param: make parameter functions more consistent ...

This patch creates a consitent set of device parameter functions.

With this we have: dev_add_param_<type><access>

"type" is one of: int32, uint32, int64, uint64, string, mac, ipv4, enum, bitmask
The improvement here is that we now can exactly specify the width of the
int type parameters and also correctly distinguish between signed and
unsigned variables which means that a variable no longer ends up with
INT_MAX when it's assigned -1.

"access" can be empty for regular read/write parameter, "_ro" for readonly
parameters which get their value from a variable pointer in the
background or "_fixed" for parameters which are set to a fixed value
(without a pointer in the background).

Some more exotic types are not (yet) implemented, like
dev_add_param_ip_ro.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: update enable status when using the internal API ...

Without these, 'devinfo pwmX' will show enabled=0 even though the PWM
was enabled (for example by a pwm-backlight).

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

string: Fix (v)asprintf prototypes ...

Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: Add MXS PWM support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: Allow multiple PWMs per device node ...

Matching a device node is enough since a device node may have
multiple PWMs. Check for a id aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: use 'const void *' for struct of_device_id.data ...

Since 2011 barebox' of_device_id struct uses unsigned long type for data field:

    struct of_device_id {
            char *compatible;
            unsigned long data;
    };

Almost always struct of_device_id.data field are used as pointer
and need 'unsigned long' casting.

E.g. see 'git grep -A 4 of_device_id drivers/' output:

    drivers/ata/sata-imx.c:static __maybe_unused struct of_device_id imx_sata_dt_ids[] = {
    drivers/ata/sata-imx.c- {
    drivers/ata/sata-imx.c-         .compatible = "fsl,imx6q-ahci",
    drivers/ata/sata-imx.c-         .data = (unsigned long)&data_imx6,
    drivers/ata/sata-imx.c- }, {

Here is of_device_id struct in linux kernel v4.0:

    struct of_device_id {
            char name[32];
            char type[32];
            char compatible[128];
            const void *data;
    };

Changing of_device_id.data type to 'const void *data' will increase
barebox' linux kernel compatibility and decrease number of 'unsigned
long' casts.

Part of the patch was done using the 'coccinelle' tool with the
following semantic patch:

    @rule1@
    identifier dev;
    identifier type;
    identifier func;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type)
    + dev_get_drvdata(dev, (const void **)&type)
    ...>
    }
    @rule2@
    identifier dev;
    identifier type;
    identifier func;
    identifier data;
    @@
    func(...) {
    <...
    - dev_get_drvdata(dev, (unsigned long *)&type->data)
    + dev_get_drvdata(dev, (const void **)&type->data)
    ...>
    }

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: i.MX: register successfully without alias ...

When a PWM does not have an of alias generate a name from the
base address so that we can register it successfully.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

resource: Let dev_request_mem_region return an error pointer ...

For all users fix or add the error check.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: Implement devicetree support ...

This implements of_pwm_request() for PWM client drivers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: Add functions for getting/setting period/duty cycle ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: Add i.MX PWM driver ...

The Kernel driver from Linux-3.13 with some adjustments for
barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: pxa: use pwmx as devname ...

As this changes the name of the pwm we also have to adjust it in
pwm_request.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

PWM: Use a separate device for PWMs ...

Instead of directly using the hardware devicet for PWMs register
a logical PWM device so that the user operates on pwmx devices rather
than pxa-pwmx.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pwm: sanity check values before passing them to the drivers ...

Check for valid period size before calling ops->config. This fixes
the pxa driver which otherwise does a division by zero. While at
it, also check for duty_ns being smaller or equal to period_ns.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>

pwm: Use dev_add_param_int for pwm parameters ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>

switch all platform_bus device/driver registering to platform_driver/device_register ...

now register_driver and register_device are for bus only usage.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pwm PXA: Compile only on PXA ...

The PXA PWM driver does not compile on any other architecture, so
depend on PXA.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/pwm: add PXA pulse width modulator controller ...

Add PXA embedded pulse width modulator support. The PWM can
generate signals from 49.6kHz to 1.625MHz.
The driver is for pxa2xx family. The pxa3xx was not handled yet.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/pwm: add duty_ns and period_ns to core pwm chip ...

Add variables to control the duty_ns and period_ns of PWM
chips. When these variables are set, a call to either
pwm_enable() or pwm_config() is performed to enforce the
setup values.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add pwm core support ...

This patch adds framework support for PWM (pulse width modulation)
devices.
A new pwm can be registered from a hardware driver using
pwmchip_add(). It can then be requested from a client driver using
pwm_request(). A string is used as a unique identifier for the
pwms. It should usually be initialized by the hardware drivers
using dev_name(dev). The client API is the same as currently
in the Linux Kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>