The defconfig files are long untouched and a
make xy_defconfig; make savedefconfig usually generates quite
a different looking file. Refresh them to make it easier to generate
patches against the configs using
make xy_defconfig; make menuconfig; make savedefconfig

This has been done with the following script.

for a in arch/*; do
	arch=$(basename $a)
	for c in $a/configs/*; do
		config=$(basename $c)

	export ARCH=$arch
	make $config && make savedefconfig && mv defconfig $c
	done
done

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

* this compile option actually turns on a command, so name it
  accordingly
* also move the Kconfig definition into commands/Kconfig, thus
  placing getopt into the "Network commands" section
* while at it, improve Kconfig documention

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

this will reduce and simplify defconfigs maintainance
it will also save some disk space

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

this rework is done in order to add a phylib and allow to have phy driver support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

this will allow each arch to handle the boards more simply and depending on
there need

the env var BOARD will refer to the current board dirent

for sandbox as we have only one board the board dirent is arch/sandbox/board

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

This has been done with the following script:

find -path ./.git -prune -o -type f -print0 | xargs -0 -r sed -i \
	-e 's/u2boot/barebox/g' \
	-e 's/U2Boot/barebox/g' \
	-e 's/U-boot V2/barebox/g' \
	-e 's/u-boot v2/barebox/g' \
	-e 's/U-Boot V2/barebox/g' \
	-e 's/U-Boot-v2/barebox/g' \
	-e 's/U_BOOT/BAREBOX/g' \
	-e 's/UBOOT/BAREBOX/g' \
	-e 's/uboot/barebox/g' \
	-e 's/u-boot/barebox/g' \
	-e 's/u_boot/barebox/g' \
	-e 's/U-Boot/barebox/g' \
	-e 's/U-boot/barebox/g' \
	-e 's/U-BOOT/barebox/g'

find -path ./.git -prune -o \( -name "*u-boot*" -o -name "*uboot*" -o -name "*u_boot*" \) -print0 | \
	xargs -0 -r rename 's/u[-_]?boot/barebox/'

It needs some manual fixup following in the next patch

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

The generic A9M2440 comes in many SDRAM variantes. Two GPIO pins describing
the populated SDRAM devices. This patch adds some code to query the setting
and setup a correct SDRAM configuration out of four possible variants.

Due to the lack of hardware the 16 MiB and 128 MiB case is untested yet.

Due to the 32 MiB configuration we must link the u-boot-v2 always to
address 0x31fc0000. Even for the 64 MiB and 128 MiB configuration.

Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de>

Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>