LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2011-03-18	79c7801 Browse files » mtd/nand_imx: fix read past buffer end ... Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Baruch Siach authored on 17 Mar 2011 Sascha Hauer committed on 18 Mar 2011
2011-03-10	df850da Browse files » mfd/mc13892: Add missing semicolons ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 10 Mar 2011
2011-03-10	3b48591 Browse files » x86 ATA: Don't touch the size entry for the BIOS disk based device ... Only the platform sets this entry to setup the correct size or signals the driver to guess the size of the attached disk. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Juergen Beisert authored on 21 Dec 2010 Sascha Hauer committed on 10 Mar 2011
2011-03-03	5fb8333 Browse files » ARM i.MX: cleanup boot modes ... The i.MX Processors support two different boot modes, the internal boot mode and the external boot mode. Traditionally the external NAND boot mode is handled in drivers/mtd/nand and the internal boot mode is handled in arch/arm/mach-imx. This patch consolidates the handling of both boot modes in arch/arm/mach-imx so that the user does not have to look in the mtd kconfig section for booting from NAND. Also, selecting between internal and external boot mode now is a clear choice. The external NAND boot mode has been independent of the mtd nand driver, but as the code was contained in the NAND driver it was not possible to support booting from NAND without a mtd nand driver. This is changed with this patch. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 3 Mar 2011
	a0c1644 Browse files » dm9000: read the mac address from the register if none are specified ... as barebox can be run as a second stage the first stage may have init it before so re-used it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 23 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	1f16755 Browse files » Fix end of expression char (some lines forgotten in v1) ... Its not a bug fix, just a clean up. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 17 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	4f72931 Browse files » Fix end of expression char ... Its not a bug fix, just a clean up. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 17 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	e5902f6 Browse files » MACH-S3C2440: Speed up NAND controller for this CPU ... The S3C2440 provides 32 bit access to the NAND's data. Add specific read routines to speed up data reading and writing. These routines are stolen from the Linux kernel. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	c3f4e1d Browse files » MACH-S3C2440: Fix NAND controller for this CPU ... There are a few but important differences in S3C2410 and S3C2440. This patch fixes them for the S3C2440 CPU. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
	073f39c Browse files » MACH-S3C24XX: Add support for flash based BBT ... The default configuration of the current 2.6.37 kernel uses a flash based BBT. So, barebox must also use one, to be in sync with the kernel about bad blocks in the flash. Due to the used OOB layout, the generic BBT description coming with the framework can be used. Signed-off-by: Juergen Beisert <juergen@kreuzholzen.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 16 Feb 2011 Sascha Hauer committed on 3 Mar 2011
2011-02-10	90613cd Browse files » tx28: fix kconfig warning ... Without this patch (against next) I get this: rsc@thebe:barebox$ make ARCH=arm CROSS_COMPILE=<path>/arm-v5te-linux-gnueabi- menuconfig HOSTCC scripts/kconfig/lxdialog/checklist.o HOSTCC scripts/kconfig/lxdialog/inputbox.o HOSTCC scripts/kconfig/lxdialog/menubox.o HOSTCC scripts/kconfig/lxdialog/textbox.o HOSTCC scripts/kconfig/lxdialog/util.o HOSTCC scripts/kconfig/lxdialog/yesno.o HOSTCC scripts/kconfig/mconf.o HOSTLD scripts/kconfig/mconf scripts/kconfig/mconf Kconfig warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX) warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX) Add the option for the FEC on MX28 as well. Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Robert Schwebel authored on 9 Feb 2011 Sascha Hauer committed on 10 Feb 2011
2011-02-07	dd18f45 Browse files » fb: For multiple video modes print the available modes in devinfo ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 7 Feb 2011
2011-02-03	06ea6c1 Browse files » Merge branch 'next' Sascha Hauer committed on 3 Feb 2011
2011-01-21	286117d Browse files » fb i.MX23/28: Add the reset control of LCD ... Video controller of STM allow to control the reset bit of an external LCD controller. When reset_lcd is set, CTRL1_RESET bit is used to enable and disable LCD. Handle USE_LCD_RESET as a flag in imx_fb_platformdata. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Gregory CLEMENT authored on 21 Jan 2011 Sascha Hauer committed on 21 Jan 2011
2011-01-21	bd56e41 Browse files » ARM STM/i.MX: Add possibility to choose the bit per pixel for STM video driver ... When describing an new video interface, it is now possible to select the bit per pixel. If nothing is chosen 16bpp is selected by default. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Gregory CLEMENT authored on 4 Jan 2011 Sascha Hauer committed on 21 Jan 2011
2011-01-20	e88d86a Browse files » ARM: rename STM arch to mxs ... We never supported the sigmatel stm chips and probably never will. So do the first step and rename the architecture to mxs just like in the kernel. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2011
	ca2cae2 Browse files » fb i.MX23/28: rename imx_fb_videomode to imx_fb_platformdata ... It's not a video mode, it contains video modes, so rename the struct to what it actually is. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2011
	8e61335 Browse files » fb i.MX23/28: add platform data hook to enable backlight ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2011
	203a5fd Browse files » USB ehci: Set to host mode on tt capable controllers ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 Jan 2011
2011-01-19	2f39e06 Browse files » miidev: allow read/write of all registers ... Ethernet PHY devices have 32 registers, each 16 bits wide. Thus, the size of the phy device should be 64 bytes. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Baruch Siach authored on 18 Jan 2011 Sascha Hauer committed on 19 Jan 2011
	cd735df Browse files » video stm/mx2x: allow to pass in fb memory from platform data ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2011
	7b2e36e Browse files » video stm/mx2x: simplify memory allocation ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2011
	4fb2d9c Browse files » fb: When setting a mode, also update xres, yres and fb size ... Also, set size to 0 when setting up the framebuffer failed so that the user cannot write to uninitialized framebuffer memory. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Jan 2011
2011-01-17	2f0109b Browse files » Merge branch 'master' into next Sascha Hauer committed on 17 Jan 2011
	06b7cc4 Browse files » fec i.MX28: Make it work with MMU on ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Jan 2011
	d0e7fac Browse files » Merge branch 'fb-master' Sascha Hauer committed on 17 Jan 2011
	04e89d0 Browse files » CFI NOR flash: fix write timeout units. ... Write timeouts are expressed in microseconds. Milliseconds are 1000 times longer than microseconds, not 1000 times shorter. Before (Intel 28F128J3D75): CFI conformant FLASH (16 x 16) Size: 16 MB in 128 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x18 Erase timeout: 4096 ms, write timeout: 256000 ms Buffer write timeout: 1024000 ms, buffer size: 32 bytes After: ... Erase timeout: 4096 ms, write timeout: 256 us Buffer write timeout: 1024 us, buffer size: 32 bytes Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Krzysztof Halasa authored on 16 Jan 2011 Sascha Hauer committed on 17 Jan 2011
2011-01-14	0327e12 Browse files » fb: update cdev map_base ... Calling fb_activate_var potentially changes the framebuffer address, so we have to update the fb0 cdev afterwards. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 14 Jan 2011
2011-01-14	2f07c8f Browse files » i2c-imx: sync with kernel's driver ... strange behaviour was observed with actual driver : bus lock, probe of absent adresses, wrong data read. This patch sync the driver with linux's one and after a few tests, we don't see anymore strange behaviour (tested on i.MX27). Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 12 Jan 2011 Sascha Hauer committed on 14 Jan 2011
2011-01-08	8a97bb9 Browse files » Merge branch 'scb9328' into next Sascha Hauer committed on 8 Jan 2011