LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / mach-imx / Kconfig

2017-05-05	ce936cd Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 5 May 2017
2017-04-24	2c506af Browse files » ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ... The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch) and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation. Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory. The devices boot in internal boot mode from a build-in eMMC, alternatively some devices may be set into USB-downloader mode by pressing a specific key at startup. Add support for the i.MX50 based Kindle device and make barebox a drop-in replacement for the factory shipped u-boot image. Notable features: - Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard). - LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used for USB-startup and for installation. - Support for vendor specific ATAGs that are required for the Kindle-System. - usbserial barebox console access by pressing Select button at startup, alternatively full console support on connector J14. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 23 Apr 2017 Sascha Hauer committed on 24 Apr 2017
2017-04-19	340a6e8 Browse files » ARM: imx: HAB needs fuse driver support ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Apr 2017 Sascha Hauer committed on 19 Apr 2017
2017-03-20	d711ade Browse files » ARM: i.MX7: Kconfig: ARCH_IMX7 selects PINCTRL_IMX_IOMUX_V3 ... fsl,imx7d-iomuxc is provided by selecting PINCTRL_IMX_IOMUX_V3. Select it since a system without it will not be very usefull. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 19 Mar 2017 Sascha Hauer committed on 20 Mar 2017
2017-03-09	3ca576c Browse files » scripts: imx/mxs remove mxs-usb-loader ... ... and use imx-usb-loader instead Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 7 Mar 2017 Sascha Hauer committed on 9 Mar 2017
2017-02-16	8175ff1 Browse files » arm: imx: don't let MACH_SABRELITE select HAVE_PBL_MULTI_IMAGES ... MACH_SABRELITE is only selectable if IMX_MULTI_BOARDS is enabled. The latter already selects HAVE_PBL_MULTI_IMAGES. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 14 Feb 2017 Sascha Hauer committed on 16 Feb 2017
2017-02-07	aefc678 Browse files » i.MX: vf610: Add support for ZII VF610 Dev Family ... Add support for ZII VF610 Dev based designs such as: - VF610 Dev, revision B - VF610 Dev, revision C - CFU1, revision A - SPU3, revision A - SCU4 AIB, revision C Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 3 Feb 2017 Sascha Hauer committed on 7 Feb 2017
2017-02-01	9a16b02 Browse files » ARM i.MX: add SoC type detection for i.MX6SL ... The i.MX6 series SoC type is determined by barebox by examining the USB_ANALOG_DIGPROG aka IMX6_ANATOP_SI_REV register. This register is located at a common offset for all mx6 SoC - except for i.MX6SL where a different offset is used. This creates a dilemma while distinguishing the mx6sl from non-mx6sl SOC since the SoC type identification register location is type specific itself. Access to undocumented and probably invalid or unpredictable registers should be avoided as possible. For the mx6sl detection an access to the general USB_ANALOG_DIGPROG @0x260 cannot be avoided when running on mx6sl. This register contained the value 0x00014009 for different mx6sl Rev. 1.2 based e-book readers using MCIMX6L7DVN10AB and MCIMX6L8DVN10AB SoC. This implementation assumes the value of MAJOR_UPPER (here 0x01) to be smaller than the smallest non-6sl MAJOR_UPPER (0x61 for mx6s). Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 30 Jan 2017 Sascha Hauer committed on 1 Feb 2017
2017-01-26	5289e63 Browse files » ARM: i.MX7: Kconfig: ARCH_IMX7 selects COMMON_CLK_OF_PROVIDER ... Build of clk-imx7 depends on selection of COMMON_CLK_OF_PROVIDER Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 25 Jan 2017 Sascha Hauer committed on 26 Jan 2017
2017-01-20	eb101ad Browse files » ARM: i.MX: Add WaRP7 board support ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 20 Jan 2017
2017-01-20	ea55770 Browse files » ARM: i.MX: Add i.MX7 base architecture support ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 20 Jan 2017
2017-01-18	6031c0e Browse files » ARM: imx: Add support for ZII RDU2 board ... Add support for RDU2 board from Zodiac Inflight Innovations. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 30 Nov 2016 Sascha Hauer committed on 18 Jan 2017
2017-01-12	21921f7 Browse files » i.MX: vf610: Ramp CPU clock to maximum frequency ... Mask ROM leaves the CPU running at 264Mhz, so configure the clock tree such that CPU runs at maximum supported frequency. Maximum supported frequncy is determined from speed grading burned into OCOTP fusebox by the vendor. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 10 Jan 2017 Sascha Hauer committed on 12 Jan 2017
