MFD MC34708: Add dependence on SPI ...

MC34708 depend on I2C or SPI, so let driver depend on SPI too
and rename config option name to MFD_MC34708.

Signed-off-by: Wjatscheslaw Stoljarski <wjatscheslaw.stoljarski@kiwigrid.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand: mxs: NO_SUBPAGE_WRITE flag was overwritten ...

It is not the chip, but this controller which cannot do subpage writes.
So, make sure we add the flag at the proper place, so it doesn't get
overwritten by flash detection anymore.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/net-link'

net phylib: force to wait for link ...

When starting a network device wait until the link is up. Otherwise
autobooting does not work with little timeout and several attempts
have to be made until the network is finally up.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/base: fix corrupt device tree ...

dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:

| commit c2e568d
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date:   Sat Nov 3 16:11:05 2012 +0100
|
|    bus: add bus device
|
|    automatically add it as parent of any bus device if none already specified
|
|    we have now a nice output per bus

If for example a FATfs is mounted this nice output per bus often ends with:

>     `---- fat0
>     `---- 0
>          `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
>          `---- sram00
>               `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
>               `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
>               unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>]    lr : [<87f08a04>]
> sp : 86eff8c0  ip : 87f3fbde  fp : ffffffff
> r10: ffffffff  r9 : 00000000  r8 : 00000003
> r7 : 86f075b8  r6 : 00000002  r5 : ffffffec  r4 : 86f07544
> r3 : 00000000  r2 : 43f900b4  r1 : 00000020  r0 : 00000005
> Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)

This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>

net phylib: Clear BMCR_PDOWN bit ...

Some phys come up with this bit set, clear it so that these phys
can work. This has been observed with a ASIX compatible USB ethernet
adapter.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'kconfig'

Fix wrong Kconfig reference to ARCH_IMX31 ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove bad Kconfig reference to MTD_NAND ...

Barebox not contain symbol MTD_NAND, so remove all references to it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove bad Kconfig reference to DISK_DRIVE ...

Barebox not contain symbol DISK_DRIVE, so remove all references to it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove bad Kconfig reference to HAVE_CLK ...

Barebox not contain symbol HAVE_CLK, so remove all references to it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/phylib' ...

Conflicts:
	drivers/net/phy/phy.c

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/mfd'

Merge branch 'for-next/mci'

Merge branch 'for-next/led'

Merge branch 'for-next/driver'

Merge branch 'for-next/clk'

ata: Add i.MX AHCI driver ...

This adds the glue code for the i.MX SATA controller. This controller
needs some i.MX specific setup and some SoC specific setting outside
the controller itself. The code for setting up the correct clock source
for the SATA phy has been taken from U-Boot.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: Add ahci support ...

This adds ahci controller support based on U-Boot ahci support. Unlike
U-Boot we do not push the SCSI layer in between, but use the ata interface
directly. Tested on a Freescale i.MX53.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: Use dma_alloc for buffer ...

ATA devices using DMA may need a sufficiently aligned buffer, so use
dma_alloc instead of regular malloc.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: align ata command defines with kernel ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: split ide sff suport to separate file ...

Currently we only support oldschool IDE SFF devices. This is done
by registering a register layout struct and everything else is done
by the generic IDE SFF driver. Since modern ATA devices still use
ATA, but not the SFF interface anymore, split out the IDE SFF support
to a separate file to allow for other types of ata interfaces.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: fix status flags ...

Some status flags are wrong, fix them. All of them are currently unused,
so no functional change included.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: register disks as /dev/ata* ...

Using /dev/disk* for every type of device is not helpful. It increases
the chance that the user doesn't know which file corresponds to which
device. So rename ata device files to /dev/ata*. Also add a dev_info
about which device just has been registered.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'pu/clk' into for-next/clk ...

Conflicts:
	include/linux/clk.h

clk: use the 'CLK_ALWAYS_ENABLED' flag for clk-fixed by default ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd core: call driver write function with complete buffer ...

mtd->write is supposed to loop around pages internally, no need
to do this in mtd_write. This fixes a huge write performance drop
with the m25p80 driver when it was converted to a mtd driver recently.
Since mtd->writesize is 1 for this driver mtd_write ended up doing
single byte writes on the flash.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>