LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / arch

2018-11-06	705c74f Browse files » ARM: socfgpa: de0-nano-soc: convert to lowlevel helpers ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	b5d01ad Browse files » ARM: socfpga: sockit: convert to lowlevel helper ... Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	3925e51 Browse files » ARM: socfpga: add lowlevel header with common code ... Apart from the RAM size, all cyclone5-based Socfpga boards use the same lowlevel code. Instead of duplicating it for every board, move it to mach-socfpga and provide a macro to use it in the boardspecific code. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Steffen Trumtrar authored on 2 Nov 2018 Sascha Hauer committed on 6 Nov 2018
	9984960 Browse files » ARM: rdu2: Replace board code with gpio-hog nodes ... Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Andrey Smirnov authored on 26 Oct 2018 Sascha Hauer committed on 6 Nov 2018
2018-11-05	c60aa1f Browse files » ARM: rpi: autosize malloc area ... Autosize the malloc area according to the available RAM size. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	94f6a71 Browse files » ARM: rpi: add raspberry pi 3 support ... This adds basic support at the same feature level as the other supported raspberry pi boards. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	5db9fdc Browse files » ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero ... Signed-off-by: Enrico Joerns <ejo@pengutronix.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Enrico Joerns authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	6189e25 Browse files » ARM: install HYP vectors at PBL and Barebox entry ... If the CPU was already in HYP mode when entering the PBL, install a simple trap handler to allow to get back from SVC to HYP before switching to HYP mode. As the vectors are part of the currently running binary, we need to do the same setup when starting the real Barebox binary, as the PBL setup vectors might get overwritten. To do this we trap into HYP mode just before jumping to Barebox and then re-do the vector setup and SVC switch as the first thing in Barebox proper. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	45ea4b2 Browse files » ARM: default to starting kernel in HYP mode when entered in HYP ... When Barebox has been entered in HYP mode, there is a high chance that the kernel is intended to be started in HYP mode also. Get this default into place. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	245550b Browse files » ARM: don't try to install secure monitor when entered in HYP mode ... When Barebox has been entered in HYP mode, the CPU is already switched to the non-secure world and it's not possible for Barebox to install it's own secure monitor. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	296fa43 Browse files » ARM: add file for HYP mode related setup ... This adds routines to add hyp mode vectors and switch back to HYP mode from SVC. This is needed in both the PBL and Barebox proper. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 5 Nov 2018
	eaa7fcf Browse files » ARM: at91: Add SoC namespace to matrix defines ... Add SoC namespace to matrix define so we have one source less of conflicting defines. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	d1484e9 Browse files » ARM: at91: remove common matrix header file ... The common matrix header file can be removed when the users include the SoC specific one. Fix the only user and remove the file. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	21d3a53 Browse files » ARM: at91: consolidate phy reset functions ... Many boards have the same ethernet phy reset function, so share the code in a common function. While at it remove the AT91_RSTC offset from the rstc register defines. AT91_RSTC was the offset between the AT91_SYSTEM_BASE and the reset controller. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	4f9e249 Browse files » ARM: at91: remove AT91_SDRAM_BASE ... AT91_SDRAM_BASE is only used in board code which known the SDRAM base address, so we do not need a common define. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	cd46f9b Browse files » ARM: at91: drop AT91_NB_USART ... AT91_NB_USART only used to return an error from at91_register_uart() if an invalid UART number is passed. This will never happen as the linker fails earlier in that case, so the runtime check can be removed and with it the now unused AT91_NB_USART define. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	61a2217 Browse files » ARM: at91: remove unused defines ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	24c3bf7 Browse files » ARM: at91sam926x: Add header for at91sam926x common base addresses ... There are some base addresses common to at91sam926x. Add a separate header for these. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	1487d9d Browse files » ARM: at91rm9200ek: Use SoC specific defines ... Use AT91RM9200_BASE_PIOC rather than AT91_BASE_PIOC so we can get rid of the latter later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	f67e4f2 Browse files » ARM: at91: remove unused CONSISTENT_DMA_SIZE defines ... CONSISTENT_DMA_SIZE is unused, remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	d8042ed Browse files » ARM: at91: remove unused AT_DMA_ID_ defines ... The defines are unused and not properly namespaced, so remove them. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Nov 2018
	15afd9d Browse files » ARM: at91: Add initial support for the EVB-KSZ9477 eval board ... The EVB-KSZ9477 is an evaluation board for the KSZ9477 ethernet switch. This board is equipped with a atsama5d3 SoC with 256MiB of SDRAM, 256MiB of NAND flash and a SD card slot. For now only second stage booting is supported with AT91bootstrap as first stage loader. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 30 Oct 2018 Sascha Hauer committed on 5 Nov 2018
	8635785 Browse files » arm: at91: fix sdram controller init ... e739663535 confused parameters to __raw_writel. The value and the base address was mixed up. Fixes: e739663535 (arm: at91: code cleanup in at91sam926x_board_init) Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ahmad Fatoum authored on 30 Oct 2018 Sascha Hauer committed on 5 Nov 2018
2018-11-02	92f5e94 Browse files » ARM: rdu2: fix warnings in Barebox internal DT ... Drop partially wrong pcie nodes, so we pick up the correct ones from the kernel DT. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018
	fe1901c Browse files » ARM: rdu2: program e1000 iNVM ... Check if the iNVM is already correctly written. If it isn't write the correct value in, so the device uses the correct PCI ID for the Linux driver. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018
	c8e09aa Browse files » ARM: rdu2: configure the USB port as OTG ... While the USB port is host-only for the Linux system, it is useful to be able to switch it into device mode for debugging purposes in Barebox. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018
	98af193 Browse files » ARM: rdu2: config PMIC SW1AB and SW1C rails to 1.375 ... This is the default out-of-reset voltage, but if only the i.MX6 SoC got reset, the PMIC might still be stuck at the lower voltage for the slow operating point. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018
	3c2b8f3 Browse files » ARM: allow secure monitor code to be built without PSCI ... The hyp mode handling added in the secure monitor code is also useful when Barebox doesn't have PSCI control. Allow to build without PSCI. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018
	4129219 Browse files » ARM: safely switch from HYP to SVC mode if required ... This is a port of the Linux safe_svcmode_maskall macro to the Barebox lowlevel init. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018
	d34e863 Browse files » ARM: import opcode helpers from Linux kernel ... Those are needed to generate some of the ARM SEC and VIRT opcodes in a portable way. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Tested-by: Roland Hieber <r.hieber@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Lucas Stach authored on 1 Nov 2018 Sascha Hauer committed on 2 Nov 2018