treewide: Fix typo collumn -> column ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx'

imx6: clk: Gate off ENFC clock before setting clock rate ...

This fixes NAND initialization issue which appears occasionally on
some i.MX6 SoCs (particulary was observed on phyCARD-i.MX6 with
i.MX6Solo).

Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: ubi: get_bad_peb_limit from mtd master ...

Like mentioned in the coment we need the size of the entire flash chip.
Check if a master exists and take his size.

Otherwise the limit will be too small and kernel prints:
UBI warning: print_rsvd_warning: cannot reserve enough PEBs for \
bad PEB handling, reserved 19, need 20

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand_orion: remove unused goto label ...

This fixes the following warning:

	drivers/mtd/nand/nand_orion.c: In function ‘orion_nand_probe’:
	drivers/mtd/nand/nand_orion.c:145:1: warning: label ‘no_res’ defined but not used [-Wunused-label]

Fixes: 1a215f5 ("nand: Add Marvell Orion NAND driver")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubi'

Merge branch 'for-next/resource-err-ptr'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Subject: [PATCH] cfi: print size in human readable format ...

The CFI size is now printed in a human readable format.
It also adds "0x" prefix to the printed address.

Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand: atmel: runtime to generate galois table ...

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region_by_name return an error pointer ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

UBI: bugfix in ubi_wl_flush() ...

Use the _safe variant because we're iterating over a list where items get
deleted and freed.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: init_volumes: Ignore volumes with no LEBs ...

UBI assumes that ubi_attach_info will only contain ubi_ainf_volume
structures for volumes with at least one LEB.
In scanning mode this is true because UBI can nicely create a ubi_ainf_volume
on demand while creating the EBA table.

For fastmap this is not true, the fastmap on-flash structure has a list of
all volumes, the ubi_ainf_volume structures are created from this list.
So it can happen that an empty volume ends up in init_volumes().

We can easely deal with that by looking into ->leb_count too.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fastmap: do not miss bit-flips ...

The return value from 'ubi_io_read_ec_hdr()' was stored in 'err', not in 'ret'.
This fix makes sure Fastmap-enabled UBI does not miss bit-flip while reading EC
headers, events and scrubs the affected PEBs.

This issue was reported by Coverity Scan.

Artem: improved the commit message.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fix the volumes tree sorting criteria ...

Commig "604b592 UBI: fix rb_tree node comparison in add_map"
broke fastmap backward compatibility and older fastmap images
cannot be mounted anymore. The reason is that it changes the
volumes RB-tree sorting criteria. This patch fixes the problem.

Artem: re-write the commit message

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fix rb_tree node comparison in add_map ...

The comparisons used in add_vol() shouldn't be identical.  Pretty sure
the following is correct but it is completely untested.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fix ubi free PEBs count calculation ...

The ubi->free_count should be updated with every insert/remove to/from
the ubi->free list.

Signed-off-by: Tanya Brokhman <tlinder@codeaurora.org>
Reviewed-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fix error path in __wl_get_peb ...

In case of an error (if there are not free PEB's for example),
__wl_get_peb will return a negative value. In order to prevent access
violation we need to test the returned value prior to using it later on.

Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Reviewed-by: Dolev Raviv <draviv@codeaurora.org>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fix some use after free bugs ...

Move the kmem_cache_free() calls down a couple lines.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: avoid program operation on NOR flash after erasure interrupted ...

nor_erase_prepare() will be called before erase a NOR flash, it will program '0'
into a block to mark this block. But program data into a erasure interrupted block
can cause program timtout(several minutes at most) error, could impact other
operation on NOR flash. So UBIFS can read this block first to avoid unneeded
program operation.

This patch try to put read operation at head of write operation in
nor_erase_prepare(), read out the data.
If the data is already corrupt, then no need to program any data into this block,
just go to erase this block.

This patch is validated on Micron NOR flash, part number is：JS28F512M29EWHA

Signed-off-by: Qi Wang <qiwang@micron.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI: fix error return code ...

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Richard Weinberger <richard@nod.at>

mtd: add mtdram device (which build mtd over ram area - useful for FRAM oder MRAM) ...

Change since v1 (Sascha, thanks for review):
	* use xzalloc instead of kzalloc and control check
	* correct help and names
	* fix coding style issue
	* remove verbose and unneeded messages

This adds support for MTD in RAM devices (like FRAM or MRAM).

Signed-off-by: Sebastian Block <basti@linux-source.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand: orion: Limit to Kirkwood platform ...

This driver is only available on Kirkwood SoCs, so add proper dependency.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/marvell'

mtd: atmel_nand: add support for device tree ...

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: retrieve ecc_mode from pdata ...

By retrieving the ecc_mode from pdata we can use the same code for device tree and
non device tree probing. Which was not possible before, because ecc_mode was arbitrarily set to
NAND_ECC_SOFT.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: add has_pmecc member ...

By adding this structure member, we can retrieve the pmecc config, through the device tree.

Signed-off-by: Raphaël Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand: Add Marvell Orion NAND driver ...

This commit adds NAND support for the controller present in Kirkwood SoCs.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>