LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch / arm / mach-imx / Kconfig

2018-06-11	63a9b9b Browse files » Merge branch 'for-next/imx-ocotp' Sascha Hauer committed on 11 Jun 2018
2018-06-08	a5e45f7 Browse files » ARM: Add i.MX8 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [andrew.smirnov@gmail.com: fix B0 chips to report IMX_CHIP_REV_2_0] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Jun 2018
2018-05-31	137e8e3 Browse files » i.MX: ocotp: Move OCOTP driver to drivers/nvmem ... Move OCOTP driver to drivers/nvmem to be consistent with Linux kerenel. Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 29 May 2018 Sascha Hauer committed on 31 May 2018
2018-04-12	4212383 Browse files » ARM: Add Advantech imx6 board support ... Add support for Advantech i.MX6 SOM named ROM-7421. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Christoph Fritz authored on 9 Apr 2018 Sascha Hauer committed on 12 Apr 2018
2018-03-26	9713660 Browse files » i.MX53/TX53: rework to dts based boot ... Since nobody likes to use platformcode based machines any more, we also switch this one to use dts based booting. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 23 Mar 2018 Sascha Hauer committed on 26 Mar 2018
2018-03-21	25f95e5 Browse files » boards: samx6: add initial support for kontron samx6i ... Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 19 Mar 2018 Sascha Hauer committed on 21 Mar 2018
2017-11-21	e066ea0 Browse files » ARM: imx: santaro: select i2c ... The board support tries to access a i2c bus to find out which touchscreen is connected. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 17 Nov 2017 Sascha Hauer committed on 21 Nov 2017
2017-10-17	74bc356 Browse files » ARM: Add i.MX6ull evk support ... The i.MX6ull-EVK is a evaluation board for the i.MX6ull from NXP. The upstream DTS is used, support should be fairly complete: - 2x fec ethernet - 1x USB Host - 1x USB OTG - 2x SD Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Oct 2017
2017-08-15	54b8f07 Browse files » ARM: imx: ccmx53: select I2C ... The board file needs i2c support to enable a regulator. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Lucas Stach committed on 15 Aug 2017
2017-07-31	361c36d Browse files » Merge branch 'for-next/misc' Lucas Stach committed on 31 Jul 2017
	5e9ef13 Browse files » ARM: imx: hab: depend on OFDEVICE ... The selected OCOTP driver requires OFDEVICE support. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Lucas Stach committed on 31 Jul 2017
	bed6bfa Browse files » ARM: imx: kindle: select ARM_LINUX ... The already selected ARM_BOARD_APPEND_ATAG depends on it. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Lucas Stach committed on 31 Jul 2017
2017-07-30	a0a5a7b Browse files » ARM: i.MX: Add support for NXP i.MX7 SABRESD board ... Add minimal code to support NXP i.MX7 SABRESD board. Tested to have working SD card and first Ethernet port as well as being able to boot upstream Linux kernel (4.12+). Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Andrey Smirnov authored on 28 Jul 2017 Lucas Stach committed on 30 Jul 2017
2017-07-30	5d765c0 Browse files » ARM: i.MX: Add ARCH_HAD_FEC_IMX to ARCH_IMX7 ... Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Andrey Smirnov authored on 28 Jul 2017 Lucas Stach committed on 30 Jul 2017
2017-07-20	03c381f Browse files » ARM: imx: phyCORE i.MX7 on phyBOARD-Zeta support ... This adds preliminary support for the phyCORE i.MX7 module on a phyBOARD-Zeta baseboard. The DTs will likely change in the future when PHYTEC finalizes their BSP. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Sascha Hauer authored on 19 Jul 2017 Lucas Stach committed on 20 Jul 2017
2017-06-07	5f7e0d1 Browse files » ARM: i.MX6: add Technexion Pico Hobbit support ... This adds support for the i.MX6UL Technexion Pico Hobbit. The board comes with different amounts of RAM. We create one image for the 256MB and one for the 512MB variant. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> --- v1 -> v2: - removed already prepared clock setup v2 -> v3: - added phy-reset-post-delay as the support is now available Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 7 Jun 2017 Sascha Hauer committed on 7 Jun 2017
2017-05-05	ce936cd Browse files » Merge branch 'for-next/imx' Sascha Hauer committed on 5 May 2017
