of: unflatten: access property properly ...

Properties have to be accessed with of_property_get_value() rather than
accessing them directly from the devicenode. The accessor does the
right thing when of_new_property_const() is used.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usbgadget: autostart: add DFU support ...

Use global variable dfu_function to autostart DFU. As similar code
is used to start multifunction gadget using command, move common
code to common/usbgadget.c and consolidate it.
It turned out that '-s' option of usbgadget command does nothing,
so remove its help text and make it function as '-a'.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: set maxpacket_limit ...

Gadget update to 3.15 imported Linux patch e117e742d310 ("usb:
gadget: add "maxpacket_limit" field to struct usb_ep"):

  This patch adds "maxpacket_limit" to struct usb_ep. This field contains
  maximum value of maxpacket supported by driver, and is set in driver probe.
  This value should be used by autoconfig() function, because value of field
  "maxpacket" is set to value from endpoint descriptor when endpoint becomes
  enabled. So when autoconfig() function will be called again for this endpoint,
  "maxpacket" value will contain wMaxPacketSize from descriptior instead of
  maximum packet size for this endpoint.

  For this reason this patch adds new field "maxpacket_limit" which contains
  value of maximum packet size (which defines maximum endpoint capabilities).
  This value is used in ep_matches() function used by autoconfig().

  Value of "maxpacket_limit" should be set in UDC driver probe function, using
  usb_ep_set_maxpacket_limit() function, defined in gadget.h. This function
  set choosen value to both "maxpacket_limit" and "maxpacket" fields.

However said update didn't bring in all driver changes. Do it now.

Fixes: 2776d53d7ac8 ("USB: gadget: Update to 3.15")
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: fsl_udc: pass controller instance to unregister ...

ci_udc_unregister() used to unregister "the controller". Since we
may register multiple chipidea devices we called ci_udc_unregister()
for each of them. This led to messages like:

ERROR: imx-usb 53f80000.usb: gadget not registered.

Fix this by returning the registered controller. This allows us to call
ci_udc_unregister() only when we actually registered one before.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: imx: unregister ehci controller on device removal ...

ehci does DMA and hence must be properly quiesced before we leave
barebox. Call ehci_unregister() on device removal when we previously
registered a ehci controller.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: ehci-atmel: unregister host on device remove ...

The ehci code does DMA and really must be properly stopped when we
leave barebox, so call ehci_unregister on device removal.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: ehci: do not use dev->priv ...

An ehci can be registered with ehci_register which is passed a struct
device_d *. In that case the priv pointer may already be used by the
caller, so we must not use it in the ehci code. At least for the Atmel
ehci driver this fixes a bug, here dev->priv is set two times to
different values.
Since we need dev->priv in the ehci code to get the controller in
ehci_detect() we can no longer implement that without the help of the
caller, hence we eport ehci_detect() and epect it to be called by
the code which registers a ehci host.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: ehci: add ehci_unregister() ...

ehci_register() allocates data and registers a ehci host. Add
ehci_unregister() to properly halt the controller and to free the memory
again.. To do so, change ehci_register() to return the ehci host rather
than an error code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: base: Simplify dev_request_mem_region_err_null() ...

Simplify dev_request_mem_region_err_null() by making use of
dev_request_mem_resource() to implement it.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: base: Drop dev_get_mem_region_by_name() ...

Drop dev_get_mem_region_by_name() which doesn't seem to have any users
in the codebase.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: base: Simplify generic_memmap_ro() ...

Simplify generic_memmap_ro() by re-implementing it using
generic_memmap_rw().

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: Introduce gpio_find_by_label() ...

Introduce gpio_find_by_label() in order to allow manipulating GPIOs by
the labels assigned to them via DT or board/driver code.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: VF610: Propagate error code of gpiochip_add() up ...

Propagate error code of gpiochip_add() up the call chain. This won't
do any meaningful cleanup, but at least it will make problems
noticable.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

USB: gadget: prevent unnecessary warning message ...