2017-01-12	dcedcec Browse files » Merge branch 'for-next/vybrid' Sascha Hauer committed on 12 Jan 2017
2017-01-11	69c436e Browse files » i.MX: Kconfig: Enable OCOTP on Vybrid ... Enable OCOTP driver on Vybrid as well as i.MX6 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 9 Nov 2016 Sascha Hauer committed on 11 Jan 2017
2017-01-10	f4d4b65 Browse files » ARCH: ARM: Add support for phytec-phycore-imx6ul ... Add support for the phycore i.MX6 UltraLite. - 512MB RAM - 512MB NAND - 10/100 Mbit Ethernet Signed-off-by: Christian Hemp <c.hemp@phytec.de> Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christian Hemp authored on 13 Dec 2016 Sascha Hauer committed on 10 Jan 2017
2017-01-10	74b5d35 Browse files » ARM: i.MX: Add src fixup ... Some boards or SoCs need the SRC_SCR[WARM_RESET_ENABLE] bit cleared, otherwise they won't come up after a watchdog reset. This was observed on one i.MX6ul based custom board. The Linux Kernel does the same since 2012: 0575fb7 ARM: 7198/1: arm/imx6: add restart support for imx6q. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Jan 2017
2016-11-14	8eb1fb3 Browse files » Merge branch 'for-next/vybrid' Sascha Hauer committed on 14 Nov 2016
2016-11-14	6b00efc Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 14 Nov 2016
2016-11-11	d8162dd Browse files » i.MX: Add support for VF610 Tower board ... Add support for VF610 Tower board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 9 Nov 2016 Sascha Hauer committed on 11 Nov 2016
2016-11-11	d08d788 Browse files » i.MX: Add primitive functions for VF610 family ... Add very basic functions to support VF610 family. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 9 Nov 2016 Sascha Hauer committed on 11 Nov 2016
2016-11-08	e73608c Browse files » ARM: i.MX: beginning i.MX6ul support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Nov 2016
2016-10-10	df75f19 Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 10 Oct 2016
	db9c78d Browse files » Merge branch 'for-next/defenv' Sascha Hauer committed on 10 Oct 2016
	790980b Browse files » Make generic default environment type a use choice ... So far it was hardcoded for each board if defenv-1 or defenv-2 is used. Make this a user choice so that a particular board no longer enforces a defenv type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Oct 2016
2016-09-22	8840b3e Browse files » ARM: i.MX53 Vincell: Add NAND xload support ... The Vincell boards do the SDRAM setup from board init code, so the image size is limited to the internal SRAM size. To overcome this limitation use the NAND xload support. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 22 Sep 2016
2016-09-12	f6ebdf2 Browse files » Add i.MX50 support ... Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Sep 2016 Sascha Hauer committed on 12 Sep 2016
2016-08-03	0c61905 Browse files » ARM: nitrogen: rename to nitrogen6 ... Now that the MAX variant of the board is also supported by the same code, rename the board directory to the more generic nitrogen6. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 22 Jul 2016 Sascha Hauer committed on 3 Aug 2016
2016-07-11	4f0abb8 Browse files » ARM i.MX35: Add support for the Amazon Kindle3 ... The Amazon Model No. D00901 Kindle3 is an E-Book reader based on the i.MX35 SOC. The device boots in internal boot mode from a build-in eMMC, alternatively the device may be set into USB-downloader mode when the Vol+ key is pressed on startup. Add support for this device and make barebox a drop-in replacement for the factory shipped u-boot image. Constraints for the use as drop-in replacement: - imximg header (offset 0x400) has a maximum size of 2kB minus 16 byte since the last 16 bytes are used to store a vendor specific hardware desctription identifier - the bootloader space (application plus env) is limited to 256kB minus 16 bytes when installed with offset of 4kB (the u-boot offset was 3kB). A vendor specific device identifier is stored in the gap between application and kernel. The vendor specific identifiers should not be overwritten. Notable features: - Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard) - Full support for vendor specific ATAGs - usbserial barebox console access by pressing Select button at startup, alternatively full console support on connector J14. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 9 Jul 2016 Sascha Hauer committed on 11 Jul 2016
2016-04-01	bf1e795 Browse files » ARM: i.MX: remove unused imx-flash-header.h ... All i.MX images are nowadays built with the imx-image tool, so we do not need the header files and Kconfig options anymore. Remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Apr 2016