ratp: new reset command ...

E.g.:
    $ ./bbremote -v --port /dev/ttyUSB2 reset

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: new md and mw commands ...

This commit introduces support for running the md and mw commands
using the binary interface provided by RATP. This allows clients to
read and write memory files without needing to do custom string
parsing on the data returned by the console 'md' and 'mw' operations.

The request and response messages used for these new operations are
structured in the same way:

 * An initial fixed-sized section includes the fixed-sized
   variables (e.g. integers), as well as the size and offset of the
   variable-length variables.

 * After the initial fixed-sized section, the buffer is given, which
   contains the variable-length variables in the offsets previously
   defined and with the size previously defined.

The message also defines separately the offset of the buffer
w.r.t. the start of the message. The endpoint reading the message will
use this information to decide where the buffer starts. This allows to
extend the message format in the future without needing to break the
message API, as new fields can be appended to the fixed-sized section
as long as the buffer offset is also updated to report the new
position of the buffer.

E.g.:
    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0102030405
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0102030405

    $ ./bbremote --port /dev/ttyUSB2 mw /dev/pic_eeprom_rdu 0x107 0000000000
    5 bytes written

    $ ./bbremote --port /dev/ttyUSB2 md /dev/pic_eeprom_rdu 0x107 5
    0000000000

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: use xstrndup() instead of a custom xmemdup_add_zero() ...

The console operations done via RATP expect strings, so just use
xstrndup() instead of defining a custom method.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement getenv as a standard ratp command ...

Also, use xstrndup() instead of the custom xmemdup_add_zero() as we're
working with strings anyway.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: implement ping as a standard ratp command ...

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: allow building without full console support ...

Make CONFIG_RATP a selectable config option, so that the user can
enable RATP support without explicitly needing to enable the full
console support over RATP (e.g. only for RATP FS or built-in command
support).

The full console can still be explicitly enabled with
CONFIG_CONSOLE_RATP.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ratp: moved logic to its own subdirectory ...

We are going to add new RATP command implementations in separate files
within this subdirectory.

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>