LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2009-12-21	cbba91e Browse files » MTD: Correct typo in preprocessor directive. ... Configuration directive should obviously start with "CONFIG_". Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert P. J. Day authored on 21 Dec 2009 Sascha Hauer committed on 21 Dec 2009
2009-12-21	9edcbdc Browse files » NAND: Free asprintf()-allocated space upon mtd device deletion. ... Given that add_mtd_device() invokes asprintf() thusly: mtd->cdev.name = asprintf("nand%d", mtd->class_dev.id); ... mtd->param_size.value = asprintf("%u", mtd->size); ... mtd->cdev_oob.name = asprintf("nand_oob%d", mtd->class_dev.id); make sure del_mtd_device() frees that in the reverse order. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert P. J. Day authored on 21 Dec 2009 Sascha Hauer committed on 21 Dec 2009
2009-12-18	4c96c0e Browse files » i.MX nand: mx21 has a v1 type controller ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 Dec 2009
2009-12-15	ca8ec6c Browse files » Cleanup some more collateral damage from renaming ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 15 Dec 2009
	dac84c7 Browse files » documentation updates ... Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 15 Dec 2009 Sascha Hauer committed on 15 Dec 2009
	9491ec7 Browse files » Cleanup colleteral damage from renaming ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Dec 2009
	a3ffa97 Browse files » rename U-Boot-v2 project to barebox ... This has been done with the following script: find -path ./.git -prune -o -type f -print0 \| xargs -0 -r sed -i \ -e 's/u2boot/barebox/g' \ -e 's/U2Boot/barebox/g' \ -e 's/U-boot V2/barebox/g' \ -e 's/u-boot v2/barebox/g' \ -e 's/U-Boot V2/barebox/g' \ -e 's/U-Boot-v2/barebox/g' \ -e 's/U_BOOT/BAREBOX/g' \ -e 's/UBOOT/BAREBOX/g' \ -e 's/uboot/barebox/g' \ -e 's/u-boot/barebox/g' \ -e 's/u_boot/barebox/g' \ -e 's/U-Boot/barebox/g' \ -e 's/U-boot/barebox/g' \ -e 's/U-BOOT/barebox/g' find -path ./.git -prune -o \( -name "u-boot" -o -name "uboot" -o -name "u_boot" \) -print0 \| \ xargs -0 -r rename 's/u[-_]?boot/barebox/' It needs some manual fixup following in the next patch Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Dec 2009
2009-12-10	c5d512e Browse files » Merge branch 'for-sha-i2c-imx' of git://git.pengutronix.de/git/mkl/u-boot-v2 Sascha Hauer committed on 10 Dec 2009
2009-12-09	4f24fe1 Browse files » fb: Add a i.MX IPU framebuffer driver ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen nogit Beisert authored on 7 Dec 2009 Sascha Hauer committed on 9 Dec 2009
	ce09de5 Browse files » imxfb: show only for relevant i.MXs ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 9 Dec 2009
	59be902 Browse files » nand_imx.c : remove unused code ... Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 9 Dec 2009 Sascha Hauer committed on 9 Dec 2009
	68176ca Browse files » nand_imx.c : add reset command ... The RESET command was removed during the nand_imx.c driver rework. The reset commant is necessary in order to get Micron Nand running as they need a RESET command before being able to get any command. Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 9 Dec 2009 Sascha Hauer committed on 9 Dec 2009
	f3e7145 Browse files » i2c-imx: i2c_imx_xfer return with err if sub-transfer isn't successfull ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 9 Dec 2009
	4fe3391 Browse files » i2c-imx: fix low bitrate problem ... loop in i2c_imx_acked() in low bit rates it takes some time until the ACK comes in. Also add a delay before polling for bus not busy in i2c_imx_read. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 9 Dec 2009
	6d34576 Browse files » i2c-imx: fix clear IFF race condition ... During i2c read the original pattern was: 1. write i2c slave address 2. wait for transmit complete + clear IIF 3. wait for receive acknowledge 4. wait for IIF interrupt Due to the clear of the I2SR register, the IIF flag was cleared, too. So in step 4 the Interrupt wasn't detected. To fix this problem, we move the clean of IIF before the writing of the slave address. So that it looks this way: 0. clear IIF 1. write i2c slave address 2. wait for transmit complete 3. wait for receive acknowledge 4. wait for IIF interrupt Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 9 Dec 2009
	ed85e6d Browse files » i2c-imx: print errors with dev_err ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 9 Dec 2009
2009-12-03	d177626 Browse files » nand: do not write empty pages. Needed for writing UBI images ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
	2c84734 Browse files » nand: refuse to write data if not beginning on a page boundary ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
	c6f639f Browse files » NAND: Allow to read oob data ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
	13d2d38 Browse files » i.MX: remove obsolete V2 Nand driver ... Use the generic v1 driver instead Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
	6986aa0 Browse files » i.MX Nand: Set correct datawidth/pagesize in CCM module ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Dec 2009
	ce96b9c Browse files » mc9sdz60: driver added ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde authored on 23 Nov 2009 Sascha Hauer committed on 3 Dec 2009
	635dd44 Browse files » mc13892: driver added ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde authored on 23 Nov 2009 Sascha Hauer committed on 3 Dec 2009
	eff9f87 Browse files » i2c-imx: ported to u-boot-v2 ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde authored on 16 Nov 2009 Sascha Hauer committed on 3 Dec 2009
	0d87082 Browse files » i2c: new framework ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde authored on 21 Nov 2009 Sascha Hauer committed on 3 Dec 2009
2009-11-27	39cc3a5 Browse files » Unify driver's menu also for video ... Make the video drivers menu the same like NAND and USB Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 25 Nov 2009 Sascha Hauer committed on 27 Nov 2009
2009-11-24	7ee5aa3 Browse files » spi: dev->id is an int, not a string, fix debug output ... Also convert __FUNCTION__ -> __func__ Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 24 Nov 2009
2009-11-23	a4b3743 Browse files » nand: print size parameter as unsinged not as signed ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 23 Nov 2009
2009-11-21	c985ea0 Browse files » fec_imx: remove trailing whitespace ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 21 Nov 2009
2009-11-03	7aa3778 Browse files » arm: add Debug Communications Channel serial driver support ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 2 Nov 2009 Sascha Hauer committed on 3 Nov 2009