LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2010-10-25	bc12511 Browse files » epautoconf: fix compile error ... this patch fix the following error : CC drivers/usb/gadget/epautoconf.o drivers/usb/gadget/epautoconf.c:33: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'unsigned' drivers/usb/gadget/epautoconf.c: In function 'ep_matches': drivers/usb/gadget/epautoconf.c:168: error: 'epnum' undeclared (first use in this function) drivers/usb/gadget/epautoconf.c:168: error: (Each undeclared identifier is reported only once drivers/usb/gadget/epautoconf.c:168: error: for each function it appears in.) drivers/usb/gadget/epautoconf.c: In function 'usb_ep_autoconfig_reset': drivers/usb/gadget/epautoconf.c:304: error: 'epnum' undeclared (first use in this function) Signed-off-by: Eric Bénard <eric@eukrea.com> Eric Bénard authored on 14 Oct 2010 Sascha Hauer committed on 25 Oct 2010
2010-10-01	b82ee74 Browse files » i2c-imx: wait for STOP before disabling controller ... Makes sure that the STOP condition is transmitted before the I2C controller is disabled. This fixes a problem where writing to an external EEPROM was not working because the EEPROM waits until the STOP before initiating the write internally. Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Marc Reilly authored on 1 Oct 2010 Sascha Hauer committed on 1 Oct 2010
2010-09-27	a19d780 Browse files » imx-ipu-fb: set default bits per pixel at 16 for mx3 ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 24 Sep 2010 Sascha Hauer committed on 27 Sep 2010
2010-09-20	8eea335 Browse files » netx eth: Fix compilation ... Also, replace __FUNCTION__ with __func__ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Sep 2010
	a645fe3 Browse files » ep93xx net driver: Fix compilation ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Sep 2010
	e4c138e Browse files » fec_mpc5200: Fix compilation ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Sep 2010
	1b2f03e Browse files » twl4030: Fix compiler warnings ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Sep 2010
	e85c6bb Browse files » driver: use id as -1 for auto assigned id ... before if you specify id = 0 the next available id will be taken otherwise fail if already registered now as in linux we use -1 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 17 Sep 2010 Sascha Hauer committed on 20 Sep 2010
	6a0ce69 Browse files » i2c: move busses to drivers/i2c/busses ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 13 Sep 2010 Sascha Hauer committed on 20 Sep 2010
	6186a85 Browse files » arm: move clkdev to drivers/clk ... as refer in this patch "arm & sh: factorised duplicated clkdev.c" factorise some generic infrastructure to assist looking up struct clks for the ARM & SH architecture. as the code is identical at 99% in linux move it also as preparing for the SH adding Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 30 Aug 2010 Sascha Hauer committed on 20 Sep 2010
	3c60566 Browse files » amba-pl011: probe fail if we can't get the clock ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD authored on 12 Sep 2010 Sascha Hauer committed on 20 Sep 2010
2010-09-16	44597cd Browse files » i2c rename CONFIG_DRIVER_I2C_xx to CONFIG_I2C_xx ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 16 Sep 2010
2010-09-16	cf6d0d0 Browse files » i2c: fix wrong comment and symbol export for i2c_add_numbered_adapter() ... Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Wolfram Sang authored on 31 Aug 2010 Sascha Hauer committed on 16 Sep 2010
2010-08-30	eaa223e Browse files » module: move EXPORT_SYMBOL_GPL define to module.h ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 29 Aug 2010 Sascha Hauer committed on 30 Aug 2010
2010-08-27	12f396a Browse files » net: rework the mii support ... this rework is done in order to add a phylib and allow to have phy driver support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 26 Aug 2010 Sascha Hauer committed on 27 Aug 2010
2010-08-22	086f96b Browse files » macb: introduce HAS_MACB configuration ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 22 Aug 2010
2010-08-22	54d6627 Browse files » dm9000: allow to specify that no srom is present ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 22 Aug 2010
2010-08-18	0d8d93d Browse files » omap: nand remove unnecessary condition ... Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 17 Aug 2010 Sascha Hauer committed on 18 Aug 2010
2010-08-17	9965f8f Browse files » fec_imx: add support for IIM stored mac address ... The mac address information is taken from the imx_iim driver if it's present. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Baruch Siach authored on 16 Aug 2010 Sascha Hauer committed on 17 Aug 2010
2010-08-06	6937c91 Browse files » omap nand: bugfix configure ecc order ... This repairs a bug which came with patch "0cb00c1 omap nand: cleanup" We first have to set ecc.layout before we can use it and should do the nand_scan_tail after we set the ecc.mode. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 6 Aug 2010 Sascha Hauer committed on 6 Aug 2010
	e503c22 Browse files » ehci: add omap support ... with cm-regbits-34xx.h and codebase from linux kernel Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 4 Aug 2010 Sascha Hauer committed on 6 Aug 2010
	f1329a1 Browse files » usb: add twl4030 phy support ... Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Michael Grzeschik authored on 4 Aug 2010 Sascha Hauer committed on 6 Aug 2010
	b0e989f Browse files » ehci: add remove function ... and stop the ehci controller before the kernel is trying to restart it. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Michael Grzeschik authored on 4 Aug 2010 Sascha Hauer committed on 6 Aug 2010
	ac8066a Browse files » ehci: set CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS to 16 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Sascha Hauer committed on 6 Aug 2010
	50c7d68 Browse files » ehci: Make has_tt configurable via platform data ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Sascha Hauer committed on 6 Aug 2010
	83934e3 Browse files » add twl4030 support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Sascha Hauer committed on 6 Aug 2010
	a992be9 Browse files » arm omap: Add I2C driver ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Sascha Hauer committed on 6 Aug 2010
	7192259 Browse files » nand: driver for Nomadik 8815 SoC ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Andrea GALLO <andrea.gallo@stericsson.com> Cc: Gael SALLES <gael.salles@stericsson.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Aug 2010 Sascha Hauer committed on 6 Aug 2010
	907d7cb Browse files » amba: add pl011 ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Andrea GALLO <andrea.gallo@stericsson.com> Cc: Gael SALLES <gael.salles@stericsson.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Aug 2010 Sascha Hauer committed on 6 Aug 2010
	8739100 Browse files » at91: implement clock framework ... this implementation is based on linux one (v2.6.35-rc5-76-gd0c6f62) it will calculate all the clock dynamically instead of statictly this will use also the new clock framework it will also print the clock status after the console init Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Aug 2010 Sascha Hauer committed on 6 Aug 2010