nand_write: initialize OOB buffer for each page ...

Previously, during a multi-page write, chip->oob_poi would not be
reinitialized.

See commit f722013 in the kernel
for an analogous change.

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd-core: fix compiler warning ...

Got this compile warning if MTD_WRITE support isn't set.

drivers/mtd/core.c: In function 'mtd_ioctl':
drivers/mtd/core.c:117:26: warning: unused variable 'ei' [-Wunused-variable]

Add a #ifdef to declaration of variable 'ei' to solve it.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/ubi'

Merge branch 'for-next/omap'

mtd: atmel_nand: request and configure pio via gpiolib ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

at91: use gpio_is_valid to check gpio ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ARM omap: include individual SoC files ...

- remove mach/silicon.h and include omap?-silicon.h directly
- include mach/omap?-clock.h directly where needed

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

devfs & mtd: add MEMERASE ioctl support ...

To make that, we need to shift mtd_erase before mtd_ioctl.
ubi-utils need that, especially ubiformat.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ubi: consolidate ubi-media.h ...

We have two versions in the tree. Use the newer one, and put it into the
mtd directory while we are at it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: drop custom is_power_of_2() ...

We have proper version in log2.h these days.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand: mxs: NO_SUBPAGE_WRITE flag was overwritten ...

It is not the chip, but this controller which cannot do subpage writes.
So, make sure we add the flag at the proper place, so it doesn't get
overwritten by flash detection anymore.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

drivers/base: fix corrupt device tree ...

dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:

| commit c2e568d
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date:   Sat Nov 3 16:11:05 2012 +0100
|
|    bus: add bus device
|
|    automatically add it as parent of any bus device if none already specified
|
|    we have now a nice output per bus

If for example a FATfs is mounted this nice output per bus often ends with:

>     `---- fat0
>     `---- 0
>          `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
>          `---- sram00
>               `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
>               `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
>               unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>]    lr : [<87f08a04>]
> sp : 86eff8c0  ip : 87f3fbde  fp : ffffffff
> r10: ffffffff  r9 : 00000000  r8 : 00000003
> r7 : 86f075b8  r6 : 00000002  r5 : ffffffec  r4 : 86f07544
> r3 : 00000000  r2 : 43f900b4  r1 : 00000020  r0 : 00000005
> Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)

This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>

Merge branch 'kconfig'

Remove bad Kconfig reference to MTD_NAND ...

Barebox not contain symbol MTD_NAND, so remove all references to it.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mtd'

mtd core: call driver write function with complete buffer ...

mtd->write is supposed to loop around pages internally, no need
to do this in mtd_write. This fixes a huge write performance drop
with the m25p80 driver when it was converted to a mtd driver recently.
Since mtd->writesize is 1 for this driver mtd_write ended up doing
single byte writes on the flash.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd nand: allow partial page writes ...

The nand layer handles partial page writes just fine. If the start or
end of the data is not page aligned, the nand layer will copy the data
to a temporary page buffer.
Remove the check which disallows partial page writes since this is what
we want to do on barebox when for example an image is written to nand
which is not padded to page size.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems ...

It could happen (1 out of 100 times) that NAND did not start up
correctly after warm rebooting, so barebox could not find its
environment or DMA timed out due to a stalled BCH. When resetting BCH
together with GPMI, the issue could not be observed anymore. We probably
need the consistent state already before sending commands to NAND.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd oob: do not register oob device for devices without oob ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Revert "mtd: atmel_nand: optimize read/write buffer functions" ...

As in the kernel we revert as this was supposed to work but does not yet
this may need more work on the smc to be able to use it
So for now revert it

This reverts commit 809f0f6.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

atmel_nand: fix pmecc timeout ...

the timeout is 100ms not 100ns

on sam9x5 the SoC is fast enough so we can not see it
but not on sam9n12

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

m25p80: sync flash support with the kernel ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

m25p80: re-import it againt mtd_add_host ...

so we now create the cdev via mtd

This will also simplify sync with linux

to avoid the m25p8000 or m25p00 the cdev is still named name m25p and the
drivers m25p80

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

nand-bb: Fix remove of nand-bb device. ...

Fixed possible crashs if nand-bb device is removed
and the list entry was not deleted from the list.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/mxs'

Merge branch 'for-next/mtd' ...

Conflicts:
	arch/arm/configs/at91sam9x5ek_defconfig

Merge branch 'for-next/misc' ...

Conflicts:
	commands/Makefile

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/imx' ...

Conflicts:
	arch/arm/boards/guf-neso/lowlevel.c
	arch/arm/boards/pcm038/lowlevel.c
	commands/Makefile

mtd: introduce mtd_block_isbad ...

this allow to do not provide block_isbad at mtd driver level
as example spi flash

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>