ARM omap3: make omap3_core.S thumb safe ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM cache-armv7: Add additional ISB ...

At least OMAP3 needs this to properly work with MMU.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap3: reimplement setup_auxcr in pure asm ...

This function consists of only inline asm statements, so
use assembly in the first place. Also makes sure that the
function is compiled in arm mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM omap3: remove vector setup from lowlevel code ...

No need to do this so early. We can't print anything right
now anyway, so there is no need to setup vectors.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM omap3 clock: move pll tables to C code ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM omap3: call a_init from board code ...

There is no need to call a_init before relocation, so rename
the function to omap3_core_init and call it from board code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM omap3: move board_init to pure_initcall ...

board_init initializes the mux and sdram. For both there is no
need to configure this so early. Move the code to a pure_initcall
and remove the surrounding unneeded code.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM omap3 beagle xload: Move stack to SRAM ...

Setting up the clocks does not work when the stack is in SDRAM.
Moving the stack to SRAM allows us to do the lowlevel clock setup
later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

ARM omap3: remove OMAP3_COPY_CLOCK_SRAM ...

The X-loader startup relocates to SRAM anyway, so there
is no need to be runnable from flash for the clock code.
This config is disabled in all defconfigs anyway, so remove
it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>

calao/boards: specify BAREBOX_MAX_IMAGE_SIZE to 256KiB ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap343xdsp: move to arch/arm/boards/omap343xdsp ...

this will allow to create it's own env/config

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap3evm: move to arch/arm/boards/omap3evm ...

this will allow to create it's own env/config

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

beagle: move to arch/arm/boards/beagle ...

this will allow to create it's own env/config

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

omap3: move platform lowlevel init to mach-omap ...

this will allow to switch omap3 to standard organisation

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel/mci: fix slot_b support ...

in commit commit f60f6c58e
atmel_mci: check for device id we use to address the right slot

the driver use the dev_id to detect the slot which is wrong on 9263 as we have
2 devices with 2 slots

use slot_b paramter to specify the slot as done in linux

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9/lowlevel_init: allow to select the smc chipselect ...

this will allow to configure the nand as example

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap: Set IFT target as MLO ...

When CONFIG_OMAP_BUILD_IFT is selected, the
target image name was set to "barebox.bin.ift".
This file must be renamed "MLO" before it can
be used on the SD card.

Make this as default behavior.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap3evm: Enable HSMMC device ...

Enable the HSMMC device to fix these errors:

   Board: Texas Instrument's OMAP3EVM
   Malloc space: 0x87bfff10 -> 0x87ffff0f (size  4 MB)
   Stack space : 0x87bf7f10 -> 0x87bfff10 (size 32 kB)
   booting from MMC1
   mounting sd card failed with -22
   booting failed

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap3evm: Allow building first stage bootloader ...

Enable the flag HAVE_NOSHELL to allow first stage
bootloader to be built for this board.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'master' into next

ARM omap3beagle: Fix incorrect base addresses ...

The base address passed for device "omap-hsmmc" was
incorrectly passed as OMAP_I2C1_BASE and the base
address for device "i2c-omap" was hardcoded to
0x4809C000 which, in fact, refers to OMAP_MMC1_BASE.

Similarly, in call to add_usb_ehci_device(), addition
is not required if right base address is used.
In fact, 0x48064700 (used as base in the addition)
falls in the OHCI Address space.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap: Use updated config option ...

The config option CONFIG_GPMC is renamed to
CONFIG_OMAP_GPMC as result of this commit:
  819f416

Still, sources continue to use CONFIG_GPMC.
Fix it.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: add Calao TNY-A9260/TNY-A9263/TNY-A9G20 ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: add default spi chipselect ressources ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: add spi device ressources ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9260/9g20ek: add led support ...

use ds3 for heartbeat and ds5 for dfu

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9260/9g20ek: add dfu and usb serial support ...

if bp3 is pressed 5s during boot enable dfu otherwise usbserial

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: 9260 and 9g20 add support of join SRAM Memory Mapping ...

on 9269 and 9g20 the sram are mirrored at then of the bank so we can join them

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/compile'

Merge branch 'next'