Signed-off-by: 张忠山 <zzs0213@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Right now we do not support persistent names for mtd devices. The
base name can be passed to add_mtd_device, but this is always appended
with a dynamic number. With this patch add_mtd_device takes a device_id
argument which can be used to create a mtd device with an exact name.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:

- locks removed
- The splitting in different files we had to better support different
  features has been dropped. Instead this is now done mostly with the
  use of __maybe_unused

Some barebox adjustments are forward ported, like:

- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This introduces the ecc stength fields in the structures and fills
them in, but leaves them unused right now.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To sync with the Linux kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Chipsize didn't take number of LUNs into account. Sync chipsize calculation
to kernel commit 63795755
Tested with MT29F8G16ADBDAH4 on OMAP4

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

this fix the problems introduced when detecting non ONFI flashes in
commit 4c2bdc8
"nand_base: detect more ONFI flash"

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Conflicts:
	drivers/mci/mci-core.c

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

if the flash has a known type, the ONFI detection won't occur
and thus we may not detect the right parameters.
By testing both namd and pagesize, as done in the kernel, we
can detect ONFI flash with know IDs.

As an example on an i.MX53 board :
- without the patch :
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3
(Micron NAND 1GiB 3,3V 8-bit), page size: 4096, OOB size: 128

- with the patch :
ONFI flash detected ... ONFI param page 0 valid
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xd3
(Micron MT29F8G08ABACAWP), page size: 4096, OOB size: 224

in the first case the OOB size is wrong.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The information which kind of bbt (if any) is used is hidden somewhere
in the NAND layer. Expose it to a device parameter to make it detectable
and visible during runtime.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

While erasing bad blocks is a potentially dangerous operation
it is sometimes needed during development or when some foreign
code has touched the flash.

This patch adds a device parameter 'erasebad' to allow erasing
bad blocks. Since this is not wanted during production this is
behind a Kconfig option.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This allows us to have some NAND specific stuff during registration,
like for example adding NAND specific device parameters.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Some of the newer MLC devices have a 6-byte ID sequence in which
several field definitions differ from older chips in a manner that is
not backward compatible.

This method is already used in the Linux Kernel.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This introduces a new NAND_BUSWIDTH_AUTO flag which can be used
to automatically detect the nand buswidth. The id is always read
in 8bit mode. An additional callback is needed to switch the nand
controller into 16bit mode.
This currently depends on a safe read_byte (always) and read_buf
(for onfi-only flashes) callback. It has been tested on OMAP, but
is not something that generally works. For this reason the existence
of the set_buswidth callback is used to determine whether we are
able to do autodetection or not.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

the code is taken from linux & u-boot implementations
Validated on an i.MX53 which gives the following log :
ONFI flash detected ... ONFI param page 0 valid
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), page size: 4096, OOB size: 224

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Change NAND_WRITE into MTD_WRITE.
Change "page_shift" references in the core, which are purely
NAND, into mtd->writesize which is MTD generic.
Rename all "info" (struct mtd_info) into "mtd".

Also provide a parameter to add_mtd_device() so that legacy
nand devices still appear as nand<N>.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

- use KERN_ERR for messages when NAND-ID detection fails
- report the IDs also if not found
- print the errno if nand_scan failed

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

The nand oob functions occupy quite some binary space. If not needed,
we can save this space by making this configurable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

In order to make it optional later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

In order to make it optional later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

in order to make it optional later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>