 00 00 10 00 00 00 2f 63 6f 6e 66 69 67 00 \|N......./config.\| 00000030 8d c7 a8 68 ff 01 00 00 23 21 2f 62 69 6e 2f 73 \|...h....#!/bin/s\| 00000040 68 0a 0a 68 6f 73 74 6e 61 6d 65 3d 46 49 58 4d \|h..hostname=FIXM\| 00000050 45 0a 69 66 20 5b 20 2d 7a 20 22 24 75 73 65 72 \|E.if [ -z "$user\| 00000060 22 20 5d 3b 20 74 68 65 6e 0a 23 09 75 73 65 72 \|" ]; then.#.user\| 00000070 3d 0a 66 69 0a 0a 23 20 45 6e 74 65 72 20 4d 41 \|=.fi..# Enter MA\| [...] which means it starts with the default environment instead of the reset vector area. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 7 Oct 2014 Sascha Hauer committed on 9 Oct 2014
2014-10-02	fa93e4f Browse files » Merge branch 'for-next/resource-err-ptr' Sascha Hauer committed on 2 Oct 2014
	52a0feb Browse files » Merge branch 'for-next/phycore-imx6' Sascha Hauer committed on 2 Oct 2014
	6209c24 Browse files » Merge branch 'for-next/openrisc' Sascha Hauer committed on 2 Oct 2014
	5aa553e Browse files » Merge branch 'for-next/omap' Sascha Hauer committed on 2 Oct 2014
	a653340 Browse files » Merge branch 'for-next/musb' Sascha Hauer committed on 2 Oct 2014
	8c74662 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 2 Oct 2014
	08d8687 Browse files » Merge branch 'for-next/mips' Sascha Hauer committed on 2 Oct 2014
	0846940 Browse files » Merge branch 'for-next/marvell' Sascha Hauer committed on 2 Oct 2014
	2a2a8b9 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 2 Oct 2014
	d006449 Browse files » Merge branch 'for-next/firmware' Sascha Hauer committed on 2 Oct 2014
	61bf20d Browse files » Merge branch 'for-next/at91' Sascha Hauer committed on 2 Oct 2014
	6fe56fe Browse files » Merge branch 'for-next/arm' Sascha Hauer committed on 2 Oct 2014
	eacd955 Browse files » ARM: defconfig: remove board specific mvebu defconfigs ... The boards are now covered by mvebu_defconfig Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 2 Oct 2014
	2d069dc Browse files » ARM: Add mvebu_defconfig ... This adds a mvebu_defconfig which enables all mvebu based boards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Sascha Hauer committed on 2 Oct 2014
2014-09-30	36a744e Browse files » ARM: am335x: NAND MLO update: always let the user confirm updating ... Before actually doing something the user should always confirm the update. Move the question out of the if() block. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
	7141741 Browse files » ARM: am335x Phytec phyCORE: register SPI NOR and NAND update handlers ... Additionally to the MLO update handlers also register the update handlers for the regular barebox image. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
	33e35f2 Browse files » ARM: am335x: Add a NAND update handler for the regular barebox ... To be able to not only update the MLO in NAND but also the regular barebox image. Since this is implemented with help of the corresponding xload handler this also removes the 'xload' from the Kconfig options and the filename. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
	77b8c95 Browse files » ARM: am33xx update SPI NOR: Ask use before flashing ... Let the user confirm the update process before flashing the new image. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
	130d511 Browse files » ARM: am33xx update SPI NOR: Check image size before flashing ... Test if the image fits into the partition before flashing it. Makes the update process more safe. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 Sep 2014
2014-09-26	874d371 Browse files » ARM: am335x_defconfig: Enable USB support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	bd27156 Browse files » ARM: dts: Update am335x-bone-common.dtsi ... Update from current upstream dtsi. This enables the USB control module. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Sep 2014
	e1b1d0f Browse files » ARM: AM33xx: Enable USB and USB phy clocks ... These are necessary for USB support. To make sure they are actually enabled when a USB capable barebox is started call the clock enable function during startup also for the full barebox, not only the MLO. Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@delphi.com> Rolf Evers-Fischer authored on 5 May 2014 Sascha Hauer committed on 26 Sep 2014