The USB gadget autostart code issues a warning when no otg device
exists:

Cannot set parameter otg.mode: No such device

This is unnecessary since there may be no otg device at all, but only a
gadget device. Drop that warning by checking if there is a otg device
first.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: don't break long print messages ...

Linux commit 2ac63d901b11 adapted for Barebox:

  ...However, never break user-visible strings such as printk
  messages, because that breaks the ability to grep for them.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: add accessors, macros for in-memory BBT ...

Linux commit 771c568bcf91:

  There is an abundance of magic numbers and complicated shifting/masking
  logic in the in-memory BBT code which makes the code unnecessary complex
  and hard to read.

  This patch adds macros to represent the 00b, 01b, 10b, and 11b
  memory-BBT magic numbers, as well as two accessor functions for reading
  and marking the memory-BBT bitfield for a given block.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: atmel_nand: replace printk with dev_info ...

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: Add usb_unregister_host() ...

We have usb_register_host() which puts a new host on the list
of hosts we should also have the opposite which removes the
host from the list again.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: host: ehci: rename ehci_priv to ehci_host ...

As we are going to export the structure as a cookie to others
rename it to ehci_host.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: gadget: fsl_udc: Drop using global variable ...

No need to use the global udc_controller variable when we are provided
an usb_gadget.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: mv88e6xxx: Add support for MAC ports ...

Add support for MAC-only/no-PHY ports by adding code that will create
a pseudo PHY device for such ports and a driver to match
against. Original Linux driver exposes all of the ports using DSA
subystem, but lacking that in Barebox, creating pseudo PHYs is the
simplest option to have code to properly configure various interface
parameters.

This is needed, for example, on ZII RPU2 board where FEC is connected
directly to one of the MAC-only ports. That link requires proper RGMII
delay configuration in order to be functional.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: mv88e6xxx: Port EEPROM support code ...

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: phy: Add basic driver for MV88E6XXX switches from Marvell ...

Port a very abridged version of MV88E6XXX DSA driver from Linux
kernel. Currently only internal MDIO bus connected to switch PHYs is
exposed.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mdio_bus: Allow for non PHY-devices on MDIO buses ...

Instead of just creating a simple PHY device for every child of MDIO
bus node, add code to check if any of them have "compatible" property
set, as well as code to create a proper platform device for such
cases.

This change is useful for when MDIO bus and some of Ethernet ports are
connected to a switch or some other MDIO device that doesn't behave
like a generic PHY and can't be probed via its PHY ID.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nvmem: i.MX ocotp: Make locally used functions static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb: ulpi: Make locally used functions static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: clk: imx5: Make locally used functions static ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pinctrl: tree-wide probe devices during core_initcall ...

Since commit 37e6bee7e5 ("gpiolib: Add support for GPIO "hog" nodes")
barebox can handle hog-gpios. To work correctly the pinctrl driver
must be initialised first. Reorder all pinctrl drivers so they will be
called first.

find drivers/pinctrl/ -type f -name *.c \
	-exec sed -i 's/\bpostcore_initcall\b/core_initcall/' "{}" +;

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: tree-wide don't probe devices during core_initcall ...

Since commit 37e6bee7e5 ("gpiolib: Add support for GPIO "hog" nodes")
barebox can handle hog-gpios. To work correctly the pinctrl driver
must be initialised first. Reorder all core_initcall's so the pinctrl
driver can be called first.

find drivers/gpio/ -type f -name gpio-*.c -exec sed -i \
	's/core_initcall/postcore_initcall/' "{}" +;

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpiolib: fix of_hog_gpio gpio label assignment ...

Current the label is retrieved by the line-name property but this is a
optional property. In case of a missing line-name property the label is
NULL. As the binding documentation told, the gpio-label must be set to
the device-node name in case of missing line-name property.

Fixes: 37e6bee7e5 ("gpiolib: Add support for GPIO "hog" nodes")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>