nand_base: sync flash detection functions with linux 3.9's code ...

this fix the problems introduced when detecting non ONFI flashes in
commit 4c2bdc8
"nand_base: detect more ONFI flash"

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

gpio: fix typos ...

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/param' ...

Conflicts:
	drivers/mci/mci-core.c

Merge branch 'for-next/of' ...

Conflicts:
	arch/arm/mach-imx/Makefile

Merge branch 'for-next/mtd'

Merge branch 'for-next/misc'

Merge branch 'for-next/memory-commands'

common/filetype: move partition-table detection into own function ...

Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Add initial pinctrl support ...

This is a massively stripped down pinctrl support. The upper API
consists of only of:

int pinctrl_select_state(struct device_d *dev, const char *state);

This is used to setup the pinmux for a device to a certain state.
This function normally does not need to be called manually. The
device core will setup the default state before probing a device.

The pinctrl core has the job of handling the devicetree. It parses
the pinctrl phandles for a device from devicetree, finds the correct
pinctrl device and calls its set_state callback with the pinctrl
setup device node.

The simplicity of this pinctrl framework comes from the fact that
we:

- Limit usage to devicetree only for now. For non devicetree use the
  old legacy SoC specific APIs still can be used.
- Do not parse the devicetree into internal data structures which
  are used by the drivers later. This adds the overhead that we
  may parse the devicetree multiple times for more dynamic setups,
  but on the other hand we do not need to parse devices from the
  devicetree we don't use in barebox
- Do not detect resource conflicts. Since the framework mainly is
  a devicetree parser this would be hard to implement. It should
  be easy for board maintainers to avoid resource conflicts though.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: partitions: pass struct cdev as argument ...

pass a struct cdev instead of the cdev name to of_parse_partitions.
This is available to the caller anyway and makes it easier to use
additional stuff from the cdev (like knowing whether it's a mtd
device).

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Allow multiple resources in 'reg' property ...

Some devices need multiple resources in the reg property. This patch
adds support for it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of: Add of_property_read_string_index() ...

Directly imported from the Kernel

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Remove unimplemented usb_driver_unregister declaration ...

We do not have usb_driver_unregister function, so remove this declaration.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Use a common define for RW_BUF_SIZE ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memory commands: move memory_display to separate file ...

memory_display is a function which should generally be available.
Currently it depends on memory command support being compiled in,
so move the function to a separate file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

memory commands: export common functions ...

The memory commands all use open_and_lseek and mem_parse_options. Export
them to be able to split the memory commands into separate files.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: Nand: Use dev_add_param_bool for erasebad parameter ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

console: Use dev_add_param_int for baudrate parameter ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: pass param to dev_remove_param ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

fb: Use dev_add_param_bool for enable parameter ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

ata: Use dev_add_param_bool for probe parameter ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mci: Use dev_add_param_int for probe parameter ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: remove now unused dev_[gs]et_param_ip ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

net: store ethernet device parameters in device ...

Rather than storing the parameters globally and trying to keep them
in sync with the device parameters, store the parameters in the ethernet
device directly. Also, update to dev_add_param_ip().

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: Add ip address convenience function ...

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

mtd: update NAND manufacturer names from the kernel ...

Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: Add integer and boolean parameter helpers ...

This adds convenience functions for directly registering integers
and bools as device parameter. This way driver no longer have to
fiddle with string handling. The format used to print the parameter
is passed to the functions to be able to print parameters in a
flexible way.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

param: Add dev member to struct param_d ...

This will make it unnecessary to pass the dev pointer around later.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

of/net: Add net related of helpers ...

of_get_phy_mode to parse the phy mode from the devicetree and
of_get_mac_address to parse a MAC address from the devicetree.
Directly taken from the Kernel.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

Merge branch 'for-next/zynq' ...

Conflicts:
	arch/arm/Makefile