USB storage: fix disconnect ...

USB storage support missed disconnect support. Implement this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb net: fix unregistration ...

First call mii_unregister which is done in the drivers unbind function,
then eth_unregister. Also, remove unregister_device which is done in
eth_unregister.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb net smsc95xx: add missing mii_unregister ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

usb net smsc95xx: remove unused variable ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Correct Kconfig comment for MCI_OMAP_HSMMC to include OMAP3. ...

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci i.MX esdhc: make 8bit modes platform dependent ...

Whether the controller works in 8bit mode is not only dependent
on the controller but also on the board having wired up 8 data
lines, so put a capabilities field in platform data.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Fix 8 bit mmc cards ...

Currently we test the cards capabilities for being 8bit capable.
This does not work since noone ever sets this bit. Unfortunately
there is no bit to test 8bit capability, so we introduce a patch
from the kernel which puts the mmc card into 8bit mode and tests
whether it can succesfully read the ext_csd in this mode.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Add a complete list of EXT_CSD_* fields from the kernel ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci i.MX esdhc: use timeout loops ...

Too often I have waited to get a reaction from this driver
when something goes wrong. Use timeout loops instead of
inifinite polling loops.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Be more verbose on what device is associated to which disk ...

This is quite useful when multiple SD cards are present so spare
some bytes to print this information.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: cdev_find_free_index won't fail, no need to check ...

There will always be the next integer number unless we register
INT_MAX disk devices which is rarely the case.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: factor out mci/sd specific startup functions ...

This saves an indention level and makes the code more readable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: replace pr_debug with dev_dbg ...

The mci layer uses pr_debug throughout. Use dev_dbg instead
which is very useful when multiple cards are involved.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Use struct mci for internal argument passing ...

The mci layer currently passes around a struct device_d for
its internal use. Apart from being confusing this drops
typesafety for no good reason. Instead, pass around a struct
mci.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci core: fix mixup of max write/read block len ...

The argmument order in this pr_debug does not match
the string printed. Fix this.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: remove unused device argument from set_ios ...

This argmuent is unused in all drivers, so remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci s3c: pass around the right pointer ...

The s3c driver passes around a struct device_d * internally in which
it is never interested in. Instead pass around a struct s3c_mci_host
and get rid of all this ugly void * derefs.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci s3c: allocate host struct dynamically ...

Yes, it does make sense. First there will always be the next
hardware which has multiple controllers. Also, we shouldn't
give bad examples to others.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci s3c: Do not mess with struct mci_host ...

This structure is owned by the core, do not change its contents
in the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci core: replace discrete ios values with struct ios ...

As we'll need more arguments to set_ios over time put them
in a struct mci_ios like the kernel does.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci mxs: do not use external define for internal use ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: fix high capacity detection ...

Whether a card is high capacity is checked in
sd_send_op_cond/mmc_send_op_cond. Remove the wrong check in
mmc_change_freq which wrongly recognizes some eMMC flash
as high capacity.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: use card type definitions ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'next'

drivers/mtd: fix docg3 write support ...

Fix typo error in MTD_WRITE defines.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/mtd: fix mtdraw write support ...

When unaligned writes are used, typically doing a cp file /dev/mtdraw0.foo,
the alignement correction code was incorrectly handling such cases, and
didn't return the expected number of written bytes.

This was tested on a 528 block size.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/debug' into next

net: fec_imx: configure FEC for 10Mbit when necessary ...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: miidev: factor out miidev_get_status() ...

Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: fec_imx: enable payload length check and pause frames ...

Q: "the linux driver add these bits, why not we?"
A: Because nobody activated the bits?

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>