i.MX: i2c: Fix build error in debug output code ...

Looks like that particular chunk of the code have not been built in a
while and bitrotted. Change function parameters appropriately to avoid
breaking the build.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c-mux-pca954x: fix out-of-bounds write for 64 bit systems ...

get_drv_data(..., &data->type) overwrites memory beyond data->type member due
to mismatch of sizeof(enum pca_type) and sizeof(void *) on 64 bit systems.

Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: i2c_master_send(): don't leave flags uninitialized ...

Leaving the flags field unitialized can lead to performing
read operation instead of write operation.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: read/write_reg: don't assume client->dev to be valid ...

When using the barebox commands i2c_read or i2c_write the client pointer
passed to the respective function isn't completely initialized. This
makes

	dev_dbg(&client->dev, ...);

choke as it dereferences client->dev.driver->name with
client->dev.driver being a random value.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: designware: evaluate i2c-sda-hold-time property ...

Newer designware i2c controllers allow setting the SDA hold time.
Evaluate the devicetree property "i2c-sda-hold-time" and set the
value accordingly.
The code is an adaption of the Linux v4.12 driver.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: mv64xxx: add timeout waiting for bus ready ...

This prevents barebox hanging e.g. in case the i2c clock is accidentally
connected to GND.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: mv64xxx: fix indentation ...

The patch fixes this compiler's warning:

    drivers/i2c/busses/i2c-mv64xxx.c: In function ‘mv64xxx_i2c_fsm’:
    drivers/i2c/busses/i2c-mv64xxx.c:303:3: warning: this ‘if’ clause does
    not guard... [-Wmisleading-indentation]
       if (drv_data->bytes_left == 1)
       ^~
    drivers/i2c/busses/i2c-mv64xxx.c:305:4: note: ...this statement, but the
    latter is misleadingly indented as if it is guarded by the ‘if’
        udelay(2);
        ^~~~~~

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mvebu'

i2c: mv64xxx: simplify mv64xxx_i2c_wait_for_completion ...

Two nested while loops are not necessary here, so integrate the read,
i2c_fsm and i2c_do_action calls into mv64xxx_i2c_wait_for_completion()
and remove the obsolete interrupt remains.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: mv64xxx: add software delays ...

As stated in Marvell's Functional Specifications in MV-S107021-U0 Rev. A
on page 420 ff. software delays are needed. "SW delay represent a delay
of at least 2 internal clock cycles". These delays are hereby
implemented.

The original kernel driver compensates the needed software delays with
the time the interrupts take.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: i2c: fix i2c-fsl for non-OF boards ...

With commit 4ed5b778a56b ("i.MX: i2c: Add Vybrid support") i2c-fsl probe
returns -EINVAL for all non-OF boards.
Since newer planforms, especially vf610 are restricted OF-only it is safe to
assume "fsl,imx21-i2c" if CONFIG_OFDEVICE is not set.

Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: i.MX: Enable clock ...

For architectures which do not enable all clocks during initialization.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/vybrid'

Merge branch 'for-next/misc'

i.MX: i2c: Add Vybrid support ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX: i2c: Use read/write adapter functions ...

Use read/write adapter functions instead of directly calling to
readb/writeb. This is needed to prepare driver code to support Vybrid
SoC's variant of this block.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c-mux-pca954x: Add code to control reset line ...

Most recent device tree binding for that mux support specifying a GPIO
connected to a reset line of that chip. Add code to handle that binding
in order to be able to use the chip on boards that leverage
aforementioned functionality.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: gpio: use dynamic bus number unconditionally ...

While being a bit more random this helps dt setups where the id of a
platform device cannot easily be fixed anyhow.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: gpio: fix handling of return code of of_get_gpio ...

Instead of using gpio_is_valid just check the return code of of_get_gpio
for being < 0. This fixes -EPROBE_DEFER handling as now this error code
is handed to the caller instead of -ENODEV. If the gpio returned by
of_get_gpio is an invalid number this isn't noticed by
of_i2c_gpio_probe, but then gpio_request later fails which is good
enough.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: replace dev_request_mem_region with dev_request_mem_resource ...

dev_request_mem_region doesn't work properly one some SoCs on which
PTR_ERR() values clash with valid return values from dev_request_mem_region.
Replace them with dev_request_mem_resource where possible.

This patch has been generated with the following semantic patch:

// <smpl>
@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
...
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
-	return PTR_ERR(io);
-}
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
-if (IS_ERR(io)) {
-	ret = PTR_ERR(io);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores)) {
+	ret = PTR_ERR(iores);
...
}
+io = IOMEM(iores->start);
...+>
}

@@
expression d;
expression n;
expression io;
identifier func;
@@
func(...) {
+struct resource *iores;
<+...
-io = dev_request_mem_region(d, n);
+iores = dev_request_mem_resource(d, n);
+if (IS_ERR(iores))
+	return PTR_ERR(iores);
+io = IOMEM(iores->start);
...+>
}

@@
identifier func;
@@
func(...) {
<+...
struct resource *iores;
-struct resource *iores;
...+>
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

driver: Fix return check of dev_request_mem_region ...

dev_request_mem_region returns an ERR_PTR, fix places which check for a
NULL pointer instead. This patch has been generated with this semantic
patch, written by me and improved by Andrey Smirnov:

// <smpl>
@@
expression e;
expression e1;
@@
e = dev_request_mem_region(...);
...
-if (!e)
-	return e1;
+if (IS_ERR(e))
+	return PTR_ERR(e);

@ rule1 @
expression e;
@@
e = dev_request_mem_region(...);

@@
expression rule1.e;
identifier ret, label;
constant errno;
@@
if (!e) {
	...
(
-	ret = -errno;
+	ret = PTR_ERR(e);
	...
	goto label;
|
-	return -errno;
+	return PTR_ERR(e);
)
}

@depends on rule1@
expression rule1.e;
@@
-	if (e == NULL)
+	if (IS_ERR(e))
{
...
}
// </smpl>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>

i2c: core: Add client I2C address to devinfo ...

Useful bit of information.  Example:
barebox:/ devinfo dummy0
Bus: i2c
  Address: 0x52

Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: add pca954x bus multiplexer driver ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: import multiplexed I2C bus core support from linux kernel ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: Create for_each_i2c_adapter() ...

This can be used by the i2c_probe command to iterate over i2c adapters.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c-imx: Use xzalloc instead of kzalloc ...

Driver's private data structure is allocated with kzalloc without any
code to check for kzalloc's possible failure. Fix that by replaceing
kzalloc with xzalloc.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: Add support for DesignWare controllers ...

Add a driver for DesignWare I2C controller IP block found on several
SoCs including Altera SoC products

Tested using Terrasic SoCKit board and GPIO expander board with I2C
EEPROM on it

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i2c: fsl: Add bus recovery support ...

Useful for recovering busses. This needs additional device tree properties
describing the sda/scl gpios. The corresponding linux patch with the binding
description is currently under review.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/misc'

i2c: gpio: add bus recovery support ...

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>