fixup! commands: add ubiformat ...

This adds the missing ubiformat.c file missing from:

commit 5a29d4a
Author: Wolfram Sang <w.sang@pengutronix.de>
Date:   Mon Dec 17 16:48:33 2012 +0100

    commands: add ubiformat

    Imported from mtd-utils and stripped down to needed functionality.
    Based on an older version (1.4.5.) since the newer do use MEMWRITE
    interfaces which we don't have in barebox (yet).

    Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
    Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: add ubiformat ...

Imported from mtd-utils and stripped down to needed functionality.
Based on an older version (1.4.5.) since the newer do use MEMWRITE
interfaces which we don't have in barebox (yet).

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: consolidate ubi-media.h ...

We have two versions in the tree. Use the newer one, and put it into the
mtd directory while we are at it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: flash: add missing newlines to error messages ...

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'kconfig'

Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mem-commands'

Merge branch 'for-next/ext4'

filetype: Pass bufsize ...

Pass the buffer size to the file detection code. This makes sure we do not
read past the buffer. This is especially useful for ext filesystem detection
as the magic is at byte offset 1080. Also introduce a FILE_TYPE_SAFE_BUFSIZE
define which is set to the minimum bufsize the detection code needs to detect
all known filetypes.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ls command: call stat() only when necessary ...

When calling ls in short mode we do not have to call stat()
for additional informations because we do not use them. This
speeds up ls on filesystems on which stat() is expensive
because the barebox filesystem support always has to iterate
over the directory tree.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

loadenv: allow more fine grained environment loading ...

This implements two new options for the loadenv command:

-s: removes (scrubs) old directory contents to be able to
    create a fresh environment from for example /dev/defaultenv
-n: no overwrite. Do not overwrite existing files. This allows
    to keep parts of the old environment.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

rm: implement -r ...

To recursively remove files and directories.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: mw: add the '-x' option (swap bytes) ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: md: add the '-x' option (swap bytes) ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mem: add the swab (swap bytes) option to memory_display() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

splash: init struct allocated the stack to 0 ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ymodem'

Merge branch 'for-next/spi'

Merge branch 'for-next/nand-test'

Merge branch 'for-next/misc' ...

Conflicts:
	commands/Makefile

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx' ...

Conflicts:
	arch/arm/boards/guf-neso/lowlevel.c
	arch/arm/boards/pcm038/lowlevel.c
	commands/Makefile

Merge branch 'for-next/filetype-command'

commands: remove old Y-Modem implementation ...

As a new implementation of Y-Modem protocol is available,
switch from old implementation to the new one :
 - remove old xyzModem* files
 - remove old command loady2
 - rename command loady2 to loady

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

commands: change Y-Modem implementation ...

The current Y-Modem implementation has some limitations:
 - Y-Modem/G protocol is not supported
 - Multiple files (aka. batch) transfers are not supported
 - Transfer speed over fast lines (USB console) is slow
 - Code is not trivial to maintain (personnal opinion)

This implementation tries to address all these points by
introducing loady2 command.

The effects are :
 - transfer speed for Y-Modem over USB jumps from 2kBytes/s
   to 180kBytes/s
 - transfer speed for Y-Modem/G jumps to 200kBytes/s
 - multiple file transfers are possible

This command was tested on a USB console and UART 9600bps
serial line :
 - NAKs (and retransmissions) were tested for faulty
   serial lines
 - multiple file transfers were tested
 - Y-Modem, Y-Modem/G and X-Modem transfers were tested

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

introduce spi command ...

usefull to debug spi

The command allow to read/write on a spi device

Usage: spi [OPTION] [data to write 0xXX]
write/read spi device.
  -b <bus_num>  spi bus number (default = 0)
  -r <count>    to read
  -c <cs>       chip select (default = 0)
  -m <mode>     spi mode (default = 0)
  -f <hz>       max_speed_hz (default = 1MHz)
  -w <bit>      bits_per_word (default = 8)
  -v            verbose

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mount: add compatibility to old mount command ...

the mount command used to have the syntax 'mount <dev> <type> <mountpoint>'.
This was changed to the more Linux like behaviour which specifies the
type with the -t <type> option. If a newer barebox is run on a device
with an older environment the mount command no longer works. This patch
adds compatibility to the old behaviour.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Do not cross 1MiB sections for the devicetree ...

ARM Linux only maps a single 1MiB section for the devicetree. This has
a 1Mib alignment, so we are not allowed to cross such a boundary. Align
the devicetree to the next power of two so that this never happens.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

bootm: Add a define for the additional devicetree size ...

The fixed devicetree may need more space than the original one.
We used to use 0x8000 here. Add a define for it to have the
space defined at a single place.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

add filetype command support ...

This adds support for a filetype detection command. It can be
used to print a filename on the console or to set a variable
with the detection result for use in shell scripts.
The command also has an option to print the known filetypes
so that a user knows what to match for.

Based on an earlier version from Jean-Christophe.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

environment variables: use linux list ...

This switches environment variables to use linux list. This is easier
to read. An additional plus is that the environment variables no longer
need an initcall, so malloc is the only requirement for them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>