Remove unused config.h ...

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: initialize malloc pool before start_barebox() ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: pbl: fix none compression support ...

Here's the error message:

  AS      arch/mips/pbl/piggy.shipped.o
  arch/mips/pbl/piggy.shipped.S: Assembler messages:
  arch/mips/pbl/piggy.shipped.S:1: Error: unrecognized opcode `globl input_data'
  make[1]: *** [arch/mips/pbl/piggy.shipped.o] Error 1
  make: *** [zbarebox.bin] Error 2

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/pbl'

Merge branch 'for-next/misc'

pbl: add none compression support ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

pbl: factorise decompressor ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: dlink-dir-320: use mips_add_ram0() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: rzx50: use mips_add_ram0() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: qemu-malta: use mips_add_ram0() ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: introduce ram0 regions register function ...

On MIPS there are two segments in CPU address space that
can be used for untranslated memory access: KSEG0 and KSEG1.
KSEG0 is used for cached access and KSEG1 is used for
uncached one.

The instroduced mips_add_ram0() function registers two
address regions for memory access: one in KSEG0 and
the other one in KSEG1.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

barebox-data: add barebox-data sections ...

Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

remap_range: make function 'remap_range' global ...

Change function remap_range in arm architecture to make it
global accessable. For example command 'memtest' can change
pte flags to enable or disable cache.

Add dummy function for others architectures that doesn't
have mmu or pte support.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: qemu-malta_defconfig: use pbl ...

USAGE

 $ make qemu-malta_defconfig
   ...
 $ make
   ...
 $ qemu-system-mips -nodefaults -M malta -m 256 \
           -nographic -serial stdio -bios ./barebox-flash-image

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: qemu-malta: add trivial pbl support ...

Trivial pbl support has no cpu specific setup.
We will add cache setup routines in the future.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add pre-bootloader (pbl) image support ...

This patch is based on ARM pbl support and allows
creating a pre-bootloader binary for compressed image.

For different MIPS SoCs (or even for different boards based
 on the same SoC) the operations carried on in start-pbl.S
can be very different. The additional constraints can be imposed
on the size of the boot code or the special magic labels in
the beginning of the boot code; In some cases it could be
necessary to show CPU is alive as early as possible
(transmit a char via UART or blink a LED).
So the demands for pbl start operation can be very different.

E.g. malta board store boot code at the NOR flash mapped
to the MIPS power-on address (0xbfc00000); it is the most
simple case: we need just copy pbl image from direct-mapped
flash to RAM and jump there.

The XBurst-powered boards store boot code in the beginning
of a NAND flash or in the beginning of SD/MMC card.
In this case we must use simple and short NAND or SD/MMC access
routines to copy pbl image to RAM.

To meet so different demands a simple technique is selected:

* MIPS pbl entry point located in file arch/mips/boot/start-pbl.S.

* MIPS pbl code (see start-pbl.S) assumes that every pbl-enabled
board has a arch/mips/boards/<BOARD>/include/board/board_pbl_start.h
header file. This file must contain definition of
the board_pbl_start macro. This macro is used as start of pbl image;

* the most popular asm routines (stack setup, relocation to link
address, NS16550 initialization (WIP) and so on) are containt
in the arch/mips/include/asm/pbl_macros.h header file.
So board pbl macro can use it if necessary.
It is possible to create similar headers with macros for each
specific SoC; so even if we have many different boards based
on the same SoC the board_pbl_start macro for every board
can be short and clear.

* after board-specific initialization the stack pointer
is initialized and pbl C code is started.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'kconfig'

Cleanup Kconfig files ...

This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

debug_ll: Let architectures define PUTC_LL directly ...

putc already is a regular barebox function. To avoid conflicts and
confusions just let architectures define PUTC_LL directly instead
of going through this addiotional redirection.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: fix out-of-tree build ...

The commit

  commit d25d94b
  Author: Antony Pavlov <antonynpavlov@gmail.com>
  Date:   Fri Jun 1 13:23:20 2012 +0400

      MIPS: make possible board-specific header files

      This patch makes possible to put a board-specific
      header file (e. g. foobar.h) to arch/mips/boards/*/include/board/.

breaks the out-of-tree build for the boards that use it (rzx50).

Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: main_entry.c: fix typo ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: remove unused variable ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/tftp'

defconfig: Switch all defconfig to new tftp command ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Treewide: remove address of the Free Software Foundation ...

The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mips: remove undefined local_irq_save/local_irq_restore ...

mips currently uses local_irq_save and local_irq_restore
which are not defined. Drop them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Antony Pavlov <antonynpavlov@gmail.com>

Merge branch 'for-next/pbl'

Makefile: generate a barebox-flash-image link ...

Depending on the SoC a barebox.bin, barebox.netx, barebox.s5p, MLO image
is generated. With pbl support there now is an additional
arch/arm/pbl/zbarebox.bin image.

To help the user to determine which image should be flashed to his device,
generate a barebox-flash-image link.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

devices: fix missing conversion to DEVICE_ID_DYNAMIC ...

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

MIPS: add initial exceptions handling ...

Checking exception handling:

    $ make qemu-malta_defconfig
    $ make

    ...

    $ qemu-system-mips -nodefaults -M malta -m 256 \
       -nographic -serial stdio -bios ./barebox.bin

    ...

    barebox:/ md -l 0x03

    Ooops, address error on load or ifetch!
    EPC = 0xa082783c
    CP0_STATUS = 0x00000006
    CP0_CAUSE = 0x00000410
    CP0_CONFIG = 0x80008482

    ### ERROR ### Please RESET the board ###

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>