2017-04-24	2c506af Browse files » ARM: i.MX50: Add support for i.MX50 based Amazon Kindle e-book readers ... The Kindle Model No. D01100 (Kindle Wi-Fi), D01200 (Kindle Touch) and EY21 (Kindle Paperwhite) are refered as the Kindle 4th and 5th generation. Those models are based on an i.MX50 SoC and use LPDDR1 or LPDDR2 Memory. The devices boot in internal boot mode from a build-in eMMC, alternatively some devices may be set into USB-downloader mode by pressing a specific key at startup. Add support for the i.MX50 based Kindle device and make barebox a drop-in replacement for the factory shipped u-boot image. Notable features: - Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard). - LPDDR1 and LPDDR2 setup is done via DCD, the same imximage may be used for USB-startup and for installation. - Support for vendor specific ATAGs that are required for the Kindle-System. - usbserial barebox console access by pressing Select button at startup, alternatively full console support on connector J14. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 23 Apr 2017 Sascha Hauer committed on 24 Apr 2017
2017-04-19	340a6e8 Browse files » ARM: imx: HAB needs fuse driver support ... Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 12 Apr 2017 Sascha Hauer committed on 19 Apr 2017
2017-03-20	d711ade Browse files » ARM: i.MX7: Kconfig: ARCH_IMX7 selects PINCTRL_IMX_IOMUX_V3 ... fsl,imx7d-iomuxc is provided by selecting PINCTRL_IMX_IOMUX_V3. Select it since a system without it will not be very usefull. Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 19 Mar 2017 Sascha Hauer committed on 20 Mar 2017
2017-03-09	3ca576c Browse files » scripts: imx/mxs remove mxs-usb-loader ... ... and use imx-usb-loader instead Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 7 Mar 2017 Sascha Hauer committed on 9 Mar 2017
2017-02-16	8175ff1 Browse files » arm: imx: don't let MACH_SABRELITE select HAVE_PBL_MULTI_IMAGES ... MACH_SABRELITE is only selectable if IMX_MULTI_BOARDS is enabled. The latter already selects HAVE_PBL_MULTI_IMAGES. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 14 Feb 2017 Sascha Hauer committed on 16 Feb 2017
2017-02-07	aefc678 Browse files » i.MX: vf610: Add support for ZII VF610 Dev Family ... Add support for ZII VF610 Dev based designs such as: - VF610 Dev, revision B - VF610 Dev, revision C - CFU1, revision A - SPU3, revision A - SCU4 AIB, revision C Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 3 Feb 2017 Sascha Hauer committed on 7 Feb 2017
2017-02-01	9a16b02 Browse files » ARM i.MX: add SoC type detection for i.MX6SL ... The i.MX6 series SoC type is determined by barebox by examining the USB_ANALOG_DIGPROG aka IMX6_ANATOP_SI_REV register. This register is located at a common offset for all mx6 SoC - except for i.MX6SL where a different offset is used. This creates a dilemma while distinguishing the mx6sl from non-mx6sl SOC since the SoC type identification register location is type specific itself. Access to undocumented and probably invalid or unpredictable registers should be avoided as possible. For the mx6sl detection an access to the general USB_ANALOG_DIGPROG @0x260 cannot be avoided when running on mx6sl. This register contained the value 0x00014009 for different mx6sl Rev. 1.2 based e-book readers using MCIMX6L7DVN10AB and MCIMX6L8DVN10AB SoC. This implementation assumes the value of MAJOR_UPPER (here 0x01) to be smaller than the smallest non-6sl MAJOR_UPPER (0x61 for mx6s). Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 30 Jan 2017 Sascha Hauer committed on 1 Feb 2017
2017-01-26	5289e63 Browse files » ARM: i.MX7: Kconfig: ARCH_IMX7 selects COMMON_CLK_OF_PROVIDER ... Build of clk-imx7 depends on selection of COMMON_CLK_OF_PROVIDER Signed-off-by: Alexander Kurz <akurz@blala.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Kurz authored on 25 Jan 2017 Sascha Hauer committed on 26 Jan 2017
2017-01-20	eb101ad Browse files » ARM: i.MX: Add WaRP7 board support ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 20 Jan 2017
2017-01-20	ea55770 Browse files » ARM: i.MX: Add i.MX7 base architecture support ... Signed-off-by Juergen Borleis <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Borleis authored on 6 Dec 2016 Sascha Hauer committed on 20 Jan 2017
2017-01-18	6031c0e Browse files » ARM: imx: Add support for ZII RDU2 board ... Add support for RDU2 board from Zodiac Inflight Innovations. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 30 Nov 2016 Sascha Hauer committed on 18 Jan 2017
2017-01-12	21921f7 Browse files » i.MX: vf610: Ramp CPU clock to maximum frequency ... Mask ROM leaves the CPU running at 264Mhz, so configure the clock tree such that CPU runs at maximum supported frequency. Maximum supported frequncy is determined from speed grading burned into OCOTP fusebox by the vendor. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 10 Jan 2017 Sascha Hauer committed on 12 Jan 2017
2017-01-12	dcedcec Browse files » Merge branch 'for-next/vybrid' Sascha Hauer committed on 12 Jan 2017