Revert "globalvar: make globalvar functions more consistent" ...

This reverts commit 1b4a05c.

sandbox: Fix registering file/fifo consoles ...

barebox_register_console() uses xzalloc which requires the malloc pool
to be initialized, so call it during the second option parsing when
this is already done.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: fix registering multiple consoles ...

Consoles need to be registered with the "console" device name so that
they are probed by the correct driver. The barebox_register_console()
was already forcing this as it was overwriting the name that was being
passed as argument, but it was failing to provide a unique id for
each new console, so the underlying register_device() would just
return an error when wanting to re-register a device with device name
"console" and id 0.

We remove the unused name parameter from barebox_register_console() as
it is really nowhere used, and also specify DEVICE_ID_DYNAMIC as id,
so that a new unique device id is given to each newly registered
console device.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: fix QSPI platform data init ...

The struct member has been renamed, fix it.

Fixes: fddf254b8b9a (mtd: spi-nor: cadence: change devicetree bindings to upstream)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Kindle-MX50 DT fixes ...

* fix IOMUX for MAX14656 IRQ, it requires a pull-up to work
* enable UART console for Model EY21
* set up IOMUX for EY21 GPIO lid-close hall sensor
* remove IOMUX for non-existing EY21 GPIO keys
* replace space indention with tabs

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Amazon Kindle: Model EY21 compatibility check ...

Extend the compatibility check for i.MX50 based kindles also on model EY21.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PPC: request a consistent memory layout ...

Using the memory test command will crash barebox, because it tests the
area where the stack is located for the PPC architecture.

On PPC the stack is below the barebox binary. Below the stack the malloc
area is located. Until this change some routines used the macros
from 'memory_layout.h', some other calculated their values by their
own - which resulted into an unrequested and unprotected stack area.

Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Amazon Kindle: Add missing compatibility checks ...

Add the checks to prevent Kindle specific code on other machines.
This also adds compatible strings for the Kindle machines as they
currently lack them.

Reported-by: Stefan Riedmüller <S.Riedmueller@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/socfpga'

Merge branch 'for-next/parameter-types'

Merge branch 'for-next/omap'

Merge branch 'for-next/mvebu'

Merge branch 'for-next/imx'

Merge branch 'for-next/arm'

arm: boards: Add MLO handler for EMMC devices ...

This patch enables the barebox handler to flash MLOs on EMMC devices
with 'barebox_update'.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

arm: mach-omap: Change file flags in emmc handler ...

This handler tries to read from a file descriptor with 'write only'
flags and fails. Add read permissions for the file, so the handler can
read the partition layout.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: add arria10 defconfig ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: add support for reflex achilles board ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: add arria10 support ...

Arria10 is a SoC + FPGA like the Cyclone5 SoCFPGA that
is already supported in barebox.
Both a the same in some parts, but totaly different in
others. Most of the hardware blocks are the same in the
SoC parts. The OCRAM is larger on the Arria10 and the
SDRAM controller is different.
The serial core only supports 32bit accesses (different to
the 8bit accesses on the Cyclone5).

As Arria10 has 256KB of OCRAM, it is possible to fit a larger
barebox (and/or use PBL) instead of the two stage bootprocess
used on the Cyclone5 and its 64KB OCRAM.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: make debug_ll configurable ...

Allow configuring the serial port and clock rate
instead of hardcoding it.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: rename socfpga->cyclone5 ...

Prepare the SoCFPGA code base for different system types
(Arria10, Stratix10,...).

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ...

The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch)
and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation.
Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory.

The devices boot in internal boot mode from a build-in eMMC, alternatively
some devices may be set into USB-downloader mode by pressing a specific key
at startup.

Add support for the i.MX50 based Kindle device and make barebox a drop-in
replacement for the factory shipped u-boot image.

Notable features:
- Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard).
- LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used
  for USB-startup and for installation.
- Support for vendor specific ATAGs that are required for the Kindle-System.
- usbserial barebox console access by pressing Select button at startup,
  alternatively full console support on connector J14.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX50: Add imx50.dtsi as workaround ...

The upstream imx50.dtsi is missing the usbphy and usbmisc nodes.
Furthermore, the clock property values for the two existing usb
instances (usbotg and usbh1) is set to a clock which is not present
on the imx50.
Note that usbh2 and usbh3 do not exist on the imx50.

Fix imx50.dtsi to get the usb peripherial mode via DT running,
until imx50.dtsi is fixed upstream.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: cache-l2x0: honour aux_val when determing way size ...

l2x0_init() allows to overwrite bits in the AUX_CTRL register
using the aux_val/aux_mask arguments. On i.MX35 this is used
to pass a correct AUX_CTRL value to overwrite bogus reset values
for this register. To make this work we have to apply
aux_val/aux_mask before using the AUX_CTRL value to determine the
way size.

This fixes: 3f7e890da7 ARM: l2x0: Implement L310 support
Before this commit the way size was hardcoded to 8.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: add Marvell Dove SDHCI driver ...

This adds a driver for the SDHCI controller found on Marvell Dove SoCs.
Despite a missing pinctrl driver, corresponding MPP config has to be
set on a per board basis.

This driver was succesfully tested with Solidrun Dove Cubox.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: socfpga: dtsi: use upstream node ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: spi-nor: cadence: change devicetree bindings to upstream ...

Upstream devicetree bindings where changed to use "cdns,is-decoded-cs"
instead of "external-decoder". Use it.
Also, get rid of the clock-names "qspi_clk" dependency.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: imx: HAB needs fuse driver support ...

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

globalvar: make globalvar functions more consistent ...

Similar to the device parameter functions also make the globalvar
functions more consistent. This also adds support for readonly
globalvars and changes several existing globalvars which should
really be readonly to readonly.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: make parameter functions more consistent ...

This patch creates a consitent set of device parameter functions.

With this we have: dev_add_param_<type><access>

"type" is one of: int32, uint32, int64, uint64, string, mac, ipv4, enum, bitmask
The improvement here is that we now can exactly specify the width of the
int type parameters and also correctly distinguish between signed and
unsigned variables which means that a variable no longer ends up with
INT_MAX when it's assigned -1.

"access" can be empty for regular read/write parameter, "_ro" for readonly
parameters which get their value from a variable pointer in the
background or "_fixed" for parameters which are set to a fixed value
(without a pointer in the background).

Some more exotic types are not (yet) implemented, like
dev_add_param_ip_ro.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>