Merge branch 'for-next/resource-err-ptr'

Merge branch 'for-next/phycore-imx6'

Merge branch 'for-next/openrisc'

Merge branch 'for-next/net-phy'

Merge branch 'for-next/misc'

Merge branch 'for-next/imx'

Merge branch 'for-next/at91'

net: macb: enable GEM with only FE feature ...

If the GEM is used, however only FE featuren enabled, then it can not
support FBLDO configured as 16, and no RGMII/GMII configuratin bit.

So, in order to support GEM only with FE feature enabled, we do:
  - using default value for FBLDO.
  - using same bit for RMII/MII configuration as GEM for RGMII/GMII.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: asix: handle packets crossing URB boundaries ...

ASIX AX88772B started to pack data even more tightly. Packets and the ASIX packet
header may now cross URB boundaries. To handle this we have to introduce
some state between individual calls to asix_rx_fixup().

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ Rolf: ported from kernel to barebox 2014.09.0 ]
Signed-off-by: Rolf Evers-Fischer <embedded24@evers-fischer.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: don't use 'dev' as name for variables of type struct phy_device ...

Using 'dev' as name for variables which are not of type
struct device(_d) is bad habit and leads to confusions. Use phydev
instead.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Use xzalloc for small allocations ...

No need to call kzalloc for small allocations, xzalloc will do without
the need for an additional check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: introduce phy_aneg_done ...

phy_wait_aneg_done() is directly called by the network code, so it
should not read phy registers directly. Introduce phy_aneg_done to
give phy drivers the chance to do something different to poll for
autonegotiation completion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy: marvell: move IDs to own header ...

So they can be used in board files to register
fixups.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

phy/micrel: disable Asym_Pause support ...

With SUPPORTED_Asym_Pause enabled we need to hotplug the ethernet cable.
So disable it like done with PHY_ID_KSZ9021.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_get_mem_region return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

net: dm9k: fix copy-paste typo ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: ethoc: add device tree support ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/net'

Merge branch 'for-next/misc' ...

Conflicts:
	lib/Makefile

net: phy: mdio-mvebu: Make the clock property required ...

This property is wrongly documented as 'optional', although all the
ethernet units need a clock to be enabled in order to access the MDIO
interface. For that reason, this commit makes the property a required
one and fails to probe the device, when a clock is not properly provided.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Add fallbacks for the obsoletes phy DT properties ...

In addition to the standard 'phy-handle' devicetree property, the binding
specifies two properties, which are considered obsolete: 'phy' and 'phy-device'.
This commit adds support for them in of_mdio_find_phy().

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gianfar: descriptors access with I/O accessors ...

As in U-Boot git-9c9141f, make read/write access to the TX/RX
descriptors CPU agnostic.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: allow "make ARCH=sandbox allyesconfig" ...

Compiling the tree with allyesconfig is helpful because different
compilers (gcc, clang) or static checkers (e.g. clang's scan-build)
can then process and check more code.

This patch introduces two new configuration symbols that Kconfig files
can depend on. That way, code that is only working where a cache or DMA
implementation exists can be opted out.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: Use descriptors from ch9.h ...

Use the descriptors from ch9.h instead of duplicating them
in usb.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: introduce usb_interface/usb_configuration structs ...

Currently we have two conflicting definitions of struct usb_config_descriptor
and struct usb_interface_descriptor in the tree. This is because the USB code
uses additional fields in the structs for internal housekeeping. Add
struct usb_interface and struct struct usb_configuration with the housekeeping
data and embed the corresponding hardware structs into them. This frees the
way to use the definitions from ch9.h in the next step.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: Kconfig: introduce USB_HOST symbol ...

This renames USB to USB_HOST since this is what the symbol really
means. Introduce a USB symbol which is selected by both USB_GADGET
and USB_HOST. This gives us a symbol to let common USB code depend
on.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: Add EFI Simple Network Protocol Driver ...

This adds a network driver which uses the EFI Simple Network
Protocol to implement networking for barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/net'