mxs: Add remaining i.MX28 iomux configurations ...

Signed-off-by: Esben Haabendal <esben.haabendal@prevas.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mxs: Cleanup use of blank lines in i.MX28 iomux configurations ...

Signed-off-by: Esben Haabendal <esben.haabendal@prevas.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mxs: Fix i.MX28 PWM3 iomux configuration ...

Signed-off-by: Esben Haabendal <esben.haabendal@prevas.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mxs: Fix support for BITKEEPER() macro ...

There was no check for BE, so any BITKEEPER(1) iomux configurations
were not being applied.

Signed-off-by: Esben Haabendal <esben.haabendal@prevas.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX27: Export boot source to magic variables ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX51: Added definition for 600 mHz PLL setup. ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX27: Added helper for setup chipselect control register ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Completely migrate option ISP1504 to ULPI ...

Since we do not have ISP1504-related functions, we migrated to ULPI.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX51 eukrea_cpuimx51: Remove unused include ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX51 babbage: Remove clock raise from power_init. ...

Because CPU frequency setup called after power initialization,
this call now is not necessary.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'work/imx51-babbage-clk' into next

Merge branch 'work/imx-dcd-size' into next

pm9g45: enable USB OHCI host and USB mass storage ...

FIXME: execute the "usb" command twice to create the /dev/disk0 device.

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pm9g45: enable MCI0 ...

FIXME: part of or no data is written. File copy ends
with message: "atmel_mci@atmel_mci0: command/data timeout"

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pm9g45: fix Ethernet ...

Enable PHY clock.

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pm9g45: boot from NAND ...

- change the kernel and rootfs locations
- correct the NAND mtd partitions
- fix the DDR RAM location(so BareBox load address)
- expect the root file system type to be UBIFS

Signed-off-by: Asen Chavdarov Dimov <dimov@ronetix.at>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX51 lowlevel: setup full cpu speed unconditionally ...

What looked like a TO specific hack really is a hack for
older babbage boards. As the babbage code now handles this
correctly we can remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX51 babbage: move lowlevel setup after power init ...

The imx51 lowlevel setup code currently sets the full cpu
speed only for TO3. It turned out that this is not a TO
specific hack but a hack for older babbage boards. Move
the lowlevel init after babbage_power_init() so that we
can remove the hack from the generic i.MX51 lowlevel
function. As this potentially changes the UART clock we
have to flush the console beforehand and call the clock
notifier afterwards.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX51 clk: select uart clk parent based on hardware setting ...

The previous code assumed pll2 which is correct when we set the
uart parent to pll2 beforehand. The reset default is different
though, so calculate uart parent based on hardware setting.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX flash header: Fix barebox image sizes ...

The image sizes have been hardcoded to 256K. This is inefficient
for smaller images and nonfunctional for bigger images. Calculate
the image size during compile time and use it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM linker script: Fix barebox_image_size ...

barebox_image_size was calculated wrong when PRE_IMAGE is defined.
In this case _text does not refer to the binary image start. We
have to use TEXT_BASE here.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "ARM i.MX53:: Add i2cclk" ...

Actually a duplicate of an earlier patch from Eric Benard.

This reverts commit 109629c.

ARM i.MX53:: Add i2cclk ...

when compiling for a imx53 with i2c enabled i got the following error:

drivers/built-in.o: In function `i2c_imx_set_clk':
/home/ggebhardt/repos/ecuv6_bl/barebox/drivers/i2c/busses/i2c-imx.c:282:
undefined reference to `imx_get_i2cclk'
make[4]: *** [.tmp_barebox1] Error 1
make[3]: *** [CMakeFiles/bootloader] Error 2
make[2]: *** [CMakeFiles/bootloader.dir/all] Error 2
make[1]: *** [CMakeFiles/bootloader.dir/rule] Error 2
make: *** [bootloader] Error 2

I copied the following from the corresponding imx51 implementation.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defenv: remove bogus defaultenv from defconfigs ...

When CONFIG_DEFAULT_ENVIRONMENT_GENERIC is set the Make system
will automatically compile in defaultenv/ into the environment. Some
boards explicitely add this path again in their defconfig which is
not needed. Remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX51: Fix name definition for SSI3 ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX27: Add support for SDHC1,3 ...

imx27_add_mmc0 really registered SDHC2. Fix this by adding a
imx27_add_mmc1 and use this in the pca100 board file. Also add
imx27_add_mmc2 helper for register SDHC3.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX27: Define base address for SDHC1,2,3 ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use mx53-related functions for i.MX53 boards ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use register names for MC13892 ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

i.MX27: Use resigter name in imx27_add_fb ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>