LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2014-11-26	5496137 Browse files » imx6: clk: Gate off ENFC clock before setting clock rate ... This fixes NAND initialization issue which appears occasionally on some i.MX6 SoCs (particulary was observed on phyCARD-i.MX6 with i.MX6Solo). Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Dmitry Lavnikevich authored on 21 Nov 2014 Sascha Hauer committed on 26 Nov 2014
2014-11-24	2d22fca Browse files » usb: gadget: fastboot: select BANNER ... Fastboot gadget needs the 'release_string' which is available only if CONFIG_BANNER is set. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
	557b403 Browse files » mci: esdhc: add back PIO_TIMEOUT ... This got lost during bd1bf53b34c (mci: imx-esdhc: factor out common sdhci registers). Seems the PIO option isn't too heavily used. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
	0d18871 Browse files » video: ipuv3: select OFDEVICE for HDMI and LVDS ... Both components need the OF display timings helpers. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
	0233462 Browse files » firmware: altera-serial: fix printf message ... Fixes: .../altera_serial.c:118:2: warning: too many arguments for format Also sz is of type size_t, so use proper format specifier. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
	b7782cc Browse files » firmware: altera-serial: don't try to check void return value ... Fixes: .../altera_serial.c:84:6: error: void value not ignored as it ought to be Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
	7376942 Browse files » firmware: altera-serial: depend on SPI ... This driver uses SPI bus functions. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
	b525454 Browse files » firmware: socfpga: depend on ARCH_SOCFPGA ... This driver uses a lot of arch specific functionality and fails to build on anything but SOCFPGA. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 24 Nov 2014 Sascha Hauer committed on 24 Nov 2014
2014-11-20	c267e2d Browse files » mtd: ubi: get_bad_peb_limit from mtd master ... Like mentioned in the coment we need the size of the entire flash chip. Check if a master exists and take his size. Otherwise the limit will be too small and kernel prints: UBI warning: print_rsvd_warning: cannot reserve enough PEBs for \ bad PEB handling, reserved 19, need 20 Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 19 Nov 2014 Sascha Hauer committed on 20 Nov 2014
2014-11-20	78f2099 Browse files » dt: factor out common code ... Currently, dt_struct is always checked with the same code after dt_struct_advance(). Move the check after the switch statement. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 19 Nov 2014 Sascha Hauer committed on 20 Nov 2014
2014-11-17	16018ed Browse files » pci: tegra: relax link-up timeout ... Some devices need a considerable amount of time from reset deassertion until they are ready to establish a link. Relaxing the link-up timeout helps to detect them more reliable. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Nov 2014 Sascha Hauer committed on 17 Nov 2014
	81e3bac Browse files » pci: align bridge windows ... The bridge filtering logic needs a minimum alignment of 1MB for mem and 4KB for io resources. Take this into account while assigning resources to devices in oredr to not produce overlapping windows between different bridges. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Nov 2014 Sascha Hauer committed on 17 Nov 2014
	cc90265 Browse files » pci: correct BAR size calculation ... The previous math would return negative sizes for some BARs. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Nov 2014 Sascha Hauer committed on 17 Nov 2014
2014-11-11	c3f5ff5 Browse files » net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller ... This patch introduces the mvneta driver to support the network controller found in Armada 370/XP SoCs. Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 10 Nov 2014 Sascha Hauer committed on 11 Nov 2014
	2caa4bb Browse files » net: phy: Support Marvell 88EE1543 PHY ... This commit adds support for Marvell's 88E1543 PHY chip. This chip is almost identical to the 88EE1545, except the 88E1545 supports QSGMII and the 88EE1543 supports SGMII. Therefore, the same configuration function is used for both PHYs. For now, the only initialization provided for the 88EE1543 is the LED setup. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 10 Nov 2014 Sascha Hauer committed on 11 Nov 2014
	9a026a2 Browse files » net: phy: Support Marvell 88EE1545 PHY ... This commit adds support for Marvell's 88E1545 PHY chip. In particular, this allows to support QSGMII interfaces. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 10 Nov 2014 Sascha Hauer committed on 11 Nov 2014
	d273100 Browse files » net: phy: marvell: Fix array identation ... Just a cosmetic clean-up to fix the indentation of the entries in the phys array. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ezequiel Garcia authored on 10 Nov 2014 Sascha Hauer committed on 11 Nov 2014
2014-11-10	9a4cb25 Browse files » treewide: Reuse init_clock() return value for clocksource drivers ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 30 Oct 2014 Sascha Hauer committed on 10 Nov 2014
	edbd3a6 Browse files » pci: mvebu: Fix uninitialized variable in mvebu_get_target_attr() ... This is the same fix that was applied to the Linux kernel in commit 56fab6e18944 (PCI: mvebu: Fix uninitialized variable in mvebu_get_tgt_attr()). Fixes: 5a9ba98 ("pci: mvebu: Add PCIe driver") Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Thomas Petazzoni authored on 9 Nov 2014 Sascha Hauer committed on 10 Nov 2014
	42bc1ac Browse files » mtd: nand_orion: remove unused goto label ... This fixes the following warning: drivers/mtd/nand/nand_orion.c: In function ‘orion_nand_probe’: drivers/mtd/nand/nand_orion.c:145:1: warning: label ‘no_res’ defined but not used [-Wunused-label] Fixes: 1a215f5 ("nand: Add Marvell Orion NAND driver") Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 9 Nov 2014 Sascha Hauer committed on 10 Nov 2014
2014-11-07	ea5abfb Browse files » of: use OFTREE_MEM_GENERIC for the sandbox ... Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Luebbe authored on 6 Nov 2014 Sascha Hauer committed on 7 Nov 2014
2014-11-05	7b4cc54 Browse files » Merge branch 'for-next/tegra' Sascha Hauer committed on 5 Nov 2014
	e3c49aa Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 5 Nov 2014
	68d2850 Browse files » Merge branch 'for-next/led' Sascha Hauer committed on 5 Nov 2014
	18ded42 Browse files » Merge branch 'for-next/am335x' Sascha Hauer committed on 5 Nov 2014
2014-11-04	c202b7c Browse files » clk: tegra: don't enable UART clocks by default ... Now that we are registering a proper driver for the UARTs we no longer need to enable the clocks unconditionally. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Nov 2014 Sascha Hauer committed on 4 Nov 2014
	b5ac88e Browse files » serial: ns16550: add Tegra support ... Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Nov 2014 Sascha Hauer committed on 4 Nov 2014
	2c779cb Browse files » serial: ns16550: enable clock if available ... Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 3 Nov 2014 Sascha Hauer committed on 4 Nov 2014
	d712ce1 Browse files » pinctrl: tegra: add XUSB pad controller ... This is a combined pincontrol/PHY driver for the SerDes lanes on Tegra K1. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 2 Nov 2014 Sascha Hauer committed on 4 Nov 2014
	3e41e75 Browse files » clk: tegra: slow down MSELECT to 102MHz ... Don't know where I got the 204MHZ previously, but 102MHz is the official supported maximum. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 2 Nov 2014 Sascha Hauer committed on 4 Nov 2014