LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2011-07-17	f4f952f Browse files » serial_ns16550: remove legacy code copied from U-Boot v1 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 16 Jul 2011 Sascha Hauer committed on 17 Jul 2011
2011-07-06	07b2cff Browse files » spi: unregister dev if master->setup fails ... If the device setup executed by the spi master fails, unregister the created device. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 5 Jul 2011 Sascha Hauer committed on 6 Jul 2011
	4c35079 Browse files » spi: add bits_per_word to proxy structure ... During the creation of a new spi device, we need to have the possiblility to give the bits_per_word value to master->setup. As a matter of fact, spi master could check the spi device bits_per_word and compare this value against its capabilities. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 5 Jul 2011 Sascha Hauer committed on 6 Jul 2011
	e6c03f0 Browse files » Merge branch 'next' Sascha Hauer committed on 6 Jul 2011
2011-07-05	dee1f82 Browse files » twl4030: fix typo on EXPORT_SYMBOL twl4030_reg_read and twl4030_reg_write ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 5 Jul 2011 Sascha Hauer committed on 5 Jul 2011
2011-07-05	26daaaa Browse files » MCI imx-esdhc: Fix cache flush/inval for multi block support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 5 Jul 2011
2011-06-21	c034843 Browse files » atmel-mci: fix initialization of 8bit-bus-width-mode for at91sam9g45 ... When the bus_width was set to 8, then only one data-line has been initialized. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 21 Jun 2011 Sascha Hauer committed on 21 Jun 2011
	1ecd192 Browse files » atmel-mci: fix wrong pointer cast ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 21 Jun 2011 Sascha Hauer committed on 21 Jun 2011
	f568880 Browse files » eeprom: add at25 eeprom driver ... This commit adds support for most spi eeproms, such as the Atmel at25 models. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 20 Jun 2011 Sascha Hauer committed on 21 Jun 2011
	c0b9629 Browse files » spi: add more spi transfer functions ... This commit adds the following spi transfer functions: - spi_write - spi_read - spi_write_then_read - spi_w8r8 The code has been ported from the linux kernel. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 20 Jun 2011 Sascha Hauer committed on 21 Jun 2011
	76f46b5 Browse files » spi: add platform_data pointer to spi_board_info ... In the spi layer this pointer will be assigned to the platform_data pointer of the new spi device, thus it can be accessed in the drivers 'probe' handler. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 20 Jun 2011 Sascha Hauer committed on 21 Jun 2011
2011-06-20	c6abd61 Browse files » Merge branch 'master' into next Sascha Hauer committed on 20 Jun 2011
	82ccbb8 Browse files » Merge branch 'atmel-mci-support-3' of git://gitorious.org/hfe-repos/barebox into next Sascha Hauer committed on 20 Jun 2011
	cdc5783 Browse files » macb: add support for board specific get_ethaddr function ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 16 Jun 2011 Sascha Hauer committed on 20 Jun 2011
2011-06-16	6cf0212 Browse files » mci: add Atmel AT91 MCI driver ... The driver supports push and pull transfers. Tested on at91sam9m10 SoC. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Hubert Feurstein committed on 16 Jun 2011
2011-06-10	9d64e1f Browse files » Add Altera JTAG UART driver ... Add Altera JTAG UART driver I removed the CONFIG_ALTERA_JTAG_UART_BYPASS. Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck Jullien authored on 6 Jun 2011 Sascha Hauer committed on 10 Jun 2011
2011-06-10	42207a9 Browse files » Improved gpmc_nand driver to show the current eccmode. ... Now a 'devinfo gpmc_nand0' shows the current used eccmode instead of <NULL>. The function omap_gpmc_eccmode is now called by dev_set_param. Signed-off-by: Juergen Kilb <J.Kilb@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Kilb authored on 9 Jun 2011 Sascha Hauer committed on 10 Jun 2011
2011-06-06	6e27bfb Browse files » Merge branch 'next' Sascha Hauer committed on 6 Jun 2011
2011-06-01	d1c02cf Browse files » mci-core: add missing newline in debug message ... Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Hubert Feurstein authored on 31 May 2011 Sascha Hauer committed on 1 Jun 2011
2011-05-25	46e72ec Browse files » Always initialize oob_poi before writing OOB data ... The following patch came across the mtd mailing list today. I thinks its also valid for barebox (it handles a special corner case, but maybe it can hit us, too): In nand_do_write_ops() code it is possible for a caller to provide ops.oobbuf populated and ops.mode == MTD_OOB_AUTO, which currently means that the chip->oob_poi buffer isn't initialised to all 0xFF. The nand_fill_oob() method then carries out the task of copying the provided OOB data to oob_poi, but with MTD_OOB_AUTO it skips areas marked as unavailable by the layout struct, including the bad block marker bytes. An example of this causing issues is when the last OOB data read was from the start of a bad block where the markers are not 0xFF, and the caller wishes to write new OOB data at the beginning of another block. In this scenario the caller would provide OOB data, but nand_fill_oob() would skip the bad block marker bytes in oob_poi before copying the OOB data provided by the caller. This means that when the OOB data is written back to NAND, the block is inadvertently marked as bad without the caller knowing. This has been witnessed when using YAFFS2 where tags are stored in the OOB. This patch changes the code so that oob_poi is always initialised to 0xFF to make sure no left over data is inadvertently written back to OOB data. The comment above is for the linux kernel, but the same is valid for barebox and CPUs writing the OOB date controlled in software (like the Samsung S3C2440 does). Signed-off-by: Adam Thomson <adam.thomson@alcatel-lucent.com> Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 24 May 2011 Sascha Hauer committed on 25 May 2011
2011-05-19	2d88cc4 Browse files » Add support for Samsung S3C24x0 framebuffer. ... Heavily based on original Juergen Beisert's code. Signed-off-by: Alexey Galakhov <agalakhov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexey Galakhov authored on 18 May 2011 Sascha Hauer committed on 19 May 2011
2011-05-18	7f72417 Browse files » usb: make locally used functions static ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2011
2011-05-18	fa9d86d Browse files » usb ehci: fix wrong argument order for memset ... Also, make locally used function ehci_submit_root static. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 18 May 2011
2011-05-16	88210b2 Browse files » Fix compiler warning ... Fix incompatible pointer type warning. Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 15 May 2011 Sascha Hauer committed on 16 May 2011
2011-05-06	c1bcb05 Browse files » ata: guessing disk sizes is only needed on X86 ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 May 2011
	0f16a03 Browse files » mci: turn several pr_* statements into debug ... These are mostly useful for developers, so turn them off by default. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 May 2011
	3af51e9 Browse files » mci: shrink string footprint ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 May 2011
2011-05-02	3260e9e Browse files » Nios2: Add Altera TSE driver ... Add Altera Triple Speed Ethernet driver Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 11 Apr 2011 Sascha Hauer committed on 2 May 2011
2011-05-02	554d967 Browse files » Fix coding style in driver/net/Makefile ... Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Franck JULLIEN authored on 11 Apr 2011 Sascha Hauer committed on 2 May 2011
2011-04-20	c318b0f Browse files » ARM: omap4: fix dev_width for omap_enable_hwecc ... NAND_BUSWIDTH_16 should result in dev_width = 1 according to the kernel driver omap_enable_hwecc: dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0; Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jan Weitzel authored on 19 Apr 2011 Sascha Hauer committed on 20 Apr 2011