mmc_omap: improve error message ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci imx-esdhc: increase write timeout ...

The timeout for wating for the bus to be idle is too short when the
card does internal garbage collection. This was triggered with filling
an SD card under Linux with /dev/urandom, then doing a saveenv under
barebox afterwards.
Linux has timeouts here up to 300ms. Use a second to be safe.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd mtdraw: fix fixing partial page read ...

toread is unitialized. We have to use count instead.

| commit 992c291
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date:   Sat Sep 15 16:54:47 2012 +0200
|
|    mtd mtdraw: Fix partial page read
|
|    When reading parts of a page we have to limit the maximum bytes copied
|    to the remaining bytes of a page.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net/tap: use xzalloc to allocate data ...

this will ensure the data are set to 0 (list as example)

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd mtdraw: Fix partial page read ...

When reading parts of a page we have to limit the maximum bytes copied
to the remaining bytes of a page.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>

miidev: fix 1G wrong detection ...

since 99e72c8 on an i.MX51 based board,
I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
the PHY to early and gets 0x3ffff which leads to the wrong capabilities
setting.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

tap: fix missing parent setting on eth_device ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smsc911x: Check platformdata pointer ...

If pdata is NULL smc911x_probe will crash. Checking the zero initialized
priv->shift results in default configuration if pdata is not set.

Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

smc911x: fix typo pn check if the device is ready before using it ...

the check need to be inverted

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd/mtdraw: fix format specifier for ssize_t ...

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: use correct format specifier ...

For the size_t type the format specifier %zu or %zx must be used.
See Documentation/printk-formats.txt in the kernel for details.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/usb'

Merge branch 'for-next/smc911x'

Merge branch 'for-next/ppc' ...

Conflicts:
	arch/ppc/boards/freescale-p2020rdb/p2020rdb.c
	arch/ppc/configs/p2020rdb_defconfig
	arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h

Merge branch 'for-next/pbl'

Merge branch 'for-next/omap'

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/mc13xxx'

Merge branch 'for-next/jtag'

Merge branch 'for-next/imx'

Merge branch 'for-next/i2c'

gpio: add driver for stmpe io-expander ...

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mfd: add stmpe-i2c driver ...

The stmpe mfds can be connected via i2c and spi. This driver provides the basic
infrastructure for the i2c kind. It can be added as a normal i2c-device in the
board code. To enable functions a platform_data struct has to be provided, that
describes what parts of the chip are to be used.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX: switch to gpiolib support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>

i2c: adapt the i2c-imx driver to mpc85xx machines ...

A function to calculate the frequency divider and digital filter sampling rate
for the 85xx processors is added to the i2c-imx driver. Hence, this driver is
usable on IMX and 85xx machines.

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

IMX driver: replace imx -> fsl ...

The IMX i2c driver is to be used by SOCs on both the ARM and PPC architetures.
Use a more neutral name for the structure, function names and #define.
The driver name is now "i2c-fsl".

Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mc13xxx: Fixed memory leak ...

A string allocated by asprintf is not freed, so change it to a sprintf
with the preallocated buffer.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mc13xxx: Hide private struct mc13xxx from other units ...

Board support units must use only the provided functions.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add gpiolib support ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>