LuminaSensum/barebox

Fork: 0

LuminaSensum / barebox

History for barebox / drivers

2013-05-30	86974b5 Browse files » mci: imx-esdhc: allow to specify devicename via OF alias ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	1f0a317 Browse files » of: Add of_alias_get function ... This is used to retrieve the name of the alias for a given devicenode. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	abee214 Browse files » mci: set name of mci device to same name as the filename ... We already have the possibility to register a mci with a certain filename to get persistent names. However, the device needed to find the probe parameter still has the name 'mcix'. This patch changes this by registering the mci device with the same name as the filename. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	895c0be Browse files » mci: embed mci device into struct mci ... To safe a separate allocation and to make the code simpler. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	c68feb4 Browse files » mci: make mci device a pure device ... No need to match and probe the device if all that we want is a logical deivice for the mci. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	73b0d22 Browse files » driver: Attach info callback to device, not to driver ... Since the info is device specific and not driver specific, attach the callback to the device. This makes it possible to have a info callback for a device which does not have a driver attached. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	4a4f2f2 Browse files » mci: Add support for MMC boot partitions ... Some MMC cards support boot partitions. These are special regions on the MMC card intended to put a bootloader on. This patch adds support for these partitions, they are accessible as /dev/diskx.boot[0\|1]. Additionally the partitions can be configured bootable using a device parameter. This can be used to mark the user area or one of the boot partitions as bootable. Since this feature is mostly seen on eMMC cards it is made optional to lower the size impact for boards which do not have eMMC. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	93b1578 Browse files » mci i.MX esdhc: Fix clock divider calculation ... This updates the i.MX esdhc divider settings to FSLs U-Boot. Current timings work fine for SD cards, but not for eMMC. Although the calculation is fine according to the datasheet and reading from eMMC works, writing is broken. Atleast on i.MX53/tqma53. With this patch the result is the same, but uses different divider values to achieve it. While at it, replace the udelay with a busy-loop. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
	2f2329f Browse files » MCI: Sort Makefile entries ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
	425bf8b Browse files » ARM: OMAP MCI: Move TWL6030 power initialization into OMAP directory ... Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Alexander Shiyan authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
	2821446 Browse files » Added sd driver for bcm2835 (Raspberry PI) ... Replaced defines according to sdhci.h Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> wilhelm authored on 10 May 2013 Sascha Hauer committed on 30 May 2013
	bd1bf53 Browse files » mci: imx-esdhc: factor out common sdhci registers ... This gives the SDHCI specific registers a common name and moves them to a separate file for use by other SDHCI like drivers. The SDHCI spec has some 16bit and 8bit registers. The i.MX accesses these as 32bit registers. These register defines now are named after the SDHCI registers they combine into one, for example: SDHCI_HOST_CONTROL__POWER_CONTROL__BLOCK_GAP_CONTROL is the 32bit version of the SDHCI registers HOST_CONTROL, POWER_CONTROL and BLOCK_GAP_CONTROL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 30 May 2013
2013-05-27	0d7ac7c Browse files » mtd: call mtd_erase with complete area if possible ... If a device does not have bad blocks loop over the eraseblocks in the driver instead of the core. This allows the mtd_dataflash driver to erase blocks instead of pages to gain more speed during erasing. Also the mtd_dataflash driver modifies the erase_info struct which causes the outer loop in the core to never end. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	ecceaac Browse files » cfi: make hardware device parent of mtd device ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	736f711 Browse files » cfi: Add dev * to flash_info and switch to dev_* ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	6d7cd20 Browse files » cfi: remove unused field from struct flash_info ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	3ece590 Browse files » net: fec_imx: default phy address to -1 for dt probe ... To enable automatic probing of the phy. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 27 May 2013
	24b9ea6 Browse files » cfi_flash: size_ratio should not be 0 ... We will get size = 0 if size_ratio = 0 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 May 2013 Sascha Hauer committed on 27 May 2013
	fbf9d87 Browse files » cfi_flash: add shift option for some cfi memory chips ... Many cfi chips support 16 and 8 bit modes. Most important difference is use of so called "Q15/A-1" pin. In 16bit mode this pin is used for data IO. In 8bit mode, it is an address input which add one more least significant bit (LSB). In this case we should shift all adresses by one: For example 0xaa << 1 = 0x154 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Oleksij Rempel authored on 22 May 2013 Sascha Hauer committed on 27 May 2013
2013-05-23	c5fa299 Browse files » param: Add info function ... Some parameters may wish to provide some information about their meaning or possible values. Provide an info callback for parameters. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 23 May 2013
	ab02b5a Browse files » Merge branch 'for-next/of-misc' into for-next/imx-oftree Sascha Hauer committed on 23 May 2013
	d5699b5 Browse files » Merge branch 'for-next/of' into for-next/imx-oftree Sascha Hauer committed on 23 May 2013
2013-05-21	2683e56 Browse files » fdt: Fix dt memreserve entry ... The fdt reserve map needs address/size values, not address/end values like accidently done for generating the reserve entry for the dt. Reported-by: Jürgen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
	fe85ff4 Browse files » treewide: Fix typo seperate -> separate ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
	0585980 Browse files » net: fec: Add imx25 compatible property ... The i.MX53 fec claims to be compatible to i.MX25 and i.MX53. In barebox we do not have to make differences between i.MX25 and i.MX27 though, so just fall back to i.MX27. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
	4cbec97 Browse files » mtd: dataflash: Add devicetree probing support ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
	56dd3c6 Browse files » spi: improve devicetree support ... - zero spi_board_info structure to not accidently pass unitilialized fields - parse spi-max-frequency property from devicetree - parse mode flags from devicetree Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
	4b77e45 Browse files » pinctrl: imx-iomux-v3: only register pinctrl when device node is available ... The pinctrl support is devicetree only, so only register it when we actually have a devicetree. Otherwise we crash boards using the iomux-v3 from platform code in pinctrl_register(). Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 21 May 2013
2013-05-20	5b79cee Browse files » i2c: Add support for dynamic i2c bus numbers ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 May 2013
2013-05-20	5cee215 Browse files » i2c: remove dead code ... Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Sascha Hauer committed on 20 May 2013