LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2010-03-31	0b54f2c Browse files » nand_imx: clear INT_MSK to fix i.MX21 nand boot ... For some weird reason this fixes nand boot on i.MX21. Since interrupts are globally disabled it doesn't hurt on other SoCs. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 31 Mar 2010
2010-03-18	c6f4ea0 Browse files » Make some help comments less confusing ... Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 17 Mar 2010 Sascha Hauer committed on 18 Mar 2010
2010-02-18	7736782 Browse files » Merge branch 'nor' into next Sascha Hauer committed on 18 Feb 2010
2010-02-16	1568957 Browse files » drivers/video/Makefile: cleanup proper indention ... Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 16 Feb 2010
2010-02-12	2e6eb64 Browse files » Fix compile time errors when DEBUG is defined ... If the DEBUG macro is defined the compiler complains about a missing 'ipu_base' variable. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 11 Feb 2010 Sascha Hauer committed on 12 Feb 2010
2010-02-08	e6b8bdc Browse files » cfi_flash: move include/cfi_flash.c next to driver ... This file has no useful things for others than the driver, so move it next to the driver and remove the corresponding include from other files. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	582da05 Browse files » cfi_flash: remove old driver and switch to new one ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	8b82899 Browse files » cfi_flash_new: make code more readable, return is not a function ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	0890662 Browse files » cfi_flash_new: generate flash erase dots in common function ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	146ba46 Browse files » cfi_flash_new: Safe indention level by bailing out earlier in error case ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
	4e459d9 Browse files » cfi_flash_new: Fix Intel chips ... There was some mixup when to to a full status check and when to do a status check only. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 8 Feb 2010
2010-02-03	e1e9fc4 Browse files » ep93xx eth driver: dump_xxx() cleanup ... ep93xx eth driver dump_xxx() functions: Use %p to print pointer values, remove unnecessary parentheses and declare as static Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 2 Feb 2010 Sascha Hauer committed on 3 Feb 2010
2010-02-03	7f9bde6 Browse files » ep93xx eth driver: Remove unnecessary parentheses in constant definitions ... ep93xx eth driver: Remove unnecessary parentheses in definition of the constants MII_ADDRESS_MAX and MII_REGISTER_MAX Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 2 Feb 2010 Sascha Hauer committed on 3 Feb 2010
2010-02-02	e1cd82c Browse files » ep93xx eth driver: Reorder functions to eliminate need for prototypes ... ep93xx eth driver: Define ep93xx_eth_send_packet() and ep93xx_eth_rcv_packet() before ep93xx_eth_probe(), and eliminate their prototype declarations Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 1 Feb 2010 Sascha Hauer committed on 2 Feb 2010
2010-02-02	0e46c26 Browse files » ep93xx eth driver: Fix dump_xxx_queue() parameter list ... ep93xx eth driver: Add missing parameter to dump_rx_status_queue(), dump_tx_descriptor_queue() and dump_tx_status_queue() Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 1 Feb 2010 Sascha Hauer committed on 2 Feb 2010
2010-02-01	6cbf70a Browse files » Merge branch 'pu' Sascha Hauer committed on 1 Feb 2010
	922bb41 Browse files » remove typedef cmd_tbl_t and replace it with struct command ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 1 Feb 2010
	1e65863 Browse files » cfi_flash: fix alignment problem ... This patch fixes a alignment problem which may show during this scenario: - 32 or 64 attached NOR flash - flashing an image directly from network to the nor flash The involved network driver is "smc9111.c". The data that comes from the network stack and should be written into the flash isn't 32 bit alligned (at least with this network driver). This is probably due to the 48 bit wide ethernet addresses. However the "cfi_flash.c" driver doesn't handle this situation, and accesses the not-alligned address with a 32 bit pointer. This patch fixes the problem by reducing the access width if an alligment problem between source and destination is found. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
	4903636 Browse files » smc91111: fix odering of mac address read from EEPROM ... On my little endian PXA270, the ethernet address is byte swapped: correct ethernet address: 00:50:c2:80:a7:bd broken ethernet address: 50:00:80:c2:bd:a7 The correct value is what the sticker on the baoard and the linux driver says. This patch fixes the problem by reading the ethaddr byte-wise from the eeprom. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Kleine-Budde authored on 1 Feb 2010 Sascha Hauer committed on 1 Feb 2010
	7ca411e Browse files » Merge branch 'next' Sascha Hauer committed on 1 Feb 2010
2010-01-29	512a1c8 Browse files » Fix nand_imx for i.MX21 ... Recent changes to the nand_imx driver broke it for i.MX21 systems; the i.MX21 NAND controller is more akin to the one in i.MX27/i.MX31, than to the one in i.MX25/i.MX35. Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Ivo Clarysse authored on 28 Jan 2010 Sascha Hauer committed on 29 Jan 2010
2010-01-19	976b4be Browse files » Merge branch 'for-sha-mx35-3-stack-updates' of ssh://git.pengutronix.de/git/mkl/barebox into next Sascha Hauer committed on 19 Jan 2010
2010-01-18	23f4449 Browse files » mc13892: clean up driver interface ... Export mc13892_reg_read, mc13892_reg_write and mc13892_set_bits function instead of exposing the i2c interface. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
2010-01-18	fc268d5 Browse files » mc9sdz60: clean up driver interface ... Export mc9sdz60_reg_read, mc9sdz60_reg_write and mc9sdz60_set_bits function instead of exposing the i2c interface. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Marc Kleine-Budde committed on 18 Jan 2010
2010-01-16	f8dc81b Browse files » I2C : add NS LP3972 PMIC support ... Signed-off-by: Eric Benard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Benard authored on 15 Jan 2010 Sascha Hauer committed on 16 Jan 2010
2010-01-14	835aa6b Browse files » Add a low level disk drive access driver ... This is a low level disk drive communication driver. It uses the real mode BIOS found on most x86 platforms, to read and write sectors. Used by the generic disk driver. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 12 Jan 2010 Sascha Hauer committed on 14 Jan 2010
	bb0d24d Browse files » Add the main disk driver ... This is the generic disk driver. It does not know how to access the drives. Other low level drivers are required for this. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 12 Jan 2010 Sascha Hauer committed on 14 Jan 2010
	2264ac8 Browse files » Start to add ATA support to barebox ... Add the basic files, declarations and folders to bring in ATA support. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 12 Jan 2010 Sascha Hauer committed on 14 Jan 2010
	f13033d Browse files » Add PrimeCell PL010 serial driver ... Added driver for ARM PrimeCell PL010 UART Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 12 Jan 2010 Sascha Hauer committed on 14 Jan 2010
	6f4ed95 Browse files » Add EP93xx ethernet driver ... Added ethernet driver for EP93xx SoCs Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Matthias Kaehlcke authored on 12 Jan 2010 Sascha Hauer committed on 14 Jan 2010