Add next generation default environment template ...

This adds a new environment template which aims to be more flexible
and configurable. Instead of having mainly two scripts (a config script
and a boot script) this template uses initscripts which control the
startup behaviour and configuration. Also we have boot scripts in
/env/boot which configure a single boot configuration. Additional
boot entries can be added by board specific entries or during runtime
by copying and editing a template entry.

Some more helpers handle for example network interfaces which can now
be brought up with 'ifup'. We use the automount feature to configure
mountpoints together with the commands to bring up the devices behind
these mountpoints.

Optionally menu support is available which hides many details behind
a nice looking interface.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

booting: more flexible Linux bootargs generation ...

We currently use the environment variable 'bootargs' to get the
Linux bootargs. This patch allows for a more flexible bootargs
generation using global variables. With it the Linux bootargs
are concatenated from multiple variables. This allows to replace
parts of the bootargs string without having to reconstruct it
completely.
With this bootargs can be constructed like:

global linux.bootargs.base="console=ttyS0,115200"
global linux.bootargs.ip="ip=dhcp"
global linux.mtdparts="physmap-flash.0:512K(nor0.barebox),-(root)"

This will then automatically be combined into a kernel bootargs
string during boot.

If the 'linux.bootargs.' variables are all empty the old standard
'bootargs' way will be used.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add 'global' command ...

This implements global shell variable support. This is done by registering
a new device named 'global', so global variables are just plain device
parameters.
Global variables are useful for storing the global state in the environment.
Currently we do this by sourcing scripts instead of executing them which is
quite limiting.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Introduce binfmt support ...

This will allow to execute any file and detect it's type to handle it.
This will allow to use shell for bootp bootfile or dfu.

You can register multiple hook for the same filetype. They will be execute
in the invert order of register. If a hook does not handle the file you just
return -ERESTARTNOHAND;

This is only available with hush parser.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Makefile: fix build timestamps ...

This patch adds the scripts/mkcompile_h from the Kernel. This gives
us additional information about the build like who built this binary
and with which compiler. Currently the only information used is the
build timestamp and the generation number.
This also fixes the build timestamp in the banner which is now correct
even with consecutive builds without making clean in between.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

filetype: add config to disable it ...

remove 160 bytes

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

banner: add config to disable it ...

this will allow to save 144 bytes

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

defaultenv: use a compressed version when embedded in barebox ...

enable it only if a compression is enabled
support gzip, bzip2 and lzo

you will be able to choose which compression to use

-rw-r--r--  1 root root    8436 Dec 15 01:35 barebox_default_env
-rw-r--r--  1 root root    2782 Dec 15 01:35 barebox_default_env.bz2
-rw-r--r--  1 root root    2691 Dec 15 01:38 barebox_default_env.gz
-rw-r--r--  1 root root    3262 Dec 15 01:38 barebox_default_env.lzo

with using gzip and the default env we can save 5.6KiB (5,745 bytes)
with using bzip2 and the default env we can save 5.5KiB (5,654 bytes)
with using lzo and the default env we can save 5.1KiB (5,174 bytes)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add tlsf-based malloc implementation ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

reimplement uImage code ...

Provide a new API for accessing uImages which makes it easy
for commands to open images, verify them, load to (free) sdram
regions and show information about uImages.

- We now do not load the image to malloced space anymore.
- The data in the header is now stored in cpu native endianess
  after uimage_open which makes it easy to access the header data.
- uImage can be loaded to dynamically allocated sdram regions.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remove old ft_build support ...

This is unused now as its only user (ppc) is switched to
libfdt based oftree support"

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add resource management functions ...

It is time to track our memory usage. Add a simple resource
management.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add file detection support ...

Several filetypes can be autodetected. Barebox could make use
of this in several ways:

- Add a command to detect filetypes
- detect arm zImages and uImages to unify the different boot commands
- maybe detect UBI or JFFS2 images to construct parts of the kernel
  command line
- select correct uncompression function based on filetype

This patch adds basic support to detect filetypes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

DISK: Add common partition handling for disk like media ...

This covers disk like media like SD card, CF cards, regular hard disks and also
USB mass storage devices. Most common used partition table is still of DOS type.
This implementation is prepared to support more partition types in the future.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

initial oftree command support ...

This adds basic device tree command support. So far we can
parse a flat device tree (-p), which also stores the tree
in memory, dump it (-d) and free (-f) the internally stored tree.

The chosen node can be updated with barebox bootargs, no other
device tree manipulation is implemented yet.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands/loads.c: make it compile again ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers: move resource generic management to driver/base/resource.c ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

add a add_mem_device function ...

Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.

And switch all of the memory to it

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

add dummy_malloc functions ...

For some environments the dummy malloc functions offer a very small
alternative implementation. malloc will get its memory from sbrk()
and never frees memory again.
This of course is not suitable for interactive environments and thus
depends on CONFIG_SHELL_NONE

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

malloc: put common memory functions to seperate file ...

These functions are needed independently of the specific
malloc implementation, so move them out.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

make command support optional ...

In a noninveractive environment we do not need commands. So make
them optional.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

env: Make environment variable support optional ...

Environment variables are only useful in interactive environments.
Make it optional on our way to support a noninteractive barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add block support ...

This adds a simple block layer to barebox. Reading and writing
to block devices can be painfully slow without caching, so
add a simple caching layer here.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

move version_string to seperate file ...

In a noninteractive environment barebox will be compiled without
command support. So move version_string to a seperate file which
is compiled unconditionally.
Also, display the banner when the simple console support is used.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: fix empty CONFIG_DEFAULT_ENVIRONMENT_PATH ...

if CONFIG_DEFAULT_ENVIRONMENT_PATH="" then
$(DEFAULT_ENVIRONMENT_PATH) expands to 'defaultenv "" '
The "" would cause every single file found in $(srctree) to be included in
$(ENV_FILES). This would then cause scripts/mod/sumversions.c to get
recompiled using $(CC) and fail compilation if $(CC) points to a newlib
cross compiler

Signed-off-by: Jon Ringle <jon@ringle.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add generic poll infrastructure ...

Barebox does not have interrupt functionality. Nevertheless it's
sometimes useful to periodically call functions, like for example
a heartbeat LED or watchdog reset. Instead of cluttering the code
with calls to these functions this patch adds a generic polling
infrastructure. Code which might run for longer now can call
poller_call() periodically which in turn will call all registered
pollers.
This patch adds a call to poller_call in two generic pathes. First
of them is getc() which covers waiting for uart input. Second is
ctrlc() which should be called anyway from code which might run
for longer. So instead adding poller_call directly to your code,
consider checking ctrlc instead which also gives additional
convenience to the user.
The poller code is safe against reentrancy which means that it's
safe to call poller_call inside a poller.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

defaultenv: introduce CONFIG_DEFAULT_ENVIRONMENT_GENERIC to enable it ...

this will we usefull to enable functionnality if used

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

image: factorise image printing contents ...

Copied from U-Boot

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

image: factorise string helper ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Revert "image: factorise string helper" ...

This reverts commit 7bd7d59.