mx53 loco: enable smsc phy driver ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mx53-loco: fix phy reset ...

the phy reset neet to be done before the fec driver is registered
as we accesst the phy at the fec probe time

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM pbl: add generated file zbarebox.map to .gitignore ...

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

iomux-imx35: add missing comma in pad definition ...

The same issue was fixed in the Linux kernel in commit

	66ddfc6 (mx35: add a missing comma in a pad definition)

for 2.6.33-rc7.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9xek: fix mtd partition ...

barebox size is 384KiB
and for the official atmel release we need to rootfs at 8M

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM Samsung: Let Nand boot depend on ARCH_S3C24xx ...

It is only available on this SoC.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap: pbl fixes ...

Omap3 pbl build may need omap3_clock.c. Also, do not use add_generic_device
in pbl

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM Samsung: fix pbl build for tiny210 board ...

The Tiny210 needs lowlevel.o and memory setup in the pbl.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM: let THUMB2 select EABI ...

THUMB2 mode needs EABI to build, so select it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pm9g45: fix config and defconfig ...

- add dhcp vendor_id
 - enable glob support (needed by nand)
 - enable pbl
 - enable MMU
 - enable bootm oftree support
 - enable loadb
 - enable nfs
 - use zImage by default

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pm9g45: fix nand partition in c code ...

enable bbt too

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/compiler-warnings'

ARM OMAP: Enable gpio output ...

Enable output instead of disabling it.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: only test for sdl libs when sdl is enabled ...

Otherwise we get the following warning when sdl is not installed
on the compile host:

Package sdl was not found in the pkg-config search path.
Perhaps you should add the directory containing `sdl.pc'
to the PKG_CONFIG_PATH environment variable
No package 'sdl' found

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: remove unused variable ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91sam9x5ek: fix bootstrap size to 256KiB ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

sam9x5ek: drop uart2 as it's not always present ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

at91sam9x5: udpate default ARCH_TEXT to 0x26f00000 ...

On sam9x5 series the bootstrap load the bootloader at 0x26f00000.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

ARM samsung S5P: Enable board support ...

This was once disabled because we had no board support. This has
changed, so enable the S5P board support in the config so that
the friendlyarm_tiny210_defconfig actually builds for the correct
machine.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM a9m2440: Fix lowlevel init ...

board_init_lowlevel is no longer called from generic code, so we can't
just return from in. Instead we have to jump to board_init_lowlevel_return
manually. For the a9m2440 board one case was missed to convert. This
is broken since:

| commit faf7b7a
| Author: Jan Luebbe <jlu@pengutronix.de>
| Date:   Mon Sep 24 10:18:34 2012 +0200
|
|     ARM: give boards control of the reset entry point
|
|     On some SoCs (for example AM35xx), the ROM bootloader passes useful
|     information in r0 when jumping to barebox.
|
|     To avoid overwriting this in the generic reset code, we introduce
|     common_reset as a C function and as an assembler macro. This is then
|     called form the reset entry point (either in common or in board code).
|
|     This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

documentation: add sandbox malloc argument ...

Add malloc argument in doxygen comment.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: fix malloc argument string ...

Fix malloc argument string.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

sandbox: move add_image for env in second getopt ...

Function add_image needs a allocated malloc space.
This is only available in the second getopt loop.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX25: Enable all needed clocks during startup ...

This enables the following clocks on i.MX25:

PER: esdhc1, esdhc2, i2c, nfc, owire, pwm, uart
AHB: emi, esdhc1, esdhc2, fec, lcdc, usbotg
IPG: cspi1, cspi2, cspi3, esdhc1, esdhc2, fec, gpt1, gpt2, gpt3, gpt4,
iim, LCDC_EN, pwm1, pwm2, pwm3, pwm4, spba, tsc, uart1, uart2, uart3,
uart4, uart5

These are hopefully all the clocks we need for barebox.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: close open files ...

Signed-off-by: Vicente <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM OMAP: change region size for gpio banks ...

- increased the region size for OMAP3, as it was not correct
- decrease region size for OMAP4 to prevent overlapping.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM OMAP: Remove usage of gpio lib calls in lowlevel code ...

As the gpio functions are not available at this point, set the gpio manually.

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM OMAP: gpiolib fix chip.base ...

Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM i.MX gpio: fix of gpio base ...

of_alias_get_id() returns the number of the gpio bank, so we have
to multiply with 32 to get the gpio base.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/misc-fixes'