LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2013-05-21	2683e56 Browse files » fdt: Fix dt memreserve entry ... The fdt reserve map needs address/size values, not address/end values like accidently done for generating the reserve entry for the dt. Reported-by: Jürgen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
2013-05-17	ae6f751 Browse files » nand_base: sync flash detection functions with linux 3.9's code ... this fix the problems introduced when detecting non ONFI flashes in commit `4c2bdc8` "nand_base: detect more ONFI flash" Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Eric Bénard authored on 15 May 2013 Sascha Hauer committed on 17 May 2013
2013-05-08	6a5e4f0 Browse files » MCI/MXS: fix signed/unsigned mismatch ... Using the MXS MCI driver with an eight bit capable eMMC results into the 'devinfo' message the interface uses '0' bits for data transfer: barebox:/ devinfo mxs_mci0 resources: num : 0 start : 0x80034000 size : 0x00002000 driver: mxs_mci bus: platform Interface Min. bus clock: 1476 Hz Max. bus clock: 48000000 Hz Current bus clock: 24000000 Hz Bus width: 0 bit The eight bit interface width is stored internally as value '2'. And a two bit '2' ends up into 0xfffffffe when used as an array index. Using an unsigned field instead fixes this issue: barebox:/ devinfo mxs_mci0 resources: num : 0 start : 0x80034000 size : 0x00002000 driver: mxs_mci bus: platform Interface Min. bus clock: 1476 Hz Max. bus clock: 48000000 Hz Current bus clock: 24000000 Hz Bus width: 8 bit Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 8 May 2013 Sascha Hauer committed on 8 May 2013
2013-05-08	259591d Browse files » qt1070: drop non used buf ... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Jean-Christophe PLAGNIOL-VILLARD authored on 7 May 2013 Sascha Hauer committed on 8 May 2013
2013-05-06	740f01f Browse files » Merge branch 'for-next/tegra' Sascha Hauer committed on 6 May 2013
	c19efab Browse files » Merge branch 'for-next/param' ... Conflicts: drivers/mci/mci-core.c Sascha Hauer committed on 6 May 2013
	579b794 Browse files » Merge branch 'for-next/of' ... Conflicts: arch/arm/mach-imx/Makefile Sascha Hauer committed on 6 May 2013
	646a0d0 Browse files » Merge branch 'for-next/mxs' Sascha Hauer committed on 6 May 2013
	18ffa4d Browse files » Merge branch 'for-next/mtd' Sascha Hauer committed on 6 May 2013
	c8af035 Browse files » Merge branch 'for-next/misc' Sascha Hauer committed on 6 May 2013
	a20caf6 Browse files » Merge branch 'for-next/mci' Sascha Hauer committed on 6 May 2013
	e0efc0a Browse files » Merge branch 'for-next/gpio' Sascha Hauer committed on 6 May 2013
	f0f890a Browse files » clkdev: fix typo ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 5 May 2013 Sascha Hauer committed on 6 May 2013
2013-04-30	7c15fd1 Browse files » NAND: imx: Fix memory leak ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 26 Apr 2013 Sascha Hauer committed on 30 Apr 2013
	32d5315 Browse files » MCI: imx: Fix possible null pointer dereference ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 26 Apr 2013 Sascha Hauer committed on 30 Apr 2013
	ef3e752 Browse files » MCI: atmel: Fix possible null pointer dereference ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 26 Apr 2013 Sascha Hauer committed on 30 Apr 2013
	91214e3 Browse files » ata: Remove wrong DISK_DRIVE symbol ... DISK_DRIVE is missing in Kconfig, so remove the "select" statement. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 28 Apr 2013 Sascha Hauer committed on 30 Apr 2013
2013-04-26	47e2d9f Browse files » MCI/MXS: report a better matching error code when the transfer fails ... EIO is a better error message to describe the data transfer to or from the SD cards has failed. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 26 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	869dc35 Browse files » MCI/Core: honor transmission limits at the card's side ... The host limits are only one limit we must honor when changing the transmission frequency. The SD cards have their own limits, so take them also into account. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 26 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	bd041b2 Browse files » MCI/Core: increase the transmission frequency while card detection ... According to the SD card spec the detection can happen at 400 kHz Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 26 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	93c90a9 Browse files » MXS/MCI: simplify reset of the MCI device block ... Since a generic block reset function is a available, also the MCI driver should make use of it. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 23 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	57c6458 Browse files » MXS/MCI: don't touch variables in the host structure ... MMC_BUS_WIDTH_* macros do not correspond with the real bus width. After setting a bus width larger than 1 bit the next call to change the frequency ends in the default handler and the host interface stays silently at the previous frequency. Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Juergen Beisert authored on 26 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	aec4ccd Browse files » mci: imx-esdhc: remove cache snoop register access ... Remove some leftover from former powerpc support which has no relevance for i.MX based esdhc controllers. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 26 Apr 2013
	9b22b92 Browse files » of: fix typos ... Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Antony Pavlov authored on 25 Apr 2013 Sascha Hauer committed on 26 Apr 2013
	97c6363 Browse files » of: fix how an initrd is passed to Linux ... Linux expects linux,initrd-end to contain the first unused address. As this doesn't match the end semantic used by barebox (i.e. end contains the last used address) adding one is necessary. Without this change Linux fails for me to correctly extract a gzipped cpio archive provided as initrd. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Uwe Kleine-König authored on 25 Apr 2013 Sascha Hauer committed on 26 Apr 2013
2013-04-23	32dc070 Browse files » pinctrl: move imx-iomux-v1 to drivers/pinctrl/ ... For consistency reasons. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Apr 2013
	e2f9687 Browse files » pinctrl: move imx-iomux-v2 to drivers/pinctrl/ ... For consistency reasons. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Apr 2013
	e20ee61 Browse files » pinctrl: switch i.MX iomux-v3 support to pinctrl ... This switches the iomux-v3 (found on i.MX25,35,51,53,6) to pinctrl support. The old SoC specific API is kept for compatibility. The pinctrl devicetree support is enabled automatically when OFDEVICE support is available. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Apr 2013
	7f63c0a Browse files » Add initial pinctrl support ... This is a massively stripped down pinctrl support. The upper API consists of only of: int pinctrl_select_state(struct device_d dev, const char state); This is used to setup the pinmux for a device to a certain state. This function normally does not need to be called manually. The device core will setup the default state before probing a device. The pinctrl core has the job of handling the devicetree. It parses the pinctrl phandles for a device from devicetree, finds the correct pinctrl device and calls its set_state callback with the pinctrl setup device node. The simplicity of this pinctrl framework comes from the fact that we: - Limit usage to devicetree only for now. For non devicetree use the old legacy SoC specific APIs still can be used. - Do not parse the devicetree into internal data structures which are used by the drivers later. This adds the overhead that we may parse the devicetree multiple times for more dynamic setups, but on the other hand we do not need to parse devices from the devicetree we don't use in barebox - Do not detect resource conflicts. Since the framework mainly is a devicetree parser this would be hard to implement. It should be easy for board maintainers to avoid resource conflicts though. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 Apr 2013
2013-04-22	6c9bc19 Browse files » ARM: i.MX: Move GPIO driver to drivers/gpio ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 20 Apr 2013 Sascha Hauer committed on 22 Apr 2013