LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / common

2012-03-06	beb36c5 Browse files » Merge branch 'work/thumb2' into next Sascha Hauer committed on 6 Mar 2012
2012-03-06	104a6a7 Browse files » ARM: Allow to compile in thumb-2 mode ... This shrinks the resulting binary size by ~25%. Exceptions are still handled in arm mode, so we have to explicitely put .arm directives into the exception code. Thumb-2 mode has been tested on i.MX51 Babbage board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 6 Mar 2012
2012-02-27	33d1cc4 Browse files » commands: remove struct command pointer from commands ... This is unused in all commands and thus can be removed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	d59925b Browse files » command: do not allow abbreviated commands anymore ... abbreviated commands are derived from U-Boot and are only partly useful. Noone expects from a shell to support this, also we have tab completion. They also have some funny side effects. For example we have a 'time' command. If this command is not compiled in, the time command is interpreted as an abbreviated version of the 'timeout' command. So remove support for abbreviated commands and safe the binary space. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
	aed0e6b Browse files » getopt: save and restore context ... execute_command is the single point where commands are executed and thus a new getopt context is needed. currently we call getopt_reset here to reset the context. This breaks though when a command tries to run a command itself by calling execute_command or run_command. In this case we have to store the context and restore it afterwards. The same is necessary in builtin_getopt. Currently noone does this so this one shouldn't fix a bug, but merely allows us to do such things later. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 Feb 2012
2012-02-25	a9236dd Browse files » console: use container_of instead of type_data ... This reduces the usage of type_data. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 25 Feb 2012
2012-02-19	16babe2 Browse files » add string for -ETIMEDOUT ... -ETIMEDOUT is a common error value, so print the string rather than just the number. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Feb 2012
2012-02-19	3ac63c6 Browse files » make uimages work on tftpfs ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 19 Feb 2012
2012-02-17	2546c5a Browse files » Merge branch 'pu/device-cleanup' into next Sascha Hauer committed on 17 Feb 2012
	80b7677 Browse files » dos partitions: Do not register as fixed partitions ... A fixed partition means that we can't remove it. This is only suitable for our vital /dev/self0 and /dev/env0 partitions, so remove the fixed flag. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 17 Feb 2012
	06f66dc Browse files » Merge branch 'pu/block' into next Sascha Hauer committed on 17 Feb 2012
2012-02-16	1f22d10 Browse files » readkey: add define for Ascii keys ... this will simplify the usage of gpio keyboard Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 16 Feb 2012
2012-02-15	e3a9e1f Browse files » block: reimplement caching ... The current caching layer only has a single buffer for writing and reading. The FAT driver often accesses the fat and then data again, which currently can't be cached. Reimplement this with a list of cached chunks. The number of chunks and their sizes are currently hardcoded, but that could be easily made configurable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 15 Feb 2012
2012-02-07	21ea9e0 Browse files » Select CMD_LOADENV with DEFAULT_ENVIRONMENT ... The environment isn't loaded until this command is is selected - even if compiled in. This patch makes the dependency explicit. Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sanjeev Premi authored on 7 Feb 2012 Sascha Hauer committed on 7 Feb 2012
2012-01-27	192d6fe Browse files » Merge branch 'pu/debug' into next Sascha Hauer committed on 27 Jan 2012
2012-01-26	641dfaa Browse files » startup: use regular debug statements in initcall debugging ... Now that we don't need malloc for the console anymore it's safe to call printf anytime, so switch the initcall debugging to regular debug() statements.. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Jan 2012
	6d2ac13 Browse files » initcalls: do not hang if an initcall fails ... Currently we just hang when an initcall fails. This resulted in most initcalls just returning 0 unconditionally. Instead of hanging which usually leaves the user without a clue what happened just continue and hope for the best. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Jan 2012
	64a46e2 Browse files » console: make it work without malloc ... This changes the dynamically allocated kfifos to statically initialized ones. This makes the console work without malloc and thus safe to be called before malloc is initialized. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Jan 2012
2012-01-23	4632294 Browse files » introduce barebox_bare_init_size to known the bare_init size and check it ... this allow to check we do not exceed the size of the SRAM as example introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init this will allow your bare_init will fit in SRAM as example ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 17 Jan 2012 Sascha Hauer committed on 23 Jan 2012
2012-01-17	064beaa Browse files » add config to check if the size of barebox exceed the target size ... CONFIG_BAREBOX_MAX_IMAGE_SIZE will allow to detected silent oversize result Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 17 Jan 2012 Sascha Hauer committed on 17 Jan 2012
2012-01-11	971d164 Browse files » param: add config to disable it ... this will allow to save 992 Bytes for TI xlaoder or AT91 bootstrap Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Jan 2012
	507319e Browse files » filetype: add config to disable it ... remove 160 bytes Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Jan 2012
	b7498fd Browse files » banner: add config to disable it ... this will allow to save 144 bytes Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Jean-Christophe PLAGNIOL-VILLARD committed on 11 Jan 2012
	77b1e27 Browse files » dummy_malloc: add calloc support ... needed to use menu framework Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 10 Jan 2012 Sascha Hauer committed on 11 Jan 2012
2012-01-04	4c4fae1 Browse files » poller_call: move from getc to is_timeout ... this will allow to always call poller_call even durring timeout and still the case in getc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 3 Jan 2012 Sascha Hauer committed on 4 Jan 2012
2012-01-03	2071c5d Browse files » Merge branch 'pu/tlsf' into next Sascha Hauer committed on 3 Jan 2012
2012-01-02	26927ba Browse files » defaultenv: use a compressed version when embedded in barebox ... enable it only if a compression is enabled support gzip, bzip2 and lzo you will be able to choose which compression to use -rw-r--r-- 1 root root 8436 Dec 15 01:35 barebox_default_env -rw-r--r-- 1 root root 2782 Dec 15 01:35 barebox_default_env.bz2 -rw-r--r-- 1 root root 2691 Dec 15 01:38 barebox_default_env.gz -rw-r--r-- 1 root root 3262 Dec 15 01:38 barebox_default_env.lzo with using gzip and the default env we can save 5.6KiB (5,745 bytes) with using bzip2 and the default env we can save 5.5KiB (5,654 bytes) with using lzo and the default env we can save 5.1KiB (5,174 bytes) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 31 Dec 2011 Sascha Hauer committed on 2 Jan 2012
2011-12-23	c09fdea Browse files » tlsf: remove unused stuff from tlsfbits.h ... Also, as this file is locally used by the tlsf implementation, move this file to common. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Dec 2011
	5d96cda Browse files » tlsf: implement malloc_stats ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Dec 2011
	2467c61 Browse files » tlsf: enable assertions ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Dec 2011