LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / board

2009-12-03	0daeaf4 Browse files » i.MX35 3stack: update environemnt to support jffs and ubi/ubifs ... ubifs is default Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 3 Dec 2009
	2134ed1 Browse files » PCA100: initialize pll in assembler code ... The PLL initialisation does not work properly if run from SDRAM. Move the initialisation code to lowlevel init which is run in NFC RAM. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
	0a81b60 Browse files » i.MX35 3stack: several enhancements ... - Add support for booting from NAND - Add support for internal Boot mode - Add I2C PMIC support - Enable FEC Ethernet controller Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 12 Nov 2009 Sascha Hauer committed on 3 Dec 2009
	0e0addd Browse files » Eukrea CPUIMX27 : update documentation ... Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 22 Oct 2009 Sascha Hauer committed on 3 Dec 2009
	4b3e650 Browse files » Eukrea CPUIMX27 : Add MMU support ... Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 22 Oct 2009 Sascha Hauer committed on 3 Dec 2009
	2adeb59 Browse files » Eukrea CPUIMX27 : add console on Quad UART support ... The SOM can integrate a 16550 Quad UART which can be used for serial console. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 22 Oct 2009 Sascha Hauer committed on 3 Dec 2009
	c24fa6b Browse files » Eukrea CPUIMX27 : add NOR flash size configuration ... 64MB strataflash consist in 2x256Mb flashs. So we must declare 2 cfi_flash in order to have both 256Mb flash geometry properly detected. For flash <= 32 MB we prefer not to register the second cfi_flash which would be an alias of the first one. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 22 Oct 2009 Sascha Hauer committed on 3 Dec 2009
	bf33c69 Browse files » Eukrea CPUIMX27 : add SDRAM size choice ... Add a menu entry and proper settings for 128MB and 256MB RAM size. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 22 Oct 2009 Sascha Hauer committed on 3 Dec 2009
	28948a4 Browse files » at91sam9260ek: Reset ethernet phy during init ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
2009-11-24	f247d3b Browse files » mx25-3stack, pcm043: use IMX_FEC_BASE define ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 24 Nov 2009
2009-11-02	e89a462 Browse files » arm/kconfig: inverse the board selection ... instead of select first the board which will select the arch, now first choice the arch to filter the possible boards as it's already done for omap Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 31 Oct 2009 Sascha Hauer committed on 2 Nov 2009
	af88bac Browse files » at91: add support for the at91sam9263ek board of Atmel ... Here is the page on Atmel website: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com> Cc: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 28 Oct 2009 Sascha Hauer committed on 2 Nov 2009
	2e09253 Browse files » pm9263: add nand support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Ilko Iliev <iliev@ronetix.at> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 30 Oct 2009 Sascha Hauer committed on 2 Nov 2009
2009-10-28	cd28862 Browse files » a9m2410dev: compile fixes ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Oct 2009
	40a5f3d Browse files » Merge branch 'for-sascha' of git://uboot.jcrosoft.org/u-boot-v2 into from-jean ... Conflicts: board/a9m2440/a9m2440.c board/pcm043/pcm043.c drivers/nand/nand_imx.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 28 Oct 2009
	5b28d03 Browse files » A9M2440: Addapting the default environment ... Adapting the default environment to support booting from network and NAND Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Juergen Beisert authored on 27 Oct 2009 Sascha Hauer committed on 28 Oct 2009
	f5194c3 Browse files » A9M2440: Be able to configure things baseboard dependent ... There is no really generic way to configure the S3C2440 CPU with fits to all possible baseboards. This patch separates things into the CPU card related and baseboard related things. This ensures to be able to configure things for each possible baseboard without modifying/patching the main card source. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Juergen Beisert authored on 27 Oct 2009 Sascha Hauer committed on 28 Oct 2009
	8a7f837 Browse files » A9M2440: Use external GPIO settings to setup the SDRAM ... The generic A9M2440 comes in many SDRAM variantes. Two GPIO pins describing the populated SDRAM devices. This patch adds some code to query the setting and setup a correct SDRAM configuration out of four possible variants. Due to the lack of hardware the 16 MiB and 128 MiB case is untested yet. Due to the 32 MiB configuration we must link the u-boot-v2 always to address 0x31fc0000. Even for the 64 MiB and 128 MiB configuration. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Juergen Beisert authored on 27 Oct 2009 Sascha Hauer committed on 28 Oct 2009
	07d6c14 Browse files » A9M2440: Generic code should support generic hardware ... The generic A9M2440 comes with a CS8900 network controller at chip select 5. There are custom specific variants available without this device, but this case will be handled in a separate baseboard file. The current Linux-2.6.31 CS8900 network driver is a very poor piece of code. It needs some patches to also work with this platform. So, I add two kernel parameters to be able to use this network device also in the NFS rootfs case (to setup media and MAC). Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Juergen Beisert authored on 27 Oct 2009 Sascha Hauer committed on 28 Oct 2009
	b1d8803 Browse files » A9M2440: Fix documentation ... The generic A9M2440 comes in many variantes. Mostly with different SDRAM and NAND populations. This patch reflects and describes these variants. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Juergen Beisert authored on 27 Oct 2009 Sascha Hauer committed on 28 Oct 2009
	16fe431 Browse files » A9M2440: Just clean up ... Just clean up whitespaces. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Juergen Beisert authored on 27 Oct 2009 Sascha Hauer committed on 28 Oct 2009
2009-10-26	f0b87db Browse files » Adapt pcm043 platform to boot from NAND ... Adapt the pcm043 plattform to be able to boot from NOR and NAND Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 23 Oct 2009 Sascha Hauer committed on 26 Oct 2009
	a30b9d4 Browse files » IMX_NAND_BASE -> IMX_NFC_BASE ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Oct 2009
	011f6dc Browse files » mxc_nand: determine page and block size depending on NFMS bit ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Oct 2009
2009-10-23	8b05f75 Browse files » imx-nand : remove wrong part of commit `ca326e8` ... previous fix for 2k pages was wrong so remove it Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 22 Oct 2009 Sascha Hauer committed on 23 Oct 2009
2009-10-22	daad436 Browse files » [M68K] Move include/asm-m68k/{arch,proc}-* to arch/m68k/*/include/{mach,proc} ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 22 Oct 2009
	e988d5d Browse files » [PPC] Move include/asm-ppc/arch-* to arch/ppc/*/include/mach ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 22 Oct 2009
	b452168 Browse files » [SANDBOX] Move include/asm-sandbox/arch-* to arch/sandbox/*/include/mach ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 22 Oct 2009
	f6a579d Browse files » [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 22 Oct 2009
2009-10-21	6647b58 Browse files » CPUIMX27 : update dram declaration ... Boot on this board was broken following ram updates in u-boot Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 20 Oct 2009 Sascha Hauer committed on 21 Oct 